Maura Pavesi

Prof. Maura Pavesi

Department of Mathematical, Physical and Computer Sciences, University of Parma, 43121 Parma, Italy
orcid

Research Focus & Metrics

Academic Career Length

32Years (1995-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 June 2008 in IEEE Transactions on Device and Materials Reliability
Verified
Journal Article
Closed access
LTLorenzo Trevisanello
Lorenzo Trevisanello
Matteo MeneghiniMatteo Meneghini
Matteo Meneghini
GMGiovanna Mura
Giovanna Mura
MVMassimo Vanzi
Massimo Vanzi
MPMaura Pavesi
Maura Pavesi
EZEnrico Zanoni
Enrico Zanoni
Short-term accelerated life test activity on high brightness light emitting diodes is reported. Two families of 1-W light-emitting diodes (LEDs) from different manufacturers were submitted to distinct stress conditions: high temperature storage without bias and high dc current test. During aging, degradation mechanisms like light output decay and electrical property worsening were detected. In particular, the degradation in light efficiency induced by thermal storage was found to follow an exponential law, and the activation energy of the process was extrapolated. Aged devices exhibited a modification of the package epoxy color from white to brown. The instability of the package contributes to the overall degradation in terms of optical and spectral properties. In addition, an increase in thermal resistance was detected on one family of LEDs. This increase induces higher junction temperature levels during operative conditions. In order to correlate the degradation mechanisms and kinetics found during thermal stress, a high dc current stress was performed. Results from this comparative analysis showed similar behavior, implying that the degradation process of dc current aged devices is thermal activated due to high temperatures reached by the junction during stress. Finally, the different effects of the stress on two families of LEDs were taken into account in order to identify the impact of aging on device structure.

1 February 2018 in Materials Chemistry and Physics
Verified
Journal Article
Closed access
MPMaura Pavesi
Maura Pavesi
FFF. Fabbri
F. Fabbri
FBF. Boschi
F. Boschi
GPG. Piacentini
G. Piacentini
ABA. Baraldi
A. Baraldi
RFRoberto Fornari
Roberto Fornari

1 March 2006 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
Francesca RossiFrancesca Rossi
Francesca Rossi
MPMaura Pavesi
Maura Pavesi
Matteo MeneghiniMatteo Meneghini
Matteo Meneghini
GSGiancarlo Salviati
Giancarlo Salviati
MMManfredo Manfredi
Manfredo Manfredi
EZEnrico Zanoni
Enrico Zanoni
This work describes an experiment on degradation mechanisms of InGaN light-emitting diode (LED) test structures which do not fulfill the requirements of longlife products. We present a combined capacitance-voltage (C-V) , deep level transient spectroscopy (DLTS), electroluminescence (EL), and cathodoluminescence (CL) study of short-term instabilities of InGaN∕GaN LEDs submitted to low current aging tests at room temperature. In the early stages of the aging tests, the EL and CL characterizations showed an optical power decrease, more prominent at low current levels. The C-V profiles indicated that the stress induced an apparent charge increase, well related to the deep level changes detected by DLTS and to the optical power decrease. It is supposed that the main cause of the degradation is the generation of nonradiative paths, due to the generation/propagation of defects activated by carrier transport.

20 April 2004 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
MPMaura Pavesi
Maura Pavesi
MMM. Manfredi
M. Manfredi
GSGiancarlo Salviati
Giancarlo Salviati
NAN. Armani
N. Armani
Francesca RossiFrancesca Rossi
Francesca Rossi
IEI. Eliashevich
I. Eliashevich
The optical properties of blue InGaN-based light-emitting diodes aged at high current levels have been studied by electroluminescence and cathodoluminescence. The onset of a broad optical band peaked at about 3.1 eV in devices aged without a heat sink (junction temperature higher than 300 °C) has been correlated to an electrothermal threshold effect. The band is attributed to the dissociation of Mg–H complexes inside the p -type layers and to the consequent formation of Mg-related metastable complexes acting as acceptors. Subsequent electron-beam irradiation determines the almost complete quenching of the band.

18 August 2009 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
LMLaura Marchini
Laura Marchini
AZAndrea Zappettini
Andrea Zappettini
EGEnos Gombia
Enos Gombia
RMRoberto Mosca
Roberto Mosca
MLMarta Lanata
Marta Lanata
MPMaura Pavesi
Maura Pavesi
The quality of a CdZnTe-based X-ray detector is highly related to the interface between semiconductor and metal contact. One of the factors that increase leakage currents in CdZnTe based X-ray detectors is the presence of a conductive surface layer. In this paper the result of the passivation of the CdZnTe surface by means of an aqueous solution of NH4F/H2O2 is studied by optical ellipsometry and by the current-voltage characteristics of gold contacts deposited on the oxidized surface. Collected data show that leakage currents can be reduced and contact stability improved by the combined use of the passivation layer and a guard ring.

26 October 2009 in Applied Physics Letters
Verified
Journal Article
Closed access
Matteo MeneghiniMatteo Meneghini
Matteo Meneghini
NTNicola Trivellin
Nicola Trivellin
MPMaura Pavesi
Maura Pavesi
MMM. Manfredi
M. Manfredi
UZU. Zehnder
U. Zehnder
EZE. Zanoni
E. Zanoni
This paper reports an electro-optical analysis of the correlation between reverse-bias leakage current and luminescence in light-emitting diodes based on InGaN. The results of the analysis suggest that (i) the main mechanism responsible for leakage current conduction is tunneling, (ii) leakage current is correlated with the presence of reverse-bias luminescence, (iii) leakage current flows through preferential paths, that can be identified by means of emission microscopy, and (iv) reverse-bias luminescence could be ascribed to the recombination of electron-hole pairs in the quantum well region.