To increase the saturation magnetization (Ms) of commercially available soft magnetic Finemet alloys to the level comparable to that of Si-steel and Fe-based nanocrystalline alloys such as Nanoperm, Nanomet, the B or Si content in combination with annealing heat treatment was tailored. The ribbons of Fe95−xSi1BxNb3Cu1 (x = 11, 12, 13) and Fe87−xSixB9Nb3Cu1 (x = 6, 8, 10) were prepared by melt-spinning and annealed at different temperatures to develop nanocrystalline microstructure optimizing the soft magnetic properties. The magnetic properties of the as-spun and annealed ribbons were measured using a vibrating sample magnetometer and AC B-H loop tracer to acquire Ms of above 1.4 T in all as-spun ribbons. Among the alloys, Fe84Si1B11Nb3Cu1 annealed at 545 °C showed the highest Ms of 2 T, which exceeds that of the conventional Finemet and other Fe-based nanocrystalline alloys.
The underlying atomistic mechanism of deformation is a central problem in mechanics and materials science. Whereas deformation of crystalline metals is fundamentally understood, the understanding of deformation of amorphous metals lacks behind, particularly identifying the involved temporal and spatial scales. Here, we reveal that at small scales the size-dependent deformation behavior of amorphous metals significantly deviates from homogeneous flow, exhibiting increasing deformation rate with reducing size and gradually shifted composition. This transition suggests the deformation mechanism changes from collective atomic transport by viscous flow to individual atomic transport through interface diffusion. The critical length scale of the transition is temperature dependent, exhibiting a maximum at the glass transition. While viscous flow does not discriminate among alloy constituents, diffusion does and the constituent element with higher diffusivity deforms faster. Our findings yield insights into nano-mechanics and glass physics and may suggest alternative processing methods to epitaxially grow metallic glasses.
The understanding and quantification of ductility in crystalline metals, which has led to their widespread and effective usage as a structural material, is lacking in metallic glasses (MGs). Here, we introduce such a framework for ductility. This very practical framework is based on a MGs ability to support stable shear band growth, quantified in a stress gradient, gradSDB, which we measure and calculate for a range of MGs. Whether a MG behaves ductile or brittle in an application is determined by the comparison between gradsDB the applied stress field gradient, gradsapp. If gradsDB > gradsapp, the MG will behave brittle, if gradsDB < gradsapp, the MG will behave ductile, and gradsapp - gradsDB indicates how ductile. This framework can explain observed plastic properties of MGs and their apparent contradicting brittle and ductile characteristics. Looking forward, proposed framework provides the constitutive relation to quantitatively model their plastic behavior in any application, a requirement to use MGs as structural materials.