Usually, it is subjective, laborious, and inefficient about the traditional water-based air-tightness test. In this article, a mechanism and method of leak detection for a pressure vessel is proposed. First, through collecting and analyzing sequential pressure data, the beginning time of the air-tightness test phase is determined. Second, pressure vessels are located using a deep convolutional neural network (DCNN)-based method and relocation strategy. Third, a method that employs a subregion voting strategy, background modeling, and sequential pressure data is proposed to determine whether, where, and how a pressure vessel leaks. An improved pressure vessel air-tightness test mechanism is developed to provide the basic support for leak detection framework and improve test efficiency. On the independent data set, the accuracy of the proposed leak location method is 98%, and the maximum error of the leakage calculation is 2.14 mL/min. Experiments show that the proposed leak detection framework and mechanism can greatly improve the efficiency and reliability of pressure vessel leak detection.
16 June 2022 in IEEE Transactions on Geoscience and Remote Sensing
We present a novel 3-D instance segmentation framework for multiview stereo (MVS) buildings in urban scenes. Unlike existing works focusing on semantic segmentation of urban scenes, the emphasis of this work lies in detecting and segmenting 3-D building instances even if they are attached and embedded in a large and imprecise 3-D surface model. Multiview red green blue (RGB) images are first enhanced to RGB height (RGBH) images by adding a heightmap and are segmented to obtain all roof instances using a fine-tuned 2-D instance segmentation neural network. Instance masks from different multiview images are then clustered into global masks. Our mask clustering accounts for spatial occlusion and overlapping, which can eliminate segmentation ambiguities among multiview images. Based on these global masks, 3-D roof instances are segmented out by mask back-projections and extended to the entire building instances through a Markov random field optimization. A new dataset that contains instance-level annotation for both 3-D urban scenes (roofs and buildings) and drone images (roofs) is provided. To the best of our knowledge, it is the first outdoor dataset dedicated to 3-D instance segmentation with much more annotations of attached 3-D buildings than existing datasets. 1 Quantitative evaluations and ablation studies have shown the effectiveness of all major steps and the advantages of our multiview framework over the orthophoto-based method.
22 April 2019 in IEEE Transactions on Instrumentation and Measurement
Manual approaches of fiber recognition are often time-consuming, laborious and subjective. In this paper, a novel vision-based measurement (VBM) framework of fiber recognition based on image segmentation and deep convolutional neural networks (DCNN) is proposed. The proposed segmentation method can be applied to the segmentation of overlapping and adhering translucent fibers, and has better segmentation performance. At the same time, the segmentation method provides a large number of single fiber training samples and test samples for DCNN, and provides a basis for multi-fiber map recognition using voting strategies. Finally, four frequently-used kinds of fibers, i.e. cotton, camel hair, viscose and yak cashmere, are selected for experiments. In order to decrease the chance of over-fitting, data augmentation methods are utilized to enlarge the datasets formed by the segmented single fiber images. In the experimental phase, performance differences are evaluated between the four network architectures, namely AlexNet, CAWC-Net, VGG-Net-16, and GoogLeNet. GoogLeNet’s single fiber classification accuracy rate reaches 96.6accuracy rate of multi-fiber identification strategy reaches 99.5The results show that the proposed VBM framework of fiber recognition is effective.
29 January 2021 in IEEE Transactions on Circuits and Systems for Video Technology
In the area of change detection, there were a rare number of optimization methods. Most of the optimization methods that are used by change detection are morphological transformation or median filtering, which cannot best optimize change detection algorithm. In this paper, a general post-processing algorithm for change detection is proposed. We believe that some problems cannot be avoided in the area of change detection such as 1) region of moving object generated by change detection is slightly larger than the ground-truth and 2) there are always some disjoint and small regions that are independent from the moving objects. To address the problem, our method can optimize the change detection algorithm bases on the idea of edge detection, which can remove the wrong edge or pixel. In the experiments, more than 20 change detection algorithms that include the best algorithm in ChangeDetection.net are selected. Most of these change detection algorithms are optimized by the proposed method on PWC, Precision, and FMeasure, where, our optimized algorithm named FgSegNet_v2 is better than all other algorithms in the CDnet. The best-optimized margin of PWC is 0.64, and the fast speed is 548FPS on CPU. Our approach can better resolve the afore-mentioned problems that cannot be avoided and is general and fast. The experiments can be reproduced with C++ on Github https://github.com/walty19950301/CDA-contour-optimizer .
1 June 2014 in Engineering Applications of Artificial Intelligence
Aiming at the accurate and effective coaxiality measurement of twist drills with irregular surface, an optical measurement mechanism is proposed in this article. First, a high-precision rotation instrument based on four core units is designed, which can obtain 3-D point cloud data of twist drills at all angles. Second, in the data processing stage, an improved robust Gaussian mixture model is proposed for accurate and rapid blade back segmentation. To improve the measurement efficiency, a rapid reconstruction method of twist drill axis based on orthogonal synthesis is proposed, which can rapidly locate the maximum deviation between the actual axis and the reference by using the extracted blade back data. Finally, by calculating the maximum radial Euclidean distance from the benchmark, the coaxiality error of the twist drill is obtained. Compared with other measurement methods, the experimental results show that our proposed method performs well with high efficiency of less than 3 s/pc and the average measurement error is about 0.020 mm. The experimental results and uncertainty analysis show that the proposed method is effective and automatic and can be applied to the coaxiality measurement of twist drills of various specifications.