The main aim of this study is to estimate the kinetic and thermodynamic parameters of thermal decomposition of starches by the Coats–Redfern method. This procedure is a commonly used thermogravimetric analysis/difference thermal gravimetry/differental thermal analysis (TG/DTG-DTA) kinetic method for single rate form. The study also shows a proposed method for reactive hydroxyl groups content on the starch surface determination, and values were in range of 960.21–1078.76 mg OH per 1 g of starch. Thermal processing revealed the thermophysical properties of biomass for the kinetics of decomposition estimation. Activation energies reached the values in range of approximately 66.5–167 kJ·mol⁻¹. This research also enables the determination of the temperature conditions required for becoming the desired form of material. Therefore, it is necessary to achieve the requested compact porous structure in an activation process, because in the native state, the polymer exhibits limited applications as a result of thermal decomposition, low shear stress, retrogradation, and syneresis, hence the low solubility in organic solvents. Thermodynamic parameters and reactive hydroxyl groups in this article review are innovative and have not yet been found in the literature.

The aspect of safety in electronic devices has turned out to be a huge challenge for the world of science. Thus far, satisfactory power and energy densities, efficiency, and cell capacities have been achieved. Unfortunately, the explosiveness and thermal runaway of the cells prevents them from being used in demanding applications such as electric cars at higher temperatures. The main aim of this review is to highlight different electrolytes used in lithium-ion cells as well as the flammability aspect. In the paper, the authors present liquid inorganic electrolytes, composite polymer–ceramic electrolytes, ionic liquids (IL), polymeric ionic liquids, polymer electrolytes (solvent-free polymer electrolytes (SPEs), gel polymer electrolytes (GPEs), and composite polymer electrolytes (CPEs)), and different flame retardants used to prevent the thermal runaway and combustion of lithium-ion batteries (LIBs). Additionally, various flame tests used for electrolytes in LIBs have been adopted. Aside from a detailed description of the electrolytes consumed in LIBs. Last section in this work discusses hydrogen as a source of fuel cell operation and its practical application as a global trend that supports green chemistry.

Over the past decades, the application of new hybrid materials in energy storage systems has seen significant development. The efforts have been made to improve electrochemical performance, cyclic stability, and cell life. To achieve this, attempts have been made to modify existing electrode materials. This was achieved by using nano-scale materials. A reduction of size enabled an obtainment of changes of conductivity, efficient energy storage and/or conversion (better kinetics), emergence of superparamagnetism, and the enhancement of optical properties, resulting in better electrochemical performance. The design of hybrid heterostructures enabled taking full advantage of each component, synergistic effect, and interaction between components, resulting in better cycle stability and conductivity. Nowadays, nanocomposite has ended up one of the foremost prevalent materials with potential applications in batteries, flexible cells, fuel cells, photovoltaic cells, and photocatalysis. The main goal of this review is to highlight a new progress of different hybrid materials, nanocomposites (also polymeric) used in lithium-ion (LIBs) and sodium-ion (NIBs) cells, solar cells, supercapacitors, and fuel cells and their electrochemical performance.

TiO₂-MoO₃ composite systems were successfully prepared using a template-assisted microwave method at molar ratios TiO₂:MoO₃ = 8:2, 5:5 and 2:8. The synthesized material systems were comprehensively characterized, in terms of their crystalline structure (XRD and Raman spectroscopy), morphology (SEM, TEM and HRTEM analysis) and parameters of the porous structure (low-temperature N₂ sorption). The materials exhibited highly crystalline phases: anatase and hexagonal molybdenum trioxide. Moreover, TEM analysis revealed hexagonal prism particles of MoO₃ and nanocrystalline particles of TiO₂. The proposed template-assisted microwave synthesis enabled the incorporation of TiO₂ particles on the surface of hexagonal particles of MoO₃, which resulted in a stable junction between titania and molybdenum trioxide. The values of BET surface area were 57, 29 and 11 m²/g for samples obtained at molar ratios TiO₂:MoO₃ = 8:2, 5:5 and 2:8 respectively. In electrochemical applications, titanium dioxide plays a crucial role as an intercalation intensifier, in which MoO₃ is responsible for current conduction. Taking account of the potential electrochemical applications, the best system was obtained at the molar ratio TiO₂:MoO₃ = 5:5. The anode could maintain a capacity of 400 mAh/g at current densities in the range 100–1000 mA/g at potential values ranging from 1.00 to 3.30 V vs. Li/Li⁺. X-ray photoelectron spectroscopy (XPS) confirmed the effective intercalation of lithium ions into the TiO₂-MoO₃ composite materials.

The main purpose of this work is to illustrate the flame retardant properties of corn starch that is used as an additive to the classic electrolytes in lithium-ion cells. The advantages of using natural biomass include the increased biodegradability of the cell, compliance with the slogan of green chemistry, as well as the widespread availability and easy isolation of this ingredient. Due to the non-Newtonian properties of starch, it increases work safety and prevents the occurrence of thermal runaway as a shear-thinning fluid in the event of a collision. Thus, its use may, in the future, prevent explosions that affect electric cars with lithium-ion batteries without significantly degrading the electrochemical parameters of the cell. In the manuscript, the viscosity test, flash point measurements, the SET (self-extinguishing time) test and conductivity measurements were performed, in addition to the determination of electrochemical impedance spectroscopy (EIS) for the anode system. Additionally, the kinetic and thermodynamic parameters, for both flow and conductivity, were determined for a deeper analysis; this constitutes the scientific novelty of this study. Through mathematical analysis, it was shown that the optimal amount of added starch is 5%. This is supported primarily by the determined kinetic and thermodynamic parameters and the fact that the system did not gel during heating.

This manuscript shows the use of natural polysaccharides such as starch and cellulose as a carbon source for fuel cells. To achieve this, two innovative methods of obtaining hydrogen have been shown: by adsorption and by enzyme. The carbonization path of the material results in excellent sorption properties and allows gas with high efficiency to be obtained. The enzymatic method for the degradation of the compound is more expensive because specific enzymes (such as laccase, tyrosinase) must be used, but it allows greater control of the properties of the obtained material. A scientific novelty is the use of natural raw materials, the use of which increases the biodegradability of the electrochemical system and also reduces the cost of raw materials and increases the range of their acquisition. Energy should be generated where it is used. Another goal is decentralization, and thanks to the proposed solutions, hydrogen cells represent an innovative alternative to today’s energy giants—also for independent power supply to households. The proposed harvesting paths are intended to drive rail vehicles in order to reduce emissions and secondary pollution of the environment. The goals of both methods were easy recycling, high efficiency, increased environmental friendliness, low cost and a short hydrogen production path.