The present work aims to define the mechanical behavior of a new composite material for the preservation and enhancement of the vast historical and architectural heritage particularly vulnerable to environmental and seismic actions. The new composite represents a novelty in the landscape of the fibrous mortars and consists of natural hydraulic lime (NHL)-based mortar, strengthened by Sisal short fibers randomly oriented in the mortar matrix. The developed mortar ensures the chemical-physical compatibility with the original features of the historical masonry structures (especially in stone and clay) aiming to pursue the effectiveness and durability of the intervention. The use of vegetal fibers (i.e., the Sisal one) is an exciting challenge for the construction industry considering that they require a lower level of industrialization for their processing, and therefore, their costs are considerably lower, as compared to the most common synthetic/metal fibers. Samples of Sisal-composite are tested in three-point bending, aiming to estimate both their bending stress and fracture energy. Tensile and compressive tests were also performed on the composite samples, while water retention and slump test were performed on the fresh mix. At last, the tensile tests on the Sisal strand were performed to evaluate the tensile stress of both strand and wire. An original mechanical interpretation is proposed to explain two interesting phenomena that arose from the analysis of experimental data. The comparison among the performances of unreinforced and reinforced mortar suggests that the use of short fibers is recommendable as coating in the retrofitting interventions alternatively to the long uni or bi-directional fiber strands adopted in the classic fibrous reinforcement (i.e., FRCM). The proposed composite also ensures mix-independent great workability, excellent ductility, and strength, and it can be considered a promising alternative to the classic fiber-reinforcing systems. As final remarks, the use of fiber F1 (length of 24 mm) with respect to fiber F2 (length of 13 mm) is more recommendable in the retrofitting interventions of historical buildings, ensuring higher strength and/or ductility for the composite.

Recent seismic events prompted research to develop innovative materials for strengthening and repair of both modern and historic masonry constructions (buildings, bridges, towers) and structural components (walls, arches and vaults, pillars, and columns). Strengthening solutions based on composite materials, such as the Fiber Reinforced Polymers (FRP) or the Fiber Reinforced Cementitious Matrix (FRCM), have been increasingly considered in the last two decades. Despite reinforcement made of short-fibers being a topic that has been studied for several years from different researchers, it is not yet fully considered for the restoration of the masonry construction. This work aims to experimentally investigate the enhancement of the mechanical properties of lime-based mortar reinforced by introducing short glass fibers in the mortar matrix with several contents and aspect ratios. Beams with dimensions of 160 mm × 40 mm × 40 mm with a central notch were tested in three-point bending configuration aiming to evaluate both the flexural strength and energy fracture of the composite material. Then, the end pieces of the broken beams were tested in Brazilian and compressive tests. All the tests were performed by a hydraulic displacement-controlled testing machine. Results highlight that the new composite material ensures excellent ductility capacity and it can be considered a promising alternative to the classic fiber-reinforcing systems.

In this study, support vector machine (SVM) and Gaussian process regression (GPR) models were employed to analyse different rubbercrete compressive strength data collected from the literature. The compressive strength data at 28 days ranged from 4 to 65 MPa in reference to rubbercrete mixtures, where the fine aggregates (sand fraction) were substituted with rubber aggregates in a range from 0% to 100% of the volume. It was observed that the GPR model yielded good results compared to the SVM model in rubbercrete strength prediction. Two strength reduction factor (SRF) equations were developed based on the GPR model results. These SRF equations can be used to estimate the compressive strength reduction in rubbercrete mixtures; the equations are provided. A sensitivity analysis was also performed to evaluate the influence of the w/c ratio on the compressive strength of the rubbercrete mixtures.

Rubble stone masonry walls are widely diffused in most of the cultural and architectural heritage of historical cities. The mechanical response of such material is rather complicated to predict due to its composite nature. Vertical compression tests, diagonal compression tests, and shear-compression tests are usually adopted to investigate experimentally the mechanical properties of stone masonries. However, further tests are needed for the safety assessment of these ancient structures. Since the relation between normal and shear stresses plays a major role in the shear behavior of masonry joints, governing the failure mode, a triplet test configuration is herein investigated. First, the experimental tests carried out at the laboratory of the University of L’Aquila on stone masonry specimens are presented. Then, the triplet test is simulated by using the total strain crack model, which reflects all the ultimate states of quasi-brittle material such as cracking, crushing, and shear failure. The goal of the numerical investigation is to evaluate the shear mechanical parameters of the masonry sample, including strength, dilatancy, normal, and shear deformations. Furthermore, the effect of (i) confinement pressure and (ii) bond behavior at the sample-plate interfaces are investigated, showing that they can strongly influence the mechanical response of the walls.