Rechargeable potassium-ion batteries have been gaining traction as not only promising low-cost alternatives to lithium-ion technology, but also as high-voltage energy storage systems. However, their development and sustainability are plagued by the lack of suitable electrode materials capable of allowing the reversible insertion of the large potassium ions. Here, exploration of the database for potassium-based materials has led us to discover potassium ion conducting layered honeycomb frameworks. They show the capability of reversible insertion of potassium ions at high voltages (~4 V for K2Ni2TeO6) in stable ionic liquids based on potassium bis(trifluorosulfonyl) imide, and exhibit remarkable ionic conductivities e.g. ~0.01 mS cm−1 at 298 K and ~40 mS cm–1 at 573 K for K2Mg2TeO6. In addition to enlisting fast potassium ion conductors that can be utilised as solid electrolytes, these layered honeycomb frameworks deliver the highest voltages amongst layered cathodes, becoming prime candidates for the advancement of high-energy density potassium-ion batteries.
1 January 2011 in Journal of the Electrochemical Society
Li metal rechargeable batteries have attracted much attention as a candidate for post-Li-ion batteries with higher power voltage and higher energy density. The application of room temperature ionic liquids (RTILs) to the electrolyte instead of nonaqueous electrolytes has been studied with the aim of improvement of the film property on the Li metal/electrolyte interface in order to put the Li metal rechargeable batteries into practice. In this study, the behaviors of Li plating and plating–stripping cycle property were investigated with organic additives [vinylene carbonate (VC) or ethylene sulfite (ES)] added to an RTIL (PP13[TFSA]). A more circular shape of deposit is obtained just after first plating when the organic additives are used, indicating that the organic additives suppress the local growth of Li deposition. Better cycling property and reproducibility are obtained when the organic additives are used, which is consistent with the result after first plating. Therefore, using additives in combination with RTIL-based electrolytes is advantageous.
Amorphous VS4 (a-VS4) is prepared from the crystalline one (c-VS4). Li insertion into a-VS4 involves the amorphous–amorphous phase transition from Peierls-distorted chain-like structure to [VS4]3− tetrahedra-based structure.
Li metal is the ultimate anode material for rechargeable Li batteries because of its high capacity and low electrochemical potential. However, Li metal anodes suffer from low Coulombic efficiency and poor cycling stability owing to the growth of Li dendrites. In this study, we report that a localized high-concentration electrolyte comprising lithium bis(fluorosulfonyl)imide (LiFSI), ethylene carbonate (EC), propylene carbonate (PC), and 1,1,2,2-tetrafluoroethyl 2,2,3,3-tetrafluoropropyl ether (HFE) achieves stable Li plating/stripping cycling with a Coulombic efficiency of >98 %. In contrast to LiFSI/EC : PC electrolytes, this electrolyte shows good wettability on a polypropylene separator. Li metal deposited in this electrolyte displays a large, granular, and dense morphology. Spectroscopic analyses confirm strong FSI−–Li+ coordination in this electrolyte, leading to the formation of a solid electrolyte interphase (SEI) layer enriched with LiF and sulfurous compounds derived from FSI−. These results indicate that the SEI layer facilitates the deposition of compact Li and effectively prevents Li loss owing to electrolyte decomposition and dead Li formation, resulting in highly reversible Li plating/stripping cycling. This electrolyte design can be an effective strategy for developing high-energy-density Li metal batteries.