The spanwise distribution of impeller exit circulation (SDIEC) has a significant effect on the impeller performance, therefore, there is a need for its consideration in the optimization design of mixed-flow pumps. In this study, a combination optimization system, including a 3D inverse design method (IDM), computational fluid dynamics (CFD), Latin hypercube sampling (LHS) method, response surface model (RSM), and non-dominated sorting genetic algorithm (NSGA-Ⅱ) was used to improve the performance of the mixed-flow pump after considering the effect of SDIEC on the performance of the impeller. The CFD results confirm the accuracy and credibility of the optimization results because of the good agreement the CFD results established with the experimental measurements. Compared with the original impeller, the pump efficiency of the preferred impeller at 0.8Q_des, 1.0Q_des, and 1.2Q_des improved by 0.63%, 3.39%, and 3.77% respectively. The low-pressure region on the blade surface reduced by 96.92% while the pump head difference was less than 1.84% at the design point. In addition, a comparison of the flow field of the preferred impeller and the original impeller revealed the effect of SDIEC on mixed-flow pump performance improvement and flow mechanism.

This study proposed a kind of optimization design for a reversible axial-flow pump based on an ordinary one-way pump. Three-dimensional (3D) Reynolds-averaged Navier–Stokes (RANS) equations was used to predict the pump performance, and the optimized design was validated by an external characteristic test. Six main geometry parameters of an impeller and diffuser based on an orthogonal experiment were set as design variables. The efficiency and head under forward and reverse design conditions were set as the optimization objective. Based on 120 groups of sample designs obtained from Latin hypercube sampling (LHS), a two-layer artificial neural network (ANN) was used to build a non-linear function with high accuracy between the design variables and optimization objective. The optimized design was obtained from 300 groups of Pareto-optimal solutions using the non-dominated based genetic algorithm (NSGA) for multiobjective optimization. After optimization, there was a slight decrease in the forward pump efficiency and head. The reverse pump efficiency and head on the other hand was largely improved and the high efficiency range was also widened.