Nowadays it is easy to imagine that the exploitation of different additive manufacturing approaches could find use in regenerative medicine and frontiers nanotechnology with a strong interest in the development of in vivo bio-incubators that better replicate the tissue environment. Various electrospinning technologies have been exploited for the fabrication of composite polymeric architectures, where fibers have been used for the construction layer by layer of micro-architectures. Unfortunately, in case of processing biomaterials, the intrinsic factors of the materials could become obstacles when considering such advanced engineering methods. Here, for the first time, we use the pyro-EHD process for the fabrication of layered three-dimensional architectures made using a biodegradable and biocompatible polymer. The proposed approach for layered 3D printing works at mild temperature allowing deposition at high resolution and great flexibility in manufacturing, avoiding high voltage generators, and nozzles. The layered 3D printing, activated by the pyro-electric effect, is discussed and characterized in terms of geometrical features and processing parameters. Different geometries and micro-architecture (wall, square, triangle, and hybrid structures) have been demonstrated and over printing of composite polymer, obtained by mixing multiwall carbon nanotubes and fluorochrome, has been discussed, focusing on the use of a biodegradable and biocompatible polymer.
5 April 2024 in ACS Applied Materials & Interfaces
We present for the first time an investigation on the spraying modality for the pyroelectrohydrodynamic (pyro-EHD) system. We show that the pyro-EHD spray (p-Spray) works well in the range from far field (d > 10 mm) to near field (d < 2 mm) without the need of external voltage and without the needs to change the experimental apparatus in that wide range of distances. Because the proposed method works without a counter electrode, no limitations are connected with the geometric shape of the substrate on which the spray coating is deposited. We report on several examples of the formation of disperse sprayed droplets, whose size can be varied between hundreds of micrometers and hundreds of nanometers, as well as on the production of sprayed pattern footpaths. The results reported here demonstrate the direct writing of spray patterns of nano/microdroplets with different materials in a very wide range, that is, from low- to high-viscous liquid solutions. Finally, as an example of application, we show the use of the p-Spray for the fabrication of silver-coated devices showing antimicrobial properties of the pattern produced by the p-Spray through a customizable and environmental friendly approach.