We propose a new method for laminate stacking sequence optimization based on a two-level approximation and genetic algorithm (GA), and establish an optimization model including continuous size variables (thicknesses of plies) and discrete variables (0/1 variables that represent the existence of each ply). To solve this problem, a first-level approximate problem is constructed using the branched multipoint approximate (BMA) function. Since mixed-variables are involved in the first-level approximate problem, a new optimization strategy is introduced. The discrete variables are optimized through the GA. When calculating the fitness of each member in the population of GA, a second-level approximate problem that can be solved by the dual method is established to obtain the optimal thicknesses corresponding to the each given ply orientation sequence. The two-level approximation genetic algorithm optimization is performed starting from a ground laminate structure, which could include relatively arbitrarily discrete set of angles. The method is first applied to cylindrical laminate design examples to demonstrate its efficiency and accuracy compared with known methods. The capacity of the optimization strategy to solve more complex problems is then demonstrated using a design example. With the presented method, the stacking sequence in analytical tools can be directly taken as design variables and no intermediate variables need be adopted.
20 November 2013 in Structural and Multidisciplinary Optimization
Truss size and topology optimization problems have recently been solved mainly by many different metaheuristic methods, and these methods usually require a large number of structural analyses due to their mechanism of population evolution. A branched multipoint approximation technique has been introduced to decrease the number of structural analyses by establishing approximate functions instead of the structural analyses in Genetic Algorithm (GA) when GA addresses continuous size variables and discrete topology variables. For large-scale trusses with a large number of design variables, an enormous change in topology variables in the GA causes a loss of approximation accuracy and then makes optimization convergence difficult. In this paper, a technique named the label–clip–splice method is proposed to improve the above hybrid method in regard to the above problem. It reduces the current search domain of GA gradually by clipping and splicing the labeled variables from chromosomes and optimizes the mixed-variables model efficiently with an approximation technique for large-scale trusses. Structural analysis of the proposed method is extremely reduced compared with these single metaheuristic methods. Numerical examples are presented to verify the efficacy and advantages of the proposed technique.
16 September 2015 in Mathematical Problems in Engineering
Laminated composites have been widely applied in aerospace structures; thus optimization of the corresponding stacking sequences is indispensable. Genetic algorithms have been popularly adopted to cope with the design of stacking sequences which is a combinatorial optimization problem with complicated manufacturing constraints, but they often exhibit high computational costs with many structural analyses. A genetic algorithm using a two-level approximation (GATLA) method was proposed previously by the authors to obtain the optimal stacking sequences, which requires significantly low computational costs. By considering practical engineering requirements, this method possesses low applicability in complicated structures with multiple laminates. What is more, it has relatively high dependence on some genetic algorithm control parameters. To address these problems, now we propose an improved GA with two-level approximation (IGATLA) method which includes improved random initial design, adaptive penalty fitness function, adaptive crossover probability, and variable mutation probability, as well as enhanced validity check criterion for multiple laminates. The efficiency and feasibility of these improvements are verified with numerical applications, including typical numerical examples and industrial applications. It is shown that this method is also able to handle large, real world, industrial analysis models with high efficiency.