A low-power dual-mode receiver is presented for ultra-high-frequency (UHF) radio frequency identification (RFID) systems. The reconfigurable architecture of the tag is proposed to be compatible with low-power and high-sensitivity operating modes. The read range of RFID system and the lifetime of the tag are increased by photovoltaic, thermoelectric and RF energy-harvesting topology. The receiver is implemented in a 0.18-μm standard CMOS process and occupies an active area of 0.65 mm × 0.7 mm. For low-power mode, the tag is powered by the rectifier and the sensitivity is −18 dBm. For high-sensitivity mode, the maximum PCE of the fully on-chip energy harvester is 46.5% with over 1-μW output power and the sensitivity is −40 dBm with 880 nW power consumption under the supply voltage of 0.8 V.
A semi-passive ultrahigh frequency (UHF) radio frequency identification (RFID) system is presented. The reconfigurable architecture of tag is proposed to be compatible with passive and active operating modes. The read range of RFID system and the lifetime of tag is increases by frequency locked on-chip oscillator topology. The transceiver is implemented in 0.18µm standard CMOS process. The sensitivity of tag is −18dBm for passive mode and −40dBm for active mode with 1.2µW power consumption under the supply voltage of 0.8V. The output power is −10dBm for active transmitting mode and the power consumption is 450µW under the supply voltage of 1V.
6 May 2020 in Journal of Circuits, Systems and Computers
A MOSFET-only proportional-to-absolute temperature (PTAT) current reference is proposed. The self-cascode MOSFET (SCM) structures are adopted and operating in weak and moderate inversion regions by feedback control of the amplifier. This approach reduces the linearity error and the process variation of output current. The current reference is designed in 0.18μm standard CMOS technology with the active area of 0.011mm 2 . The process variation is 1.57% (σ/μ) by Monte Carlo simulation. The supply voltage sensitivity is 0.1%/V in range from 0.7V to 1.5V and the power consumption is 30nW under the supply voltage of 0.7V.