Light confined to a single atomic layer: The development of nanophotonic technology is reliant on the ability to confine light to spatial dimensions much less than the wavelength of the light itself. Typically, however, in metal plasmonic approaches, there is a trade-off between confinement and losses. Alcaraz Iranzo et al. fabricated heterostructures comprising monolayers of graphene and hexagonal boron nitride (hBN) and an array of metallic rods. The light was confined vertically (as propagating plasmons) between the metal and the graphene, even when the insulating hBN spacer was just a single monolayer. Such heterostructures should provide a powerful and versatile platform for nanophotonics. Science , this issue p. 291
The performance and reliability of large-area graphene grown by chemical vapor deposition are often limited by the presence of wrinkles and the transfer-process-induced polymer residue. Here, we report a transfer approach using paraffin as a support layer, whose thermal properties, low chemical reactivity and non-covalent affinity to graphene enable transfer of wrinkle-reduced and clean large-area graphene. The paraffin-transferred graphene has smooth morphology and high electrical reliability with uniform sheet resistance with ~1% deviation over a centimeter-scale area. Electronic devices fabricated on such smooth graphene exhibit electrical performance approaching that of intrinsic graphene with small Dirac points and high carrier mobility (hole mobility = 14,215 cm2 V−1 s−1; electron mobility = 7438 cm2 V−1 s−1), without the need of further annealing treatment. The paraffin-enabled transfer process could open realms for the development of high-performance ubiquitous electronics based on large-area two-dimensional materials.
Light under compression: The ability to confine light to volumes much smaller than the wavelength produces high electromagnetic fields that can then be exploited in chemical and biological sensing and detection applications. Using silver nanocubes placed on a graphene surface, Epstein et al. developed a single, nanometer-scale acoustic graphene plasmon cavity device that can confine mid-infrared and terahertz radiation with mode volume confinement factors of 5 × 10 –10 . With the response being dependent on the size of the nanocube and electrically tunable, the results demonstrate a powerful platform with which to develop sensors in what has been a challenging wavelength regime where molecular fingerprints reside. Science , this issue p. 1219
With the development of microelectronic devices having miniaturized and integrated electronic components, an efficient thermal management system with lightweight materials, which have outstanding thermal conductivity and processability, is becoming increasingly important. Recently, the use of polymer-based thermal management systems has attracted much interest due to the intrinsic excellent properties of the polymer, such as the high flexibility, low cost, electrical insulation, and excellent processability. However, most polymers possess low thermal conductivity, which limits the thermal management applications of them. To address the low thermal conduction of the polymer materials, many kinds of thermally conductive fillers have been studied, and the carbon-based polymer composite is regarded as one of the most promising materials for the thermal management of the electric and electronic devices. In addition, the next generation electronic devices require composite materials with various additional functions such as flexibility, low density, electrical insulation, and oriented heat conduction, as well as ultrahigh thermal conductivity. In this review, we introduce the latest papers on thermally conductive polymer composites based on carbon fillers with sophisticated structures to meet the above requirements. The topic of this review paper consists of the following four contents. First, we introduce the design of a continuous three-dimensional network structure of carbon fillers to reduce the thermal resistance between the filler–matrix interface and individual filler particles. Second, we discuss various methods of suppressing the electrical conductivity of carbon fillers in order to manufacture the polymer composites that meet both the electrical insulation and thermal conductivity. Third, we describe a strategy for the vertical alignment of carbon fillers to improve the through-plane thermal conductivity of the polymer composite. Finally, we briefly mention the durability of the thermal conductivity performance of the carbon-based composites. This review presents key technologies for a thermal management system of next-generation electronic devices.
MXenes, a family of 2D transition metal carbides, nitrides, and carbonitrides, have attracted significant attention due to their exceptional physicochemical properties and electrochemical performance, making them highly promising for diverse applications, particularly in energy storage. Despite notable advancements, MXene synthesis remains a critical challenge, as conventional methods often rely on hazardous hydrofluoric acid-based processes, posing substantial environmental and safety risks. In this study, we present an eco-friendly synthesis approach for MXenes using molten salt processes, which offer a safer, sustainable alternative while enabling scalable production. Additionally, we explore the development of high-performance battery anodes by fabricating nanocomposites of nano-silicon and MXene, followed by a bio-inspired polydopamine coating and carbonization process. This innovative strategy not only enhances the structural stability and electrochemical performance of the anodes but also aligns with environmentally conscious design principles. Our findings demonstrate the potential of eco-friendly MXene synthesis and nanocomposite materials in advancing sustainable energy storage technologies.