Produced by magnetic material dispersed in a viscous environment for the purpose of collecting and converting energy, magnetic rheological compounds greatly strengthen the development of skin-attachable and wearable electrical equipment. Given that magnetic nanomaterial anisotropy has a substantial influence on the interface polarizing of polyvinylidene fluoride (PVDF), it is critical to explore the function of magnetic polymer compounds in the triboelectric layer of triboelectric nanogenerator (TENG) output power. In this study, ferromagnetic cobalt ferrite, CoFe₂O₄ (CFO), nanoparticles, and PVDF were employed to create a triboelectric composite membrane to improve TENG energy output. The content of β phase in PVDF increased significantly from 51.2% of pure PVDF membrane to 77.7% of 5 wt% CFO nanoparticles in the PVDF matrix, which further increase the dielectric constant and negative charge of the membrane. As a consequence, the energy output of CFO/PVDF-5 TENG increased significantly with a voltage of 17.2 V, a current of 2.27 μA, and a power density of 90.3 mW/m², which is 2.4 times the performance of pure PVDF TENG. Finally, the proposal for TENG hopes that its extraordinary stability and durability will provide additional views on hydrodynamic power generation in the future.

Liquid-solid triboelectric nanogenerator (TENG) has been great attention as a promising electricity generation method for renewable energy sources and self-powered electronic devices. Thus, enhancing TENG performance is a critical issue to be concerned for both practical and industrial applications. Hence in this study, a high-output liquid-solid TENG is proposed using a polyvinylidene fluoride surface polarization enhancement (PSPE) for self-powered streamflow sensing, which shows many advantages, such as adapt to the sensor energy requirement, multiple parameters sensing at the same time, eliminate the influence of ion concentration. The TENG based on PSPE film has the maximum power density of 15.6 mW/m², which is increased by about 4.7 times compared to commercial PVDF-based TENG. This could be attributed to the increase of the dielectric constant and hydrophobic property of the PVDF film after the surface polarization enhancement process. Furthermore, the PSPE-TENG-driven sensor can simultaneously monitor both the physical and chemical parameters of the streamflow with high sensitivity and minimum error detection, which proves that the PSPE-TENG has enormous potential applications in self-powered streamflow sensing.