We investigated the capabilities of a canopy height model (CHM) derived from aerial photographs using the Structure from Motion (SfM) approach to estimate aboveground biomass (AGB) in a tropical forest. Aerial photographs and airborne Light Detection and Ranging (LiDAR) data were simultaneously acquired under leaf-on canopy conditions. A 3D point cloud was generated from aerial photographs using the SfM approach and converted to a digital surface model (DSM_P). We also created a DSM from airborne LiDAR data (DSM_L). From each of DSM_P and DSM_L, we constructed digital terrain models (DTM), which are DTM_P and DTM_L, respectively. We created four CHMs, which were calculated from (1) DSM_P and DTM_P (CHM_PP); (2) DSM_P and DTM_L (CHM_PL); (3) DSM_L and DTM_P (CHM_LP); and (4) DSM_L and DTM_L (CHM_LL). Then, we estimated AGB using these CHMs. The model using CHM_LL yielded the highest accuracy in four CHMs (R² = 0.94) and was comparable to the model using CHM_PL (R² = 0.93). The model using CHM_PP yielded the lowest accuracy (R² = 0.79). In conclusion, AGB can be estimated from CHM derived from aerial photographs using the SfM approach in the tropics. However, to accurately estimate AGB, we need a more accurate DTM than the DTM derived from aerial photographs using the SfM approach.

Developing accurate methods for estimating forest structures is essential for efficient forest management. The high spatial and temporal resolution data acquired by CubeSat satellites have desirable characteristics for mapping large-scale forest structural attributes. However, most studies have used a median composite or single image for analyses. The multi-temporal use of CubeSat data may improve prediction accuracy. This study evaluates the capabilities of PlanetScope CubeSat data to estimate canopy height derived from airborne Light Detection and Ranging (LiDAR) by comparing estimates using Sentinel-2 and Landsat 8 data. Random forest (RF) models using a single composite, multi-seasonal composites, and time-series data were investigated at different spatial resolutions of 3, 10, 20, and 30 m. The highest prediction accuracy was obtained by the PlanetScope multi-seasonal composites at 3 m (relative root mean squared error: 51.3%) and Sentinel-2 multi-seasonal composites at the other spatial resolutions (40.5%, 35.2%, and 34.2% for 10, 20, and 30 m, respectively). The results show that RF models using multi-seasonal composites are 1.4% more accurate than those using harmonic metrics from time-series data in the median. PlanetScope is recommended for canopy height mapping at finer spatial resolutions. However, the unique characteristics of PlanetScope data in a spatial and temporal context should be further investigated for operational forest monitoring.

We developed an empirical model to estimate aboveground carbon density with variables derived from airborne Light Detection and Ranging (LiDAR) in tropical seasonal forests in Cambodia, and assessed the effects of LiDAR pulse density on the accurate estimation of aboveground carbon density. First, we tested the applicability of variables used for estimating aboveground carbon density with the original LiDAR pulse density data (26 pulse m⁻²). Aboveground carbon density was regressed against variables derived from airborne LiDAR. Three individual height variable models were developed along with a canopy density model, and three other models combined canopy height and canopy density variables. The influence of forest type on model accuracy was also assessed. Next, the relationship between pulse density and estimation accuracy was investigated using the best regression model. The accuracy of the models were compared based on seven LiDAR point densities consisting of 0.25, 1, 2, 3, 4, 5 and 10 pulse m⁻². The best model was obtained using the single mean canopy height (MCH) model (R ² = 0.92) with the original pulse density data. The relationship between MCH and aboveground carbon density was found to be consistent under different forest types. The differences between predicted and measured residual mean of squares of deviations were less than 1.5 Mg C ha⁻¹ between each pulse density. We concluded that aboveground carbon density can be estimated using MCH derived from airborne LiDAR in tropical seasonal forests in Cambodia even with a low pulse density of 0.25 pulse m⁻² without stratifying the study area based on forest type.

The main objective of this study was to evaluate the effectiveness of adding feature variables, such as forest type information and topographic- and climatic-environmental factors to satellite image data, on the accuracy of stand volume estimates made with the k-nearest neighbor (k-NN) technique in southwestern Japan. Data from the Forest Resources Monitoring Survey—a national plot sampling survey in Japan—was used as in situ data in this study. The estimates obtained from three Landsat Enhanced Thematic Mapper Plus (ETM+) datasets acquired in different seasons with various combinations of additional feature variables were compared. The results showed that although the addition of environmental factors to satellite image data did not always help improve estimation accuracy, the use of summer rainfall (SRF) data had a consistent positive effect on accuracy improvement. Therefore, SRF may be a useful feature variable to consider in stand volume estimation in this study area. Moreover, the use of forest type information is very effective at reducing k-NN estimation errors when using an optimum combination of satellite image data and environmental factors. All of the results indicated that the k-NN technique combined with appropriate feature variables is applicable to nationwide stand volume estimation in Japan.