A recent assessment (Giovannelli, G., D'Urzo, L., Maggiulli, G., Natali, S., Pagliara, C., Sgura, I. & Bozzini, B. 2010. Journal of Solid State Electrochemistry, 14: 479–94.) of the corrosion state of a late Bronze Age artefact (ca. 1100 BCE) exposed to a coastal environment, based on optical and scanning electron microscopies, X-ray fluorescence mapping, and X-ray diffractometry, led to recognition of bronze disease conditions essentially related to the presence of nantokite locked inside mesoscopic subsurface pits. The object was then treated successfully with a novel electrochemical approach specifically designed to allow penetration of the electric field into deep, screened pits. In order to further develop and optimize this promising approach by fine-tuning the capabilities of electrochemical control, more insight is required on the specific morphochemistry of the corrosion product scenario. To this end, here we report a space-dependent compositional and chemical-state analysis, performed with synchrotron-based scanning photoelectron microspectroscopy. The investigated object consists of a segregated cast bronze. The prevailing corrosion form is preferential attack of Sn-rich phases, accompanied by a synergistic type of Sn and Cu attack triggered by the peculiar type of decuprification taking place in a bronze disease framework and characterized by the formation of Sn(OH)Cl as a result of local HCl generation in the Cu corrosion process.

In this paper we discuss the effects of deslagging practices and the size of electric arc furnace (EAF) slags on structural, microstructural, composition and leaching tests. The samples were collected from seven steelmakers located in Brescia (Lombardy Region, Italy). Nine granularity fractions of four samples were tested to evaluate the influence of the granularity on the leaching tests. The results showed that, in general, the release of the elements arises when the size of the particle decreases, except in one sample, in which vanadium and zinc displayed the opposite trend. X-ray diffraction results suggest that behavior may be ascribed to the effect of the grinding, which causes a different percentage of the phases in the various fractions. In conclusion, the possible effects of the size should also be carefully considered when defining new leaching test requirements for EAF slags.

This work aims at presenting the use of new technologies in the field of forensic engineering. In particular, the use of UAV photogrammetry and laser scanning is compared with the traditional methods of surveying an accident site. In this framework, surveys must be carried out promptly, executed in a short time and performed so that the greatest possible amount of information is collected with sufficient accuracy to avoid the possibility of neglecting details once that the scene is no longer preserved. The combination of modern surveying techniques such UAV photogrammetry and laser scanning can properly fulfill these requirements. An experimental test has been arranged and instruments, procedures, settings, practical limits and results have been evaluated and compared with respect to the usual way of performing the survey for forensic purposes. In particular, both qualitative and quantitative considerations are given, assessing the completeness of the reconstructed model, the statistical evaluation of the errors and the accuracy achieved.

Electric arc furnace (EAF) slags were investigated by micro-Raman spectroscopy. A slag sample characterised by well-developed crystalline phases was obtained. The EDXS elemental composition made it possible to recognize the grains corresponding to the brownmillerite, larnite and magnesioferrite phases, as identified by XRD in the same powdered sample. The grains were collected and analysed by µ-Raman spectra, and the results showed good reproducibility in each grain and good agreement with spectra of the phases reported in the literature. A Raman database devoted to crystalline phases of EAF slag identification was created to be used by portable Raman instruments, allowing the phase characterisation of the slag directly during steel production.

Auxetic materials have recently attracted interest in the field of crashworthiness thanks to their peculiar negative Poisson ratio, leading to densification under compression and potentially being the basis of superior behavior upon impact with respect to conventional cellular cores or standard solutions. However, the empirical demonstration of the applicability of auxeticity under impact is limited for most known geometries. As such, the present work strives to advance the investigation of the impact behavior of auxetic meta-materials: first by selecting and testing representative specimens, then by proceeding with an experimental and numerical study of repeated impact behavior and penetration resistance, and finally by proposing a new design of a metallic auxetic absorber optimized for additive manufacturing and targeted at high-performance crash applications.