Jana Frankovska

Prof. Jana Frankovska


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2010 in Geosynthetics International
Verified
Journal Article
Closed access
JFJana Frankovska
Jana Frankovska
Slávka AndrejkovičováSlávka Andrejkovičová
Slávka Andrejkovičová
IJIvan Janotka
Ivan Janotka
Sodium bentonite (Na-bentonite) is used as a sealing component in geosynthetic clay liners (GCL). Na-bentonite is very sensitive to chlorides, and flocculation occurs when it is exposed to saline environments. The purpose of this work is to investigate the properties of Na-bentonite and bentonite–palygorskite filler material for GCL in saline solutions in the range between 0.5% and 10% (0.09 and 1.8 M) NaCl concentration. The investigation has been carried out to evaluate and study the chemical and geotechnical properties of Na-bentonite and bentonite–palygorskite mixture. The observations suggest that the resistance of Na-bentonite to chlorides is increased by adding 40% palygorskite. The bentonite–palygorskite mixture is characterised by high liquid and plastic limits, and also by high water adsorption and free swell in water, crude oil and petrol. Hydraulic conductivity was determined for water and for 10% NaCl (1.80 M) solution. The results show that Na-bentonite palygorskite mixture serves as an effective absorber of both water and saline solutions up to a concentration of 10% (1.80 M) of NaCl without increasing the hydraulic conductivity.

7 August 2022 in Materials
Verified
Journal Article
Open access
PDF file
ARArsalan Raza
Arsalan Raza
IKImran Khan
Imran Khan
RTRana Faisal Tufail
Rana Faisal Tufail
JFJana Frankovska
Jana Frankovska
MMMuhammad Umar Mushtaq
Muhammad Umar Mushtaq
Muhammad Faisal JavedMuhammad Faisal Javed
Muhammad Faisal Javed
To enhance the moisture damage performance of hot mix asphalt (HMA), treating the aggregate surface with a suitable additive was a more convenient approach. In this research, two types of aggregate modifiers were used to study the effect of moisture damage on HMA. Three different aggregate sources were selected based on their abundance of use in HMA. To study the impact of these aggregate modifiers on moisture susceptibility of HMA, the indirect tensile strength test and indirect tensile modulus test were used as the performance tests. Moisture conditioning of specimens was carried out to simulate the effect of moisture on HMA. The prepared samples’ tensile strength ratio (TSR) and stiffness modulus (Sm) results indicated a decrease in the strength of the HMA after moisture conditioning. After treating the aggregate surface with additives, an improvement was seen in dry and wet strength and stiffness. Moreover, an increasing trend was observed for both additives. The correlation between TSR and strength loss reveals a strong correlation (R2 = 0.7219). Also, the two additives indicate increased wettability of asphalt binder over aggregate, thus improving the adhesion between aggregate and asphalt binder.

1 January 2015 in Procedia Earth and Planetary Science
Verified
Journal Article
Open access
JFJana Frankovska
Jana Frankovska
MKMiloslav Kopecký
Miloslav Kopecký
JPJakub Panuška
Jakub Panuška
JCJuraj Chalmovský
Juraj Chalmovský
This article is dealing with stability of the highway cut in Eastern Slovakia. The cut is situated in rock environment of the Carpathian flysch, which in area of the cut mostly consists of shale with different degree of weathering. The cut is supported by an anchored pile wall. Rock environment is changing from the surface to the depth from alluvium clays, sands and completely weathered shale to fresh shale. The potential slip surface was investigated after evaluation of data from geotechnical monitoring, so stability of the pile wall has to be analyzed. Finite element analysis was done and two material models were compared to results of geotechnical monitoring. Deformation analysis and the safety factor are discussed. Two models were compared in these terms: Mohr - Coulomb material model and jointed rock material model. These models are introduced because of shale anisotropy and simplification of behavior model via jointed rock model. Jointed rock model was introduced as an anisotropic model and required geotechnical parameters for calculations are discussed in comparison with the Mohr – Coulomb material model. Anisotropic behavior of shale will be discussed and analyzed. Short recommendations for the use of these models are presented in the paper.

6 June 2018 in ce/papers
Verified
Journal Article
Closed access
PDF file
MKMarian Kuvik
Marian Kuvik
JFJana Frankovska
Jana Frankovska
LSLadislav Stolárik
Ladislav Stolárik

6 June 2018 in ce/papers
Verified
Journal Article
Closed access
PDF file
PMPeter Mušec
Peter Mušec
JFJana Frankovska
Jana Frankovska
VJViktor Janták
Viktor Janták