In this study, date-palm biochar MgAl-augmented double-layered hydroxide (biochar–MgAl–LDH) nanocomposite was synthesized, characterized, and used for enhancing the removal of phosphate and nitrate pollutants from wastewater. The biochar–MgAl–LDH had higher selectivity and adsorption affinity towards phosphate compared to nitrate. The adsorption kinetics of both anions were better explained by the pseudo-first-order model with a faster removal rate to attain equilibrium in a shorter time, especially at lower initial phosphate-nitrate concentration. The maximum monolayer adsorption capacities of phosphate and nitrate by the non-linear Langmuir model were 177.97 mg/g and 28.06 mg/g, respectively. The coexistence of anions (Cl⁻, SO₄²⁻, NO₃⁻, CO₃²⁻ and HCO₃⁻) negligibly affected the removal of phosphate due to its stronger bond on the nano-composites, while the presence of Cl⁻ and PO₄³⁻ reduced the nitrate removal attributed to the ions’ participation in the active adsorption sites on the surface of biochar–MgAl–LDH. The excellent adsorptive performance is the main synergetic influence of the MgAl–LDH incorporation into the biochar. The regeneration tests confirmed that the biochar–MgAl composite can be restored effortlessly and has the prospective to be reused after several subsequent adsorption-desorption cycles. The biochar-LDH further demonstrated capabilities for higher removal of phosphate and nitrate from real wastewater.

This experimental work focused on the synthesis, characterization, and testing of a unique, magnetically separable, and eco-friendly adsorbent composite material for the advanced treatment and efficient removal of nitrate and phosphate pollutants from wastewater. The MgAl-augmented double-layered hydroxide (Mg-Fe/LDH) intercalated with sludge-based activated carbon (SBAC-MgFe) composites were characterized by FT-IR, XRD, BET, VSM, SEM, and TEM techniques, revealing homogeneous and efficient dispersion of MgFe/LDH within the activated carbon (AC) matrix, a highly mesoporous structure, and superparamagnetic characteristics. The initial solution pH, adsorbent dose, contact time, and temperature parameters were optimized in order to reach the best removal performance for both pollutants. The maximum adsorption capacities of phosphate and nitrate were found to be 110 and 54.5 mg/g, respectively. The competition between phosphate and coexisting ions (Cl⁻, CO₃²⁻, and SO₄²⁻) was studied and found to be remarkably lower in comparison with the nitrate adsorption. The adsorption mechanisms were elucidated by kinetic, isotherm, thermodynamic modeling, and post-adsorption characterizations of the composite. Modeling and mechanistic studies demonstrated that physisorption processes such as electrostatic attraction and ion exchange mainly governed the nitrate and phosphate adsorption. The composite indicated an outstanding regeneration performance even after five sequences of adsorption/desorption cycles. The fabricated composite with magnetically separable characteristics can be used as a promising adsorbent for the removal of phosphate and nitrate pollutants from wastewater.

Sources of contamination in a subsurface environment are petrol, diesel fuel, gasoline at oil refineries, underground storage tanks, transmission pipelines, and different industries. The permeable reactive barrier (PRB) is a promising technology to remediate groundwater in-situ. In this study, synthetic groundwater samples containing toluene are treated in three reactor columns by biological processes. PRB-1 consisted of sand and gravel as reactor media, microbial inoculum (bioaugmentation—BA), and nutrients (biostimulation—BS); PRB-2 consisted of sand and gravel as reactor media, microbial inoculum, nutrients, and 12 layers of nonwoven geotextile fabrics; and PRB-3 consisted of only sand and gravel as reactor media (natural attenuation—NA). This study was conducted to assess the impact of geotextile fabric filter, bioaugmentation, and biostimulation on toluene degradation efficiency. After 167 days of treatment, toluene biodegradation efficiencies varied between 88.2% and 93.8% for PRB 1, between 98.0% and 99.3% for PRB 2, and between 14.2% and 68.6% for PRB 3. The effluent toluene concentrations for PRB-2 were less than the guideline value (0.7 mg/L) of the World Health Organization. Reaction rate data were fitted with a first-order kinetic reaction rate model. This study showed that the toluene removal efficiency in the geotextile layered PRB combined with BA and BS process was significantly higher compared to the other processes tested. This lab-scale study introduced a new PRB configuration suitable for the remediation of sites contaminated with toluene.

International Journal of Current Microbiology and Applied Sciences ISSN:2319-7692(Print), ISSN:2319-7706(Online) is a multidisciplinary peer-reviewed journal with reputable academics and experts as members of its Editorial Board. The Current Microbiology aims to publish all the latest and outstanding research articles. Review and letters in all areas of major importance to techniques of microbiology and applied research with publishes high quality of review and research articles on novel aspects of Microbiology including Environmental, Food, Agricultural, Medical, Pharmaceutical, Veterinary, Soil, Water and Biodeterioration.