The conventional geothermal power plants use the reinjection wells mostly to avoid the depletion of the geothermal reservoir gathering in the underground of the produced brine. Nevertheless, reinjection operations entail high economic costs and some risks. An alternative is the extraction of the heat without geothermal fluids production, the wellbore heat exchanger. The goal of the present paper is the analysis of the power production of the wellbore heat exchanger (WBHX) in time and the comparison between two different conversion systems of the thermal energy into electrical: the organic ranking cycle (ORC) plant and the Stirling motor. The selected case study is the oil field of Villafortuna Trecate, a medium enthalpy geothermal resource. The simulation results show a substantial decrease of the wellhead temperature in the first 6 months. After 1 year, the thermal power extracted with the WBHX is greater than 1.3 MW. The design parameters are 20 m3/h for the flow rate, outlet temperature 100.38 °C and the inlet temperature is 40 °C. The R-C318 has been selected as working fluid in the ORC plant: the net electrical power is 121 kW. The air is the working fluid in the Stirling motor: the evaluated net electrical power is 152 kW. The Stirling engine has an efficiency greater than 41 % compared to a system ORC.

The decarbonisation of the energy sector is probably one of the main worldwide challenges of the future. Global changes urge a radical transformation and improvement of the energy-producing systems to meet the decarbonisation targets and a reduction of greenhouse gas emissions. The hydrocarbon industry also contributes to this transition path. In a mature stage of oil and gas fields, the production of hydrocarbons is associated with formation waters. The volume of produced water increases with the maturity of the assets and the geothermal repurposing of depleted oil and gas wells could be an alternative to the mining closure. In the described transition scenario, the geothermal energy seems very promising because of its wide range of applications depending on the temperature of extracted fluids. This flexibility enables us to propose projects inspired by a circular economic vision considering the integration in the territory and social acceptance issues. In Italy, since 1985, 7246 wells have been drilled for hydrocarbon, of which 898 are located onshore with a productive or potentially productive operational status. This paper presents a preliminary investigation of oil and gas fields located onshore in Italian territory based on the available information on temperature distribution at different depths. Then, taking into account the local energy demand, existing infrastructure, and land use of the territory, a conversion strategy for the producing wells is proposed for three case studies.

The geothermal industry is fronted by a fundamental decade to grow and become an energy supplier in transitioning to a sustainable energy system. The introduction of Closed-Loop Geothermal energy systems (CLG) can overcome the negative social response and increase the attractiveness of geothermal developments. The present work aims to investigate and compare the performance of CLG systems. For the comparison, the case study of Campi Flegrei was chosen. The maximum depth was fixed at 2000 m, and the two configurations were set up to analyse the performance and evaluate the best operational configuration. Both CLG configurations showed decay in the output temperature of the working fluid during the production time. For a U-shaped design, it is possible to find a working condition that allows constant thermal power over time. The DBHE specific power was always more significant, up to 350 kW/m, compared to the U-shaped, which attained a maximum of 300 W/m (15%). The comparison with Beckers et al. analysis highlights the similarity of our results with their base case. The consideration of the CLG system’s length is related to the heat exchange and investment costs. For longer exchangers, there are higher investments and lower specific power.

Climate change and the energy crisis forced industrialized countries to contain CO₂ emissions and use indigenous renewable energy sources. Geothermal energy undoubtedly has great potential, particularly thermal energy, given that 48% of the final energy consumption in the EU20 countries in 2021 was related to heating and cooling systems. The present study verifies and compares the feasibility of realizing district heating systems in two different contexts: (i) depleted hydrocarbon fields with the repurposing of existing hydrocarbon wells into geothermal wells and (ii) areas with documented geothermal resources. The two selected case studies are located, respectively, near Romentino (Northern Italy, province of Novara) and Tuscania (Central Italy, province of Viterbo). Following an assessment of the geothermal resources in the two selected case studies, specific methodological tools have been developed to evaluate the energy demand in the municipalities and determine the projects’ economics. Both case studies show positive economic indices assuming heat tariffs aligned with the values recorded in the 2020–2021 period. However, our results show how reusing hydrocarbon wells in geothermal wells constitutes an excellent opportunity to access geothermal resources, significantly reducing the necessary investment and the mining risk and strongly improving the economics of the projects.