This paper focuses on the opportunity to use multiple star trackers to help space situational awareness and space surveillance. Catalogs of space debris around Earth are usually based on ground-based measurements, which rely on data provided by ground-based radar observations and ground-based optical observations. However, space-based observations offer new opportunities because they are independent of the weather and the circadian rhythms to which the ground system is subjected. Consequently, space-based optical observations improve the possibility of space debris detection and cataloging. This work deals with a feasibility study of an innovative strategy, which consists of the use of a star sensor with a dedicated algorithm to run directly on board. This approach minimizes the impact on the original mission of the satellite, and on this basis, it has also the function of space debris monitoring. Therefore, theoretically, every satellite with a star tracker can be used as a space surveillance observer. In this paper, we propose a multi-star space debris detecting and positioning method with constant geocentric observation. Using the multi-star tracker joint positioning method, the angle measurement data of the star tracker is converted into the spatial coordinates of the target. In addition, the Gaussian MMSE difference correction algorithm is used to realize the target positioning of multiple optical observations, and the spatial target position information of the multi-frame images is fused, thus completing the solution of the orbit equation. The simulation results show that the proposed method is sufficient to detect and position space debris. It also demonstrates the necessity and feasibility of cooperative network observation by multiple star trackers.
Many classic visual monocular SLAM (simultaneous localization and mapping) systems have been developed over the past decades, yet most of them fail when dynamic scenarios dominate. DM-SLAM is proposed for handling dynamic objects in environments based on ORB-SLAM2. This article mainly concentrates on two aspects. Firstly, we proposed a distribution and local-based RANSAC (Random Sample Consensus) algorithm (DLRSAC) to extract static features from the dynamic scene based on awareness of the nature difference between motion and static, which is integrated into initialization of DM-SLAM. Secondly, we designed a candidate map points selection mechanism based on neighborhood mutual exclusion to balance the accuracy of tracking camera pose and system robustness in motion scenes. Finally, we conducted experiments in the public dataset and compared DM-SLAM with ORB-SLAM2. The experiments corroborated the superiority of the DM-SLAM.
This paper describes the multilayer voting algorithm, a novel autonomous star identification method for spacecraft attitude determination. The proposed algorithm includes two processes: an initial match process and a verification process. In the initial match process, a triangle voting scheme is used to acquire candidates of the detected stars, in which the triangle unit is adopted as the basic voting unit. During the identification process, feature extraction is implemented, and each triangle unit is described by its singular values. Then the singular values are used to search for candidates of the imaged triangle units, which further improve the efficiency and robustness of the algorithm. After the initial match step, a verification method is applied to eliminate incorrect candidates from the initial results and then outputting the final match results of the imaged stars. Experiments show that our algorithm has more robustness to position noise, magnitude noise, and false stars than the other three algorithms, the identification speed of our algorithm is largely faster than the geometric voting algorithm and optimized grid algorithm. However, it takes more memory, and SVD also seems faster.
The rapid development of sensor technology has made multi-modal remote sensing data valuable for land cover classification due to its diverse and complementary information. Many feature extraction methods for multi-modal data, combining light detection and ranging (LiDAR) and hyperspectral imaging (HSI), have recognized the importance of incorporating multiple spatial scales. However, effectively capturing both long-range global correlations and short-range local features simultaneously on different scales remains a challenge, particularly in large-scale, complex ground scenes. To address this limitation, we propose a multi-scale graph encoder–decoder network (MGEN) for multi-modal data classification. The MGEN adopts a graph model that maintains global sample correlations to fuse multi-scale features, enabling simultaneous extraction of local and global information. The graph encoder maps multi-modal data from different scales to the graph space and completes feature extraction in the graph space. The graph decoder maps the features of multiple scales back to the original data space and completes multi-scale feature fusion and classification. Experimental results on three HSI-LiDAR datasets demonstrate that the proposed MGEN achieves considerable classification accuracies and outperforms state-of-the-art methods.
A meteorological moderate resolution sensor requires large field of view (FOV) and low distortion imaging. At present, a fixed-focus camera combined with a whiskbroom scanning mechanism or a fixed-focus multi-camera combined with pushbroom scanning mechanism is being used. Owing to the fixed focal length of the camera, a large FOV causes the difference of imaging distance and ground imaging angle between the nadir point and the edge of the FOV to be significantly large, resulting in a large difference in the resolution between the nadir point and the edge of the FOV. The study proposes to simultaneously adopt a distributed zoom concentric multiscale system to realize a large FOV, low distortion, and high quality imaging to coordinate with different compensation lenses to achieve a different FOV corresponding to different focal lengths, where the resolution drop between the nadir point and the edge of the FOV is reduced. To ensure the same illumination of the entire FOV, the entire system possesses the same with different FOVs exhibiting different entrance pupil diameters. The study analyzes the principle of aberration compensation of a concentric multiscale system when both the FOV and entrance pupil diameter are changed and completes three groups of optical design of different focal lengths with uniform . The results indicate that the system has advantages of low distortion and high imaging quality in the entire FOV. Moreover, the resolution drop in the entire FOV is reduced to approximately 50% of the traditional design scheme. To verify the implementability of the system, a set of prototype manufacturing and imaging experiments are conducted to prove that the system has satisfactory implementability, and the imaging quality is also satisfactory.
The signal-variance method and the photon transfer curve method are the most valuable tools for calculating the conversion gains of charge-coupled device (CCD) detectors. This paper describes the phenomena that arise in the conversion gain measurements of space multi-band variable object monitor (SVOM) visible telescope (VT) CCDs, where the results of the signal-variance method increase with the image gray level, and the results of the photon transfer curve method appear with nonlinearity, which is caused by the signal-dependent charge sharing mechanism of back-illuminated CCDs. A numerical simulation model based on random variables was adopted to analyze the influence of the mechanism on the gain determination. The model simulates all the signals and noise in the flat field image, including the photon signal and photon-shot noise, readout noise, fixed pattern noise, and the signal-dependent charge-sharing signal, and it demonstrated agreement with the experimental data. Then, we proposed a quadratic polynomial curve-fitting formula for the photon transfer curve, and we quantitatively analyzed the relationship between the fitting coefficients and the gain, the signal-dependent charge sharing coefficient, and the full well capacity using the control variable method. Finally, the formula was used to accurately determine the conversion gains of SVOM VT CCDs.