Bigels, combination of organogel and hydrogel, are unique solid-like formulations with improved properties for food, cosmetics, and pharmaceutical applications. Bigel possesses merits of both phases, aqueous and oily, and displays better properties than either of the single gel. The uniqueness of bigels comes from their ability to deliver both hydrophilic and lipophilic active agents, enrichment of hydration of stratum corneum, easily spreadable, and so on. The main objective of this review article is to provide a thorough insight into the classification of bigels on the basis of synthesis method and morphology and also to demonstrate the detailed analysis of bigel formulations by considering different characterization techniques. Moreover, a special focus is given on the applications of bigels as drug delivery vehicles by transdermal route.

Ionic liquids (ILs) are liquid salts at ambient or lower temperatures and consist of ions and short-lived ion pairs. They are potential alternatives to toxic, hazardous, highly flammable, and volatile solvents for preparing solutions, dispersions, gels, composites, and polymeric melts. ILs have some very interesting and unique characteristics like good chemical and thermal stability and very low vapor pressures. They have good solvation interactions with a wide range of organic, inorganic, and polymeric compounds. They can enhance colloidal stability and the elasticity range of polymers. ILs are environmental friendly, easily recyclable, and structurally similar to the conventional solvents. For optimal performance, it is necessary to fully understand the rheological properties of ILs and their different systems for academic interests such as understanding the ability of ILs as processing aids particularly in film casting, fiber spinning and spraying, comprehension of thermodynamics and dynamics of polymer chains in ILs, analyzing the hydrodynamic volume of dispersed polymer, polymer–ILs interactions, characterizing the viscoelastic properties and nanophase–ILs interactions in nanocomposite systems, analyzing the plasticization efficiency, and the final properties of the composite system. The rheological analysis is also important for industrial purposes particularly for designing processing techniques and suitable operating conditions for IL based systems. The aim of this review is to give an overview of the rheological properties of pure ionic liquids and solutions, dispersions, gels, composites, and melts based on ionic liquids.

Rapid industrial development, vehicles, domestic activities and mishandling of garbage are the main sources of pollutants, which are destroying the atmosphere. There is a need to continuously monitor these pollutants for the safety of the environment and human beings. Conventional instruments for monitoring of toxic gases are expensive, bigger in size and time-consuming. Hybrid materials containing organic and inorganic components are considered potential candidates for diverse applications, including gas sensing. Gas sensors convert the information regarding the analyte into signals. Various polymeric/inorganic nanohybrids have been used for the sensing of toxic gases. Composites of different polymeric materials like polyaniline (PANI), poly (4-styrene sulfonate) (PSS), poly (3,4-ethylene dioxythiophene) (PEDOT), etc. with various metal/metal oxide nanoparticles have been reported as sensing materials for gas sensors because of their unique redox features, conductivity and facile operation at room temperature. Polymeric nanohybrids showed better performance because of the larger surface area of nanohybrids and the synergistic effect between polymeric and inorganic materials. This review article focuses on the recent developments of emerging polymeric/inorganic nanohybrids for sensing various toxic gases including ammonia, hydrogen, nitrogen dioxide, carbon oxides and liquefied petroleum gas. Advantages, disadvantages, operating conditions and prospects of hybrid composites have also been discussed.

The thermal kinetic modeling is crucial for development of sustainable processes where lignocellulosic fuels are a part of chemical system and their thermal degradation eventuates. In this paper, thermal decomposition of three lignocellulosic materials (bagasse, rice husk, and wheat straw) was obtained by the thermogravimetric (TG) technique and kinetics was analyzed by both model-fitting and isoconversional (model-free) methods to compare their effectiveness. Two models selected from each class include Arrhenius and Coats–Redfern (model-fitting), and Kissinger–Akahira–Sunose (KAS) and Flynn–Wall–Ozawa (FWO) (model-free). The formal model-fitting approach simulating the thermal decomposition of solids by assuming a fixed mechanism was found to be unduly facile. However, activation energy (E) values calculated from two model-fitting techniques were considerably different from each other with a percentage difference in the range of 1.36% to 7.65%. Particularly, both model-fitting methods predicted different reaction mechanism for thermal disintegration of lignocellulosic materials (two-dimensional diffusion (D2) by Arrhenius and one-dimensional diffusion (D1) by Coat–Redfern method). Conversely, the model-free routine offers a transformation of mechanism and activation energy values throughout reaction and is, therefore, more authentic to illustrate the complexity of thermal disintegration of lignocellulosic particles. Based on the model-free kinetic analysis, the lignocellulosic materials may be devised in following order of activation energy: rice husk > bagasse > wheat straw, by both KAS and FWO methods with a percentage difference no more than 0.84% for fractional conversion up to 0.7. Isoconversional approach could be recommended as more realistic and precise for modeling non-isothermal kinetics of lignocellulosic residues compared to model-fitting approach.