Over the last decade, gallium nitride (GaN) has emerged as an excellent material for the fabrication of power devices. Among the semiconductors for which power devices are already available in the market, GaN has the widest energy gap, the largest critical field, and the highest saturation velocity, thus representing an excellent material for the fabrication of high-speed/high-voltage components. The presence of spontaneous and piezoelectric polarization allows us to create a two-dimensional electron gas, with high mobility and large channel density, in the absence of any doping, thanks to the use of AlGaN/GaN heterostructures. This contributes to minimize resistive losses; at the same time, for GaN transistors, switching losses are very low, thanks to the small parasitic capacitances and switching charges. Device scaling and monolithic integration enable a high-frequency operation, with consequent advantages in terms of miniaturization. For high power/high-voltage operation, vertical device architectures are being proposed and investigated, and three-dimensional structures—fin-shaped, trench-structured, nanowire-based—are demonstrating great potential. Contrary to Si, GaN is a relatively young material: trapping and degradation processes must be understood and described in detail, with the aim of optimizing device stability and reliability. This Tutorial describes the physics, technology, and reliability of GaN-based power devices: in the first part of the article, starting from a discussion of the main properties of the material, the characteristics of lateral and vertical GaN transistors are discussed in detail to provide guidance in this complex and interesting field. The second part of the paper focuses on trapping and reliability aspects: the physical origin of traps in GaN and the main degradation mechanisms are discussed in detail. The wide set of referenced papers and the insight into the most relevant aspects gives the reader a comprehensive overview on the present and next-generation GaN electronics.

Failure modes and mechanisms of AlGaN/GaN high-electron-mobility transistors are reviewed. Data from three de-accelerated tests are presented, which demonstrate a close correlation between failure modes and bias point. Maximum degradation was found in "semi-on" conditions, close to the maximum of hot-electron generation which was detected with the aid of electroluminescence (EL) measurements. This suggests a contribution of hot-electron effects to device degradation, at least at moderate drain bias (V_DS30-50 V), new failure mechanisms are triggered, which induce an increase of gate leakage current. The latter is possibly related with the inverse piezoelectric effect leading to defect generation due to strain relaxation, and/or to localized permanent breakdown of the AlGaN barrier layer. Results are compared with literature data throughout the text.

We present a comprehensive review and outlook of silicon carbide (SiC) and gallium nitride (GaN) transistors available on the market for current and next-generation power electronics. Material properties and structural differences among GaN and SiC devices are first discussed. Based on the analysis of different commercially available GaN and SiC power transistors, we describe the state-of-the-art of these technologies, highlighting the preferential power conversion topologies and the key characteristics of each technological platform. Current and future fields of application for GaN and SiC devices are also reviewed. The article also reports on the main reliability aspects related to both technologies. For GaN HEMTs, threshold voltage stability, dynamic ON-resistance, and breakdown limitation are described, whereas for SiC MOSFETs the analysis also focuses on gate oxide failure and short-circuit (SC) robustness. Finally, we give an overview on the perspective of such materials in different fields of interest. An indication of possible future improvements and developments for both technologies is drawn. The requirements for hybrid converters, along with a careful optimization of performance and the use of innovative optimization tools, are underlined.

This paper critically investigates the advantages and limitations of the current-transient methods used for the study of the deep levels in GaN-based high-electron mobility transistors (HEMTs), by evaluating how the procedures adopted for measurement and data analysis can influence the results of the investigation. The article is divided in two parts within Part I. 1) We analyze how the choice of the measurement and analysis parameters (such as the voltage levels used to induce the trapping phenomena and monitor the current transients, the duration of the filling pulses, and the method used for the extrapolation of the time constants of the capture/emission processes) can influence the results of the drain current transient investigation and can provide information on the location of the trap levels responsible for current collapse. 2) We present a database of defects described in more than 60 papers on GaN technology, which can be used to extract information on the nature and origin of the trap levels responsible for current collapse in AlGaN/GaN HEMTs. Within Part II, we investigate how self-heating can modify the results of drain current transient measurements on the basis of combined experimental activity and device simulation.