A compact wearable antenna with a novel miniaturized electromagnetic bandgap (EBG) structure at 2.4 GHz for medical application is presented in this letter. The design demonstrates a robust, compact, and low-profile solution to meet the requirements of wearable applications. The EBG structure reduces the back radiation and the impact of frequency detuning due to the high losses of human body. In addition, the structure improves the front-to-back ratio (FBR) by 15.5 dB. The proposed compact antenna with dimensions of 46 × 46 × 2.4 mm ³ yields an impedance bandwidth of 27% (2.17-2.83 GHz), with a gain enhancement of 7.8 dBi and more than 95% reduction in the specific absorption rate. Therefore, the antenna is a promising candidate for integration into wearable devices applied in various domains, specifically biomedical technology.

A novel printed diversity monopole antenna is presented for WiFi/WiMAX applications. The antenna comprises two crescent shaped radiators placed symmetrically with respect to a defected ground plane and a neutralization lines is connected between them to achieve good impedance matching and low mutual coupling. Theoretical and experimental characteristics are illustrated for this antenna, which achieves an impedance bandwidth of 54.5% (over 2.4-4.2 GHz), with a reflection coefficient <;-10 dB and mutual coupling <;-17 dB. An acceptable agreement is obtained for the computed and measured gain, radiation patterns, envelope correlation coefficient, and channel capacity loss. These characteristics demonstrate that the proposed antenna is an attractive candidate for multiple-input multiple-output portable or mobile devices.

The demand for wearable technologies has grown tremendously in recent years. Wearable antennas are used for various applications, in many cases within the context of wireless body area networks (WBAN). In WBAN, the presence of the human body poses a significant challenge to the wearable antennas. Specifically, such requirements are required to be considered on a priority basis in the wearable antennas, such as structural deformation, precision, and accuracy in fabrication methods and their size. Various researchers are active in this field and, accordingly, some significant progress has been achieved recently. This article attempts to critically review the wearable antennas especially in light of new materials and fabrication methods, and novel designs, such as miniaturized button antennas and miniaturized single and multi-band antennas, and their unique smart applications in WBAN. Finally, the conclusion has been drawn with respect to some future directions.

A miniaturized textile antenna is designed and demonstrated for ISM band applications at 2.4 GHz. The proposed antenna uses appropriate loading of a rectangular slot/notch with a strip line inserted to form an inverted E-shaped antenna. The structure is simple, compact, and easy to manufacture using only fabric material. The antenna size is 75% smaller than a conventional antenna. When the antenna is subjected to bending, its performance proves sustainable under deformation. Each slot/notch and strip line is translated to its equivalent circuit and then integrated to form the whole equivalent circuit of the proposed antenna. The results from the equivalent circuits and simulation show acceptable agreement. The antenna shows an improvement of size miniaturization of 30×20×0.7 mm ³ and demonstrates an impedance bandwidth of 15% and efficiency of 79%, showing that it is a promising candidate for incorporation into wearable systems.

A wearable fabric CPW antenna is presented for medical body area network (MBAN) applications at 2.4 GHz based on an electromagnetic bandgap design and frequency selective surface (EBG-FSS). Without EBG-FSS, the basic antenna has an omnidirectional radiation pattern, and when operated close to human tissue, the performance and efficiency degrade, and there is a high specific absorption rate. To overcome this problem, the antenna incorporates EBG-FSS, which reduces the backward radiation, with SAR reduced by 95%. The gain is improved to 6.55 dBi and the front-to-back ratio is enhanced by 13 dB compared to the basic antenna. The overall dimensions of the integrated design are 60 × 60 × 2.4 mm ³ . Simulation and experimental studies reveal that the antenna integrated with EBG-FSS can tolerate loading by human tissue as well as bending. Thus, the design is a good candidate for MBAN applications.

The recent advancement in the wireless technology has led to the advent of wearable antennas. These antennas are utilized for Wireless Body Area Networks (WBANs) purposes such as health-care, military sportive activities and identification systems. Compared to conventional antennas, wearable antennas operate in an environment which is in highly near proximity to the curved human body. Therefore, the wearable/flexible antenna performance parameters, including reflection coefficient, bandwidth, directivity, gain, radiation characteristic, Specific Absorption Rate (SAR), and efficiency are anticipated to be influenced by the coupling and absorption by the human body tissues. In addition, an electromagnetic band-gap structure is introduced in the wearable/flexible antenna designs to enable and give a high degree of isolation from the human body which also decreases the SAR dramatically. This paper reviews the state-of-the-art wearable/flexible antennas integrated with the electromagnetic band-gap structure on flexible materials concentrating on single and dual-band designs. Besides, it also highlights the challenges and considerations for an appropriate wearable/flexible antenna.