Periodic narrowband signals and white noise are the main interferences in online detection and localization of cable partial discharge (PD), however, existing research has always focused on the white noise suppression only, which is not in line with the actual scene. A novel de-noising method for effectively extracting random PD pulse from complex and strong interferences is proposed in this paper and applied to PD localization. Firstly, an improved adaptive variational mode decomposition (AVMD) is used to decompose periodic narrowband interference, white noise, and PD signal into different intrinsic mode. According to the characteristic that the power of intrinsic mode component of periodic narrowband interference in the discrete Fourier transformation (DFT) power spectrum is much larger than that of PD and white noise, the periodic narrowband is removed out. In order to effectively filter out white noise, a scale adaptive wavelet packet decomposition method based on correlation coefficient is proposed, which decomposes the signal into high, middle, and low-frequency components. The components with low frequency, small amplitude are removed out as the white noise interference according to the threshold method, and the residual is the de-noising PD signal. Experimental results show that the proposed method can robustly suppress the interference of periodic narrowband signal and white noise, and effectively preserve the essential characteristics of the real PD signal. In the multi-sensor travelling wave based localization system of cable PD source using time-varying kurtosis, accurate estimation of first arrival time of PD pulse can be achieved by the de-noising results.
27 October 2020 in Systems Science & Control Engineering
In top-coal caving, the window control of hydraulic support is a key issue to the perfect economic benefit. The window is driven by the electro-hydraulic control system whose command is produced by the control model and the corresponding algorithm. However, the model of the window’s control is hard to establish, and the optimal policy of window action is impossible to calculate. This paper studies the issue theoretically and, based on the 3D simulation platform, proposes a deep reinforcement learning method to regulate the window action for top-coal caving. Then, the window control of top-coal caving is considered as the Markov decision process, for which the deep Q-network method of reinforcement learning is employed to regulate the window’s action effectively. In the deep Q-network, the reward of each step is set as the control criterion of the window action, and a four-layer fully connected neural network is used to approximate the optimal Q-value to get the optimal action of the window. The 3D simulation experiments validated the effectiveness of the proposed method that the reward of top-coal caving could increase to get a better economic benefit.
29 January 2026 in Pattern Analysis and Applications