The primary means for electronic position fixing currently in use in majority of contemporary merchant ships are shipborne GPS (Global Positioning System) receivers or DGPS (Differential GPS) and IALA (International Association of Lighthouse Authorities) radio beacon receivers. More advanced GNSS (Global Navigation Satellite System) receivers able to process signals from GPS, Russian GLONASS, Chinese Beidou, European Galileo, Indian IRNSS, Japan QZSS, and satellite-based augmentation systems (SBAS), are still relatively rare in maritime domain. However, it is expected that such combined or multi-system receivers will soon become more common in maritime transport and integrated with gyro, inertial, radar, laser, and optical sensors, and they will become indispensable onboard maritime autonomous surface ships (MASS). To be prepared for a malfunction of any position sensors, their state-of-the-art integrity monitoring should be developed and standardized, taking into account the specificity of MASS and e-navigation safety. The issues of existing requirements, performance standards, and future concepts of integrity monitoring for maritime position sensors are discussed and presented in this paper.

The primary means for electronic position fixing in use in contemporary maritime transport are shipborne GPS (Global Positioning System) receivers or DGPS (Differential GPS) receivers. More advanced GNSS (Global Navigation Satellite System) or RNSS (Regional Navigation Satellite Systems) receivers are able to process combined signals from American GPS, Russian GLONASS, Chinese Beidou (BDS), European Galileo, Indian IRNSS, and Japan QZSS. Satellite-based augmentation systems (SBAS) are still not commonly used in the maritime domain, especially onboard vessels certified under international SOLAS convention. The issues and weaknesses of existing International Maritime Organization recommendations, guidelines, requirements, performance standards, and policies on GNSS shipborne sensors are discussed and presented in the paper. Many problems that have already been dealt with in other means of transportation are still to be solved in the maritime domain. The integrity monitoring is addressed as the main issue, and recommendations based on solutions implemented in aviation and the latest research are proposed. Finally, the strengths, weaknesses, opportunities, and threats awaiting maritime GNSS standardization process are outlined.

The International Maritime Organization adopted a strategy to reduce the total annual GHG emissions from international shipping by at least 50% by 2050, compared to 2008 levels. The European Union proposed an even farther reaching transformation: the European Commission adopted a set of proposals to make the EU’s transport policies fit for reducing net greenhouse gas emissions by at least 55% by 2030, compared to 1990 levels. Therefore, all industrial actions in line and consistent with these strategies are essential. One of such activities may be a gradual transition from the most common independent controls of transport ships’ thrusters, propellers, and rudders to an integrated, power optimized, 3 degrees of freedom joystick control. In this paper, the full mission bridge simulator (FMBS) research on potential energy savings and, consequently, a GHG emission reduction, while steering a RoPax twin-screw ferry equipped with bow thrusters by a joystick control, is presented. The task of navigators engaged in the research was to steer the vessel either via classic engine, rudder, and thruster levers or via a joystick while (1) following the predefined straight track, (2) rotating at the turning area, and (3), finally, crabbing (moving sideways) until stopping at the quay fenders. The conclusions are that energy savings of approximately 10% can be expected for berthing manoeuvres controlled by a joystick, compared to independent actuators’ controls. These conclusions have been drawn from a statistical analysis of the ship’s energy consumption during typical manoeuvring phases of 18 berthing operations performed in FMBS.

Some of the most important parameters of operational requirements for Global Navigation Satellite System (GNSS) are integrity, continuity, accuracy, availability and coverage. These requirements, most strictly formalized in aviation, are based on risk analysis, considering risk exposure time and critical risk exposure time. However, the GNSS user requirements in maritime domain are still not clearly set. GNSS offers worldwide coverage at a sufficient position data quality and though other means of ship's position fixing are available at sea, the use of GNSS devices is generally the most preferred method of producing valid position data. Primary means for electronic position fixing currently in use in majority of merchant ships are shipborne autonomous GPS receivers or DGPS IALA receivers. More advanced GNSS receivers able to process signals from GPS, GLONASS, Chinese Beidou, European Galileo, regional Indian IRNSS, and satellite based augmentation systems (SBAS) are still rare. But it is expected that such combined or multi-system receivers will soon become more common in maritime transport.To be prepared for a malfunction of any GNSS devices for maritime applications and e-Navigation specifically, their state of the art integrity monitoring should be developed and standardized analogously to other transport domains. The issues of existing requirements, performance standards, and future concepts of maritime GNSS integrity are discussed in this paper.

This article presents the use of a computer application codenamed “NEPTUN” to ascertain the waterway parameters of the modernised Świnoujście–Szczecin waterway. The designed program calculates the individual risks in selected sections of the fairway depending on the input data, including the parameters of the ship, available water area, and positioning methods. The collected data used for analyses in individual modules are stored in a SQL server of shared access. Vector electronic navigation charts of S-57 standard specification are used as the cartographic background. The width of the waterway is calculated by means of the method developed on the basis of the modified PIANC guidelines. The main goal of the research is to prove and demonstrate that the designed software would directly increase the navigation safety level of the Świnoujście–Szczecin fairway and indicate the optimal positioning methods in various navigation circumstances.