We present a numerical model for calculating the temperature distribution inside resistance-heated high-pressure solid-medium axi-symmetric cell assemblies that incorporates both composition- and temperature-dependent thermal conductivity. The code was validated using both analytic solutions of simplified thermal diffusion problems and comparisons to actual laboratory experiments and was found to be reliable in matching the temperature characteristics of multi-anvil experiments. Calculations for various cell assembly designs resulted in temperature fields that are consistent with experimental measurements of thermal gradients. These calculations also illustrated the influence of temperature-dependence of thermal conductivity, an important and often-overlooked property, on the thermal profiles. This model may be used to fine-tune the design of cell assemblies, either to minimize thermal gradients or to produce a desired temperature distribution. The four “typical” multi-anvil cells that we used to demonstrate this technique have temperature profiles across the sample that range from 25 to 75 °C when the thermocouple temperature is 1200 °C. The thermocouple in all four is in a region where the temperature gradient is on the order of 100 °C per millimeter, which could lead to experimental temperature uncertainties that are correlated with the thermocouple location.
-AlOOH has been shown to be stable at the pressure–temperature conditions of the lower mantle. However, its stability remains uncertain at the conditions expected for the lowermost mantle where temperature is expected to rise quickly with increasing depth. Our laser-heated diamond-anvil cell experiments show that -AlOOH undergoes dehydration at ∼2000 K above 90 GPa. This dehydration temperature is lower than geotherm temperatures expected at the bottom ∼700 km of the mantle and suggests that -AlOOH in warm slabs would dehydrate in this region. Our experiments also show that the released H O from dehydration of -AlOOH can react with metallic iron, forming iron oxide, iron hydroxide, and possibly iron hydride. Our observations suggest that H O from the dehydration of subducting slabs, if it occurs, could alter the chemical composition of the surrounding mantle and core regions.
A new series of high-pressure cells for in situ multi-anvil experiments is described. The cells are based on the conventional COMPRES cells, but modifications are made to improve the passage of X-rays. The modifications include cutting slits in parts of the assemblies that have very high X-ray absorption, such as lanthanum chromite and rhenium, the use of low-Z thermal insulation, such as forsterite, in place of zirconia, and the partial replacement of zirconia by MgO equatorial windows combined with a mullite octahedron. Details of the designs, thermal characterizations, and examples of the application of these cells are described.
The bridgmanite–akimotoite–majorite (Bm–Ak–Mj or BAM) triple point in MgSiO3 has been measured in large-volume press (LVP; COMPRES 8/3 assembly) and laser-heated diamond anvil cell (LHDAC). For the LVP data, we calculated pressures from the calibration provided for the assembly. For the LHDAC data, we conducted in situ determination of pressure at high temperature using the Pt scale at synchrotron. The measured temperatures of the triple point are in good agreement between LVP and LHDAC at 1990–2000 K. However, the pressure for the triple point determined from the LVP is 3.9 ± 0.6 GPa lower than that from the LHDAC dataset. The BAM triple point determined through these experiments will provide an important reference point in the pressure–temperature space for future high-pressure experiments and will allow mineral physicists to compare the pressure–temperature conditions measured in these two different experimental methods.
27 November 2014 in Journal of the American Ceramic Society