When planning their transport policy, cities usually focus on developing sustainable transport systems and reducing the negative consequences of transport. One way to deliver transport policies is to use the Sustainable Urban Mobility Plan (SUMP), a strategic document designed to meet the demand for mobility whilst ensuring adequate quality of life for the residents. The process of Sustainable Urban Mobility Planning (SUMP process) can be supported by using a transport model. The objective of this article is to analyse the efficacy of the Multilevel Model of Transport Systems—referred to by its acronym, MST—for the SUMP process. With its ability to represent the transport system’s behaviour depending on the level of detail, the MST can significantly benefit the SUMP process. The proposed concept of integration of the MST into the SUMP process has already been tested and applied in delivering Gdynia’s (Poland) SUMP. The paper suggests ways to use the MST at different levels of planning and modelling and describes the outcomes. Using the multilevel structure helps to fully realise the transport model’s potential to improve the effectiveness of urban mobility planning. The conclusions show that the methods proposed in the article are worthwhile and cities should consider them when planning the SUMP process.

The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be systematically identified, assessed, removed and mitigated. There are a number of approaches to road safety management. European Union Directive 2008/96/EC requires EU member states to use four basic tools of road safety infrastructure management. An overview of the methods in these countries shows a variety of approaches to how these tools are used in practice. The paper presents a systematics of these tools and a concept of how they could be developed in Poland. It looks at the life cycle of a road structure and the requirements of risk management processes. The paper focuses on elements of scientific support to help build the necessary tools. To help with assessing the impact of a road project on the safety of related roads, a method was developed for long-term forecasts of accidents and accident victims and accident cost estimation as well as a risk classification to identify risks that are not acceptable risks. With regard to road safety audits and road safety inspection, a set of principles was developed to identify risks and the basic classification of errors and omissions. In the case of road network safety management, measures of individual and societal risk were selected. A method for classifying dangerous road sections was developed as well. An estimation is given of the consequences and effects of applying the tools of road safety management on the network of national roads in Poland until 2020

The fundamental relationship of traffic flow and bivariate relations between speed and flow, speed and density, and flow and density are of great importance in transportation engineering. Fundamental relationship models may be applied to assess and forecast traffic conditions at uninterrupted traffic flow facilities. The objective of the article was to analyze and compare existing models of the fundamental relationship. To that end, we proposed a universal and quantitative method for assessing models of the fundamental relationship based on real traffic data from a Polish expressway. The proposed methodology seeks to address the problem of finding the best deterministic model to describe the empirical relationship between fundamental traffic flow parameters: average speed, flow, and density based on simple and transparent criteria. Both single and multi-regime models were considered: a total of 17 models. For the given data, the results helped to identify the best performing models that meet the boundary conditions and ensure simplicity, empirical accuracy, and good estimation of traffic flow parameters.

According to the UN, road safety is the key to achieving sustainable development goals, yet the complexity of how road accidents happen makes this a difficult challenge leaving many countries struggling with the problem. For years, Poland has infamously been one of the EU’s top countries for road-accident fatality rates. Despite that, it has made significant progress in the last thirty years with a fatality reduction of more than 60%. A number of factors have contributed to this result: improving the socioeconomic situation, improving road safety measures, changing road user behaviour and changing national road safety programmes. This article presents Poland’s approach to road safety and, in particular, Vision Zero, adopted in 2005. Poland’s road safety changed over the years as the country learned from its successes and failures. Tools for forecasting fatalities were developed and used to identify the main factors that have helped to reduce deaths. An assessment was conducted on how Poland could implement Vision Zero until 2050 under different road safety scenarios. It was found that in order to achieve the EU’s goal for 2030, Poland must reduce fatalities to 1200. While it is an ambitious goal, it is also an important step towards zero fatalities in 2050.

This paper presents an overview of factors causing driver fatigue as described in the literature. Next, a traffic crash database for 2003–2007 is used to identify the causes, circumstances and consequences of accidents caused by driver fatigue on Poland’s national roads. The results of the study were used to build a model showing the relationship between the concentration of road accidents and casualties, and the time of day. Finally, the level of relative accident risk at night-time versus daytime is defined. A map shows the risk of death and severe injury on the network of Poland’s national roads. The paper suggests to road authorities steps to reduce fatigue-related road accidents in Poland.

Since 1991 Poland's road safety has been systematically improving with a 60% reduction in road deaths. Despite the progress Poland continues to be one of the European Union’ worst performing countries. The country's main road safety problems remain unchanged: dangerous behaviour of road users, underdeveloped system of road safety management and low quality of road infrastructure. This is why subsequent road safety programmes (implemented over the 20 years) were designed to improve pedestrian safety, reduce speeding and treat sources of roadside hazards. The article gives a short diagnosis of Poland's road safety, evaluates its subsequent road safety programmes called GAMBIT 1996, GAMBIT 2000 and GAMBIT 2005 with its far-reaching Vision Zero just as in a number of countries. The main road safety problems that Poland must solve are identified. A risk-based road safety management method is outlined. An overview is given of a method for estimating fatalities in Poland as a road safety management tool. At its strategic level, the fatality estimation method uses models built on an analysis of 60 countries worldwide and calibrates them to Polish conditions. It puts special emphasis on pedestrian safety, speed management and the design and construction of safety road infrastructure. Finally, selected examples are presented to show the effectiveness of the measures and recommended actions to reduce Poland's road deaths