Curved veins and arteries make up the human cardiovascular system, and the peristalsis process underlies the blood flowing in these ducts. The blood flow in the presence of hybrid nanoparticles through a tapered complex wavy curved channel is numerically investigated. The behavior of the blood is characterized by the Casson fluid model while the physical properties of iron (Fe3O4) and copper (Cu) are used in the analysis. The fundamental laws of mass, momentum and energy give rise the system of nonlinear coupled partial differential equations which are normalized using the variables, and the resulting set of governing relations are simplified in view of a smaller Reynolds model approach. The numerical simulations are performed using the computational software Mathematica’s built-in ND scheme. It is noted that the velocity of the blood is abated by the nanoparticles’ concentration and assisted in the non-uniform channel core. Furthermore, the nanoparticles’ volume fraction and the dimensionless curvature of the channel reduce the temperature profile.
The intention of this study is to carry out a numerical investigation of time-dependent magneto-hydro-dynamics (MHD) Eyring–Powell liquid by taking a moving/static wedge with Darcy-Forchheimer relation. Thermal radiation was taken into account for upcoming solar radiation, and the idea of bioconvection is also considered for regulating the unsystematic exertion of floating nanoparticles. The novel idea of this work was to stabilized nanoparticles through the bioconvection phenomena. Brownian motion and thermophoresis effects are combined in the most current revision of the nanofluid model. Fluid viscosity and thermal conductivity that depend on temperature are predominant. The extremely nonlinear system of equations comprising partial differential equations (PDEs) with the boundary conditions are converted into ordinary differential equations (ODEs) through an appropriate suitable approach. The reformed equations are then operated numerically with the use of the well-known Lobatto IIIa formula. The variations of different variables on velocity, concentration, temperature and motile microorganism graphs are discussed as well as force friction, the Nusselt, Sherwood, and the motile density organism numbers. It is observed that Forchheimer number decline the velocity field in the case of static and moving wedge. Furthermore, the motile density profiles are deprecated by higher values of the bio convective Lewis number and Peclet number. Current results have been related to the literature indicated aforementioned and are found to be great achievement.
The depletion of natural resources and greenhouse gas emissions related to the manufacture and use of ordinary Portland cement (OPC) pose serious concerns to the environment and human life. The present research focuses on using alternative binders to replace OPC. Geopolymer might be the best option because it requires waste materials enriched in aluminosilicate for its production. The research on geopolymer concrete (GPC) is growing rapidly. However, substantial effort and expenses are required to cast specimens, cures, and tests. Applying novel techniques for the said purpose is the key requirement for rapid and cost-effective research. In this research, supervised machine learning (SML) techniques, including two individual (decision tree (DT) and gene expression programming (GEP)) and two ensembled (bagging regressor (BR) and random forest (RF)) algorithms were employed to estimate the compressive strength (CS) of GPC. The validity and comparison of all the models were made using the coefficient of determination (R2), k-fold, and statistical assessments. It was noticed that the ensembled SML techniques performed better than the individual SML techniques in forecasting the CS of GPC. However, individual SML model results were also in the reasonable range. The R2 value for BR, RF, GEP, and DT models was 0.96, 0.95, 0.93, and 0.88, respectively. The models’ lower error values such as mean absolute error (MAE) and root mean square errors (RMSE) also verified the higher precision of ensemble SML methods. The RF (MAE = 2.585 MPa, RMSE = 3.702 MPa) and BR (MAE = 2.044 MPa, RMSE = 3.180) results are better than the DT (MAE = 4.136 MPa, RMSE = 6.256 MPa) and GEP (MAE = 3.102 MPa, RMSE = 4.049 MPa). The application of SML techniques will benefit the construction sector with fast and cost-effective methods for estimating the properties of materials.
Nanomaterials have been the focus of intense study and growth in the modern era across the globe because of their outstanding qualities, which are brought about by their nanoscale size; for instance, increased adsorption and catalysis capabilities plus significant reactivity. Multiple investigations have verified the fact that nanoparticles may successfully remove a variety of pollutants from water, and, as a result, they have been utilized in the treatment of both water and wastewater. Therefore, the current research intent is to examine the nonlinear heat source/sink influence on the 3D flow of water-based silver nanoparticles incorporated in an Eyring–Powell fluid across a deformable sheet with concentration pollutants. Silver particles have been used intensively to filter water, due to their potent antibacterial properties. The leading equations involving partial differential equations are renewed into the form of ordinary ordinary differential equations through utilizing the appropriate similarity technique. Then, these converted equations are solved by utilizing an efficient solver bvp4c. Visual displays and extensive exploration of the different impacts of the non-dimensional parameters on the concentration, temperature, and velocity profiles are provided. Also, the important engineering variables including skin friction, the rate of heat, and mass transfer are examined. The findings suggest that the mass transfer rate declines due to pollutant parameters. Also, the results suggest that the friction factor is uplifted by about 15% and that the heat transfer rate, as well as the mass transfer rate, declines by about 21%, due to the presence of the nanoparticle volume fraction. We believe that these results may improve the flow rate of nanofluid systems, improve heat transfer, and reduce pollutant dispersal.
The thermal energy transfer characteristics during hybrid nanofluid migration are studied in the presence of a variable magnetic field, heat source, and radiation. The flow is governed by the conservation laws of mass, momentum, and energy, whereas it is modeled by the coupled set of nonlinear partial differential equations (PDEs). Suitable similarity transformations are employed to convert the developed set of PDEs to a nonlinear system of coupled ordinary differential equations (ODEs). The simplified system of ODEs is solved by using the well-established analytical procedure of homotopy analysis method (HAM). The effects of varying the strength of the physical parameters on the thermal energy transfer during hybrid nanofluid motion between two plates in which one of the plate is porous, rotating, as well as stretching are investigated through tables and two-dimensional graphs. The porosity is modeled through the Koo–Kleinstreuer model (KKL) correlation. The analysis reveals that the skin friction and Nusselt number augment with the increasing strength of the magnetic field and nanomaterials’ concentrations. The gradient in the fluid velocity has a dual dependence on the strength of the applied magnetic field and Grashof number and drops with the higher values of the unsteadiness parameter. The fluid velocity constricts with the enhancing magnetic field due to higher Lorentz forces, and it also drops with the increasing rotation rate. The enhancing buoyancy associated with higher Grashof number values augments the fluid velocity. The fluid’s temperature rises with the augmenting nanomaterial concentrations, Eckert number, nonsteadiness, heat source strength, and radiation parameter, while it drops with the higher Grashof number and Prandtl number. The applied technique of the HAM shows good convergence over a wide range of the convergent parameter. This work has potential applications in the development of efficient thermal energy transfer systems.
About Me
SE is a professor at Princess Nourah bint Abdulrahman University.
SE is a professor at Princess Nourah bint Abdulrahman University.