The World Health Organization (WHO) reported that there are 285 million visuallyimpaired people worldwide. Among these individuals, there are 39 million who are totally blind. There have been several systems designed to support visually-impaired people and to improve the quality of their lives. Unfortunately, most of these systems are limited in their capabilities. In this paper, we present a comparative survey of the wearable and portable assistive devices for visuallyimpaired people in order to show the progress in assistive technology for this group of people. Thus, the contribution of this literature survey is to discuss in detail the most significant devices that are presented in the literature to assist this population and highlight the improvements, advantages, disadvantages, and accuracy. Our aim is to address and present most of the issues of these systems to pave the way for other researchers to design devices that ensure safety and independent mobility to visually-impaired people.
The world has approximately 253 million visually impaired (VI) people according to a report by the World Health Organization (WHO) in 2014. Thirty-six million people are estimated to be blind. According to WHO, 217 million people are estimated to have moderate to severe visual impairment. An important factor that motivated this research is the fact that 90% of VI people live in developing countries. Several systems were designed to improve the quality of the life of VI people and support their mobility. Unfortunately, none of these systems are considered to be a complete solution for VI people and these systems are very expensive. We present in this work an intelligent framework for supporting VI people. The proposed work integrates sensor-based and computer vision-based techniques to provide an accurate and economical solution. These techniques allow us to detect multiple objects and enhance the accuracy of the collision avoidance system. In addition, we introduce a novel obstacle avoidance algorithm based on the image depth and fuzzy logic. By using the fuzzy logic, we were able to provide precise information to help the VI user in avoiding front obstacles. The system has been deployed and tested in real-time scenarios. An accuracy of 98% was obtained for detecting objects and 100% accuracy in avoiding the detected objects.
Simulating blockchain technology within the IoT has never been as important. Along with this comes the need to find suitable blockchain simulators capable of simulating blockchain networks within an IoT environment. Despite there being a wide variety of blockchain simulators, not all are capable of simulating within an IoT environment and not all are suitable for every IoT environment. This article will review previously published works and present a list of suitable blockchain simulators as well as a few untested simulators that have the potential to simulate blockchain networks within an IoT environment. A total of 18 blockchain simulators are presented and discussed in this paper. In addition, a comprehensive list of the advantages and limitations of each simulator is presented to demonstrate the best situation in which simulators should be used. Finally, recommendations are made on when each simulator should be used and in what situation it should be avoided.
Advanced as they are, DL models in cyber-physical systems remain vulnerable to attacks like the Fast Gradient Sign Method, DeepFool, and Jacobian-Based Saliency Map Attacks, rendering system trustworthiness impeccable in applications with high stakes like power systems. In power grids, DL models such as Convolutional Neural Networks (CNNs) and Long Short-Term Memory (LSTM) networks are commonly utilized for tasks like state estimation, load forecasting, and fault detection, depending on their ability to learn complex, non-linear patterns in high-dimensional data such as voltage, current, and frequency measurements. Nevertheless, these models are susceptible to adversarial attacks, which could lead to inaccurate predictions and system failure. In this paper, the impact of these attacks on DL models is analyzed by employing the use of defensive countermeasures such as Adversarial Training, Gaussian Augmentation, and Feature Squeezing, to investigate vulnerabilities in industrial control systems with potentially disastrous real-world impacts. Emphasizing the inherent requirement of robust defense, this initiative lays the groundwork for follow-on initiatives to incorporate security and resilience into ML and DL algorithms and ensure mission-critical AI system dependability.
18 March 2020 in IEEE Transactions on Industry Applications
This paper presents a novel real-time hardware-in-loop (HIL)-based model for synchronized phasor measurement unit (PMU) which incorporates an adaptive observer to estimate the phasor quantities of the actual hardware-based PMU model. The proposed model is feasible for a wide area measurement system (WAMS) in modern power grids. The performance of the proposed model is compared to the conventional algorithms of the performance (P)-class and measurement (M)-class PMU models in terms of total vector error (TVE) and rate of change of frequency (ROCOF) under different scenarios (frequency ramp, unbalance with interharmonics, and out of bound offnominal frequency). The main advantages of the proposed model compared to existing models are: (1) combining the advantages of both P & M classes in terms of achieving required standard steady-state performance (IEEE C37.118-2005) while capturing the dynamic system performance, (2) improving the redundancy due to PMU loss, (3) allowing faster implementations and advanced visualization tools, and (4) enhancing WAMS accuracy performance. Despite the advantageous introduced utilizing the proposed model, there is still a tradeoff gap between the investment cost of the installed hardware-based PMUs and system redundancy. Moreover, a laboratory-scale 6-bus setup is built and tested to demonstrate the practical validity of the proposed model.
This paper aims to design and implement a robust wireless charging system that utilizes affordable materials and the principle of piezoelectricity to generate clean energy to allow the user to store the energy for later use. A wireless charging system that utilizes the piezoelectricity generated as a power source and integrated with Qi-standard wireless transmission would substantially affect the environment and the users. The approach consists of a full-wave-rectified piezoelectric generation, battery storage, Qi-standard wireless transmission, and Bluetooth Low Energy (BLE) as the controller and application monitor. Three main functions are involved in the design of the proposed system: power generation, power storage, and power transmission. A client application is conceived to monitor the transmission and receipt of data. The piezoelectric elements generate the AC electricity from the mechanical movements, which converts the electricity to DC using the full-wave bridge rectifiers. The sensor transmits the data to the application via BLE protocols. The user receives continuous updates regarding the storage level, paired devices, and remaining time for a complete charge. A Qi-standard wireless transmitter transfers the stored electricity to charge the respective devices. The output generates pulses to 60 voltage on each compression of a transducer. The design is based on multiple parallel configurations to solve the issue of charging up to the triggering value VH = 5.2 V when tested with a single piezoelectric transducer. AA-type battery cells are charged in parallel in a series configuration. The system is tested for a number of scenarios. In addition, we simulate the design for 11.11 h for approximately 70,000 joules of input. The system can charge from 5% to 100% and draw from 98%. Using four piezos in the designed module results in an average output voltage of 1.16 V. Increasing the number of piezos results in 17.2 W of power. The system is able to wirelessly transmit and store power with a stable power status after less than 0.01 s.