In this study, date-palm biochar MgAl-augmented double-layered hydroxide (biochar–MgAl–LDH) nanocomposite was synthesized, characterized, and used for enhancing the removal of phosphate and nitrate pollutants from wastewater. The biochar–MgAl–LDH had higher selectivity and adsorption affinity towards phosphate compared to nitrate. The adsorption kinetics of both anions were better explained by the pseudo-first-order model with a faster removal rate to attain equilibrium in a shorter time, especially at lower initial phosphate-nitrate concentration. The maximum monolayer adsorption capacities of phosphate and nitrate by the non-linear Langmuir model were 177.97 mg/g and 28.06 mg/g, respectively. The coexistence of anions (Cl⁻, SO₄²⁻, NO₃⁻, CO₃²⁻ and HCO₃⁻) negligibly affected the removal of phosphate due to its stronger bond on the nano-composites, while the presence of Cl⁻ and PO₄³⁻ reduced the nitrate removal attributed to the ions’ participation in the active adsorption sites on the surface of biochar–MgAl–LDH. The excellent adsorptive performance is the main synergetic influence of the MgAl–LDH incorporation into the biochar. The regeneration tests confirmed that the biochar–MgAl composite can be restored effortlessly and has the prospective to be reused after several subsequent adsorption-desorption cycles. The biochar-LDH further demonstrated capabilities for higher removal of phosphate and nitrate from real wastewater.

Due to their industrial relevance, phenolic compounds (PC) are amongst the most common organic pollutants found in many industrial wastewater effluents. The potential detrimental health and environmental impacts of PC necessitate their removal from wastewater to meet regulatory discharge standards to ensure meeting sustainable development goals. In recent decades, one of the promising, cost-effective and environmentally benign techniques for removal of PC from water streams has been adsorption onto sewage sludge (SS)-based activated carbon (SBAC). This is attributed to the excellent adsorptive characteristics of SBAC and also because the approach serves as a strategy for sustainable management of huge quantities of different types of SS that are in continual production globally. This paper reviews conversion of SS into activated carbons and their utilization for the removal of PC from water streams. Wide ranges of topics which include SBAC production processes, physicochemical characteristics of SBAC, factors affecting PC adsorption onto SBAC and their uptake mechanisms as well as the regeneration potential of spent SBAC are covered. Although chemical activation techniques produce better SBAC, yet more research work is needed to harness advances in material science to improve the functional groups and textural properties of SBAC as well as the low performance of physical activation methods. Studies focusing on PC adsorptive performance on SBAC using continuous mode (that are more relevant for industrial applications) in both single and multi-pollutant aqueous systems to cover wide range of PC are needed. Also, the potentials of different techniques for regeneration of spent SBAC used for adsorption of PC need to be assessed in relation to overall economic evaluation within realm of environmental sustainability using life cycle assessment.