Accurate, high-resolution maps of for crop growth monitoring are strongly needed by precision agriculture. The information source for such maps has been supplied by satellite-borne radars and optical sensors, and airborne and drone-borne optical sensors. This article presents a novel methodology for obtaining growth deficit maps with an accuracy down to 5 cm and a spatial resolution of 1 m, using differential synthetic aperture radar interferometry (DInSAR). Results are presented with measurements of a drone-borne DInSAR operating in three bands—P, L and C. The decorrelation time of L-band for coffee, sugar cane and corn, and the feasibility for growth deficit maps generation are discussed. A model is presented for evaluating the growth deficit of a corn crop in L-band, starting with 50 cm height. This work shows that the drone-borne DInSAR has potential as a complementary tool for precision agriculture.

Differential synthetic aperture radar interferometry (DInSAR) has been widely applied since the pioneering space-borne experiment in 1989, and subsequently with the launch of the ERS-1 program in 1992. The DInSAR technique is well assessed in the case of space-borne SAR data, whereas in the case of data acquired from aerial platforms, such as airplanes, helicopters, and drones, the effective application of this technique is still a challenging task, mainly due to the limited accuracy of the information provided by the navigation systems mounted onboard the platforms. The first airborne DInSAR results for measuring ground displacement appeared in 2003 using L- and X-bands. DInSAR displacement results with long correlation time in P-band were published in 2011. This letter presents a SAR system and, to the best of our knowledge, the first accuracy assessment of the DInSAR technique using a drone-borne SAR in L-band. A deformation map is shown, and the accuracy and resolution of the methodology are presented and discussed. In particular, we have obtained an accuracy better than 1 cm for the measurement of the observed ground displacement. It is in the same order as that achieved with space-borne systems in C- and X-bands and the airborne systems in X-band. However, compared to these systems, we use here a much longer wavelength. Moreover, compared to the satellite experiments available in the literature and aimed at assessing the accuracy of the DInSAR technique, we use only two flight tracks with low time decorrelation effects and not a big data stack, which helps in reducing the atmospheric effects.

This article presents a novel method for predicting the sugarcane harvesting date and productivity using a three-band imaging radar. Taking advantage of working with a multi-band radar, this system was employed to estimate the above-ground biomass (AGB), achieving a root-mean-square error (RMSE) of 2 kg m⁻² in sugarcane crops, which is an unprecedented result compared with other works based on the Synthetic Aperture Radar (SAR) system. By correlating the field measurements of the ripening index (RI) with the AGB measurements by radar, an indirect estimate of the RI by the radar is obtained. It is observed that the AGB reaches its maximum approximately 280 days after planting and the maximum RI, which defines the harvesting date, approximately 360 days after planting for the species IACSP97-4039. Starting from an AGB map collected by the radar, it is then possible to predict the harvesting date and the corresponding productivity with competitive average errors of 8 days and 10.7%, respectively, with three months in advance, whereas typical methods employed on a test site achieve an average error of 30 days with three months in advance. To the best of our knowledge, it is the first time that a multi-band radar is employed for productivity prediction in sugarcane crops.

The paper introduces a novel approach for estimating soil moisture in vegetated surfaces, specifically focusing on sugarcane crops throughout various growth stages in agriculture applications. While existing models typically address bare soil scenarios, this model utilizes data from P-, L-, and C-band Synthetic Aperture Radar (SAR) to estimate soil moisture. The semi-empirical Dubois model forms the basis of the proposed model, which has been adapted to accommodate multiband operation and crop height variations. Synthetic datasets are generated using the adjusted model to train two neural networks incorporated into the overall model. Additionally, a linear expression for estimating crop height is integrated into the model. The model is validated in an Experimental Site at the School of Agricultural Engineering, UNICAMP, and an independent area at the Sugarcane Technology Center in Piracicaba, Brazil. The model utilizes a multiband drone-borne SAR system with a 3-meter image resolution and radiometric accuracy of 0.5 dB. The results indicate that the model can estimate soil moisture with root-mean-square errors of 0.05 cm3.cm-3 (5 vol. %) across crop heights ranging from zero to 2.5 meters.