Due to the large number of sample plots and variables to be measured, inexperienced surveyors are expected to take field measurements in National Forest Inventories (NFIs). However, very little information exists on the data quality that can be expected from inexperienced surveyors given different levels of training. We evaluated the quality of data produced by inexperienced undergraduate students when measuring the most fundamental variables: tree diameter using a diameter tape and height using an ultrasonic Vertex III hypsometer. We found that a single training session on how to use the instruments and how to reduce measurement errors was insufficient for inexperienced surveyors to achieve measurement quality objectives (MQOs). Providing a single feedback of control team measurements significantly improved data quality, except in the measurements of tree height of broad-leaved trees, but additional feedback did not contribute to further improvement. We propose that field training courses for inexperienced surveyors incorporate a one-day exercise with feedback instruction.

The main objective of this study was to evaluate the effectiveness of adding feature variables, such as forest type information and topographic- and climatic-environmental factors to satellite image data, on the accuracy of stand volume estimates made with the k-nearest neighbor (k-NN) technique in southwestern Japan. Data from the Forest Resources Monitoring Survey—a national plot sampling survey in Japan—was used as in situ data in this study. The estimates obtained from three Landsat Enhanced Thematic Mapper Plus (ETM+) datasets acquired in different seasons with various combinations of additional feature variables were compared. The results showed that although the addition of environmental factors to satellite image data did not always help improve estimation accuracy, the use of summer rainfall (SRF) data had a consistent positive effect on accuracy improvement. Therefore, SRF may be a useful feature variable to consider in stand volume estimation in this study area. Moreover, the use of forest type information is very effective at reducing k-NN estimation errors when using an optimum combination of satellite image data and environmental factors. All of the results indicated that the k-NN technique combined with appropriate feature variables is applicable to nationwide stand volume estimation in Japan.

Understanding the tree growth process is essential for sustainable forest management. Future yields are affected by various forest management regimes such as thinning; therefore, accurate predictions of tree growth are needed under various thinning intensities. This study compared the accuracy of individual-level distance-independent diameter growth models constructed for different thinning intensities (thinning intensity-dependent multiple models: TDM model) against the model designed to include all thinning intensities (thinning intensity-independent single model: TIS model) to understand how model accuracy is affected by thinning intensity. We used long-term permanent plot data of Japanese cedar (Cryptomeria japonica) stands in Japan, which was gathered from four plots where thinning was conducted at different thinning intensities: (1) intensive (41% and 38% of trees removed at 25 and 37 years old, respectively), (2) moderate (38% and 34%), (3) light (32% and 34%), and (4) no thinning. First, we specified high interpretability distance-independent competition indices, and we compared the model accuracy both in TDM and TIS models. The results show that the relative spacing index was the best competition index both in TDM and TIS models across all thinning intensities, and the differences in the RMSE (Root mean square error) and rRMSE (relative RMSE) in both TDM and TIS models were 0.001–0.01 cm and 0.2–2%, respectively. In the TIS model, rRMSE varied with thinning intensity; the rRMSE was the lowest for moderate thinning intensity (45.8%) and the highest for no thinning (59.4%). In addition, bias values were negative for the TIS model for all thinning intensities. These results suggest that the TIS model could express diameter growth regardless of thinning intensities. However, the rRMSE had varied with thinning intensity and bias had negative values in the TIS model. Therefore, more model improvements are required for accurate predictions of long-term growth of actual Japanese cedar stands.