Abdullah Mossa Alzahrani

Dr. Abdullah Mossa Alzahrani

Taif University
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 April 2022 in Gels
Verified
Journal Article
Open access
PDF file
YZYong Zou
Yong Zou
CZChao Zheng
Chao Zheng
AAAbdullah Mossa Alzahrani
Abdullah Mossa Alzahrani
WAWaqas Ahmad
Waqas Ahmad
AAAyaz Ahmad
Ayaz Ahmad
SESamia Elattar
Samia Elattar
The depletion of natural resources and greenhouse gas emissions related to the manufacture and use of ordinary Portland cement (OPC) pose serious concerns to the environment and human life. The present research focuses on using alternative binders to replace OPC. Geopolymer might be the best option because it requires waste materials enriched in aluminosilicate for its production. The research on geopolymer concrete (GPC) is growing rapidly. However, substantial effort and expenses are required to cast specimens, cures, and tests. Applying novel techniques for the said purpose is the key requirement for rapid and cost-effective research. In this research, supervised machine learning (SML) techniques, including two individual (decision tree (DT) and gene expression programming (GEP)) and two ensembled (bagging regressor (BR) and random forest (RF)) algorithms were employed to estimate the compressive strength (CS) of GPC. The validity and comparison of all the models were made using the coefficient of determination (R2), k-fold, and statistical assessments. It was noticed that the ensembled SML techniques performed better than the individual SML techniques in forecasting the CS of GPC. However, individual SML model results were also in the reasonable range. The R2 value for BR, RF, GEP, and DT models was 0.96, 0.95, 0.93, and 0.88, respectively. The models’ lower error values such as mean absolute error (MAE) and root mean square errors (RMSE) also verified the higher precision of ensemble SML methods. The RF (MAE = 2.585 MPa, RMSE = 3.702 MPa) and BR (MAE = 2.044 MPa, RMSE = 3.180) results are better than the DT (MAE = 4.136 MPa, RMSE = 6.256 MPa) and GEP (MAE = 3.102 MPa, RMSE = 4.049 MPa). The application of SML techniques will benefit the construction sector with fast and cost-effective methods for estimating the properties of materials.

7 March 2022 in Buildings
Verified
Journal Article
Open access
PDF file
HAHamad Hassan Awan
Hamad Hassan Awan
Arshad HussainArshad Hussain
Arshad Hussain
Muhammad Faisal JavedMuhammad Faisal Javed
Muhammad Faisal Javed
YQYanjun Qiu
Yanjun Qiu
RARaid Alrowais
Raid Alrowais
AAAbdullah Mossa Alzahrani
Abdullah Mossa Alzahrani
The traditional method to obtain optimum bitumen content and the relevant parameters of asphalt pavements entails time-consuming, complicated and expensive laboratory procedures and requires skilled personnel. This research study uses innovative and advanced machine learning techniques, i.e., Multi-Expression Programming (MEP), to develop empirical predictive models for the Marshall parameters, i.e., Marshall Stability (MS) and Marshall Flow (MF) for Asphalt Base Course (ABC) and Asphalt Wearing Course (AWC) of flexible pavements. A comprehensive, reliable and wide range of datasets from various road projects in Pakistan were produced. The collected datasets contain 253 and 343 results for ABC and AWC, respectively. Eight input parameters were considered for modeling MS and MF. The overall performance of the developed models was assessed using various statistical measures in conjunction with external validation. The relationship between input and output parameters was determined by performing parametric analysis, and the results of trends were found to be consistent with earlier research findings stating that the developed predicted models are well trained. The results revealed that developed models are superior and efficient in terms of prediction and generalization capability for output parameters, as evident by the correlation coefficient (R) (in this case >0.90) for both ABC and AWC.

10 March 2022 in Materials
Verified
Journal Article
Open access
PDF file
AAAbdullah Mossa Alzahrani
Abdullah Mossa Alzahrani
El Saeed R. LasheenEl Saeed R. Lasheen
El Saeed R. Lasheen
MRMohammed Rashwan
Mohammed Rashwan
The aim of the present study is to link the thermal expansion, spectral reflectance, and physico-mechanical aspects of different types of commercial granitic rocks with their mineralogical and chemical composition. The granitic rock types were characterized using several analyses, including petrography, chemical, mineralogical, and thermo-gravimetrical analysis using XRF, XRD, and TG/DTG/DSC techniques. The rock types were subjected to several performance tests, such as tests of their thermal expansion, spectral reflectance, and physico-mechanical properties. The results revealed that quartz, albite, and potash feldspar with minor amounts of mica (biotite/muscovite/annite) are the main mineralogical constitutes, in addition to some alteration minerals, such as kaolinite, saussorite, and prehnite. The studied granitic rocks were classified as monzogranite/syenogranite of high K-calc-alkaline and peraluminous characters and are related to late- to post-collisional settings. The thermogravimetrical analysis revealed that the overall mass loss over the whole temperature range up to 978 °C did not exceed 3% of the initial weight for all studied rocks. The results of thermal expansion revealed that the maximum change in linear thermal expansion for all rock types did not exceed 0.015% of their initial lengths at an unusual air temperature of 50 °C. The spectral analysis revealed that iron and hydroxyl ions are the main spectral absorption features that appeared in the VIS-NIR and SWIR regions, in addition to the appearance of the common and distinctive absorption peaks of the main mineral composition. Furthermore, the spectral reflectance demonstrated that the granitic rock types of low iron oxide content achieved a high reflectivity percent in the VIS-NIR and SWIR spectral regions compared with those of high iron content. As a general trend, the granitic rock types of high iron content and/or lower quartz content exhibited a high performance regarding their physical and mechanical properties, such as water absorption, apparent porosity, bulk density, compressive strength, and abrasion resistance. The results of water absorption, density, strength, and abrasion resistance of the studied granitic rocks are in the range of 0.14–0.31%, 2582–2644 kg/m3, 77.85–222.75 MPa, and 26.27–55.91 Ha, respectively, conforming to the requirements of ornamental stones according to the ASTM standard.

29 July 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Mohamed KamarMohamed Kamar
Mohamed Kamar
ISIbrahim A. Salem
Ibrahim A. Salem
IEIbrahim E. El-Aassy
Ibrahim E. El-Aassy
AEAbdu A. El-Sayed
Abdu A. El-Sayed
Hesham M.H. ZakalyHesham M.H. Zakaly
Hesham M.H. Zakaly
El Saeed R. LasheenEl Saeed R. Lasheen
El Saeed R. Lasheen
High-level natural radioactivity, geochemical, geological, and radiological hazard assessment of the poorly investigated Wadi Gebeiy Dokhan volcanics rocks are discussed. Wadi Gebeiy Dokhan volcanics are located in Southwestern Sinai, Egypt, covering an area of ~1.3 km2. Dokhan volcanics rocks are represented by porphyritic dacite. Geochemically, they have medium-k characters and originate from calc-alkaline magma within a volcanics arc environment. Along the fault plane striking NNE-SSW, and at its intersection with the NW-SE fault plane, altered Dokhan volcanics occur with high radioactive anomalies. Radiological parameters (absorbed dose rate, radium equivalent, activity annual effective dose, external and internal hazard indices) are used to evaluate their suitability as an ornamental stone. Except for the absorbed dose rate, all the radiological hazard indices show that unaltered Dokhan volcanics can be used as an ornamental stone. Controversially, the applied radiological indices reveal that altered Dokhan volcanics have a higher content than the recommended values of UNSCEAR, reflecting their risk on human organs.

14 September 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
MEMohamed Ibrahim Elhadary
Mohamed Ibrahim Elhadary
AAAbdullah Mossa Alzahrani
Abdullah Mossa Alzahrani
RAReda M. H. Aly
Reda M. H. Aly
Bahaa ElboshyBahaa Elboshy
Bahaa Elboshy
The appropriate ventilation for factory spaces with regard to volume flow rate and air velocity inside the factory is one of the most important factors in the improvement of the thermal comfort of workers and in the reduction of the percentage of pollution they are exposed to, which in turn helps to improve the work environment and increase productivity. It also could improve the performance of machines. Hence, overheating can cause various problems and malfunctions. In this study, three types of mechanical ventilation systems are compared: the wall fan extract ventilation system, the roof fan extract ventilation system, and the spot cooling system. The Ansys software has been used to conduct the computational fluid dynamics (CFD) simulations for the different cases and the ventilation effectiveness factor (VEF) has been used to compare the performances of the three systems. The ventilation factor notably relies on the temperature distribution produced through the modeling and the results show that the most optimal system that can be used for similar factory spaces is the forced ventilation system. Finally, it is also the best in terms of energy consumption, despite the increase in the initial cost of its installation.

1 January 2022 in Rudarsko-geološko-naftni zbornik
Verified
Journal Article
Open access
PDF file
AAAbdullah Mossa Alzahrani
Abdullah Mossa Alzahrani
Municipal solid waste (MSW) management is a critical issue in the Kingdom of Saudi Arabia (KSA). Management of solid waste in crowded conditions, especially in main cities such as the Al-Taif Province. This paper deals with that case study and focuse...