In recent years, the use of oil palm wastes has been an interesting approach for the development of sustainable polymer matrix composites. Nevertheless, the water absorption behavior of these materials is one of the most critical factors for their performance over time. In this study, the water uptake characteristics of acrylic thermoplastic matrix composites reinforced separately with oil palm empty fruit bunch (OPEFB) and oil palm kernel shell (OPKS) were evaluated through immersion test in distilled water. The specimens of both composites were manufactured using the compression molding technique at three temperatures (80, 100, and 120 °C) using different particle sizes (425–600 and 600–850 µm). The composites, before and after the absorption test, were characterized by means of Fourier transform infrared spectroscopy, thermogravimetry, and scanning electron microscopy. The evaluation was complemented by the application of the Fickian diffusion model. Overall results showed that water absorption capacity decreased at a higher processing temperature and a larger particle size. In particular, it was observed that the type of reinforcement also influenced both water absorption and diffusivity. OPKS/acrylic and OPEFB/acrylic composites reached a maximum absorption of 77 and 86%, with diffusivities of 7.3 × 10−9 and 15.2 × 10−9 m2/min, respectively. Experimental evidence suggested that the absorption mechanism of the composites followed a non-Fickian model (n < 1.0).
Oil palm empty fruit bunch fibers (OPEFBF), in three size ranges (small: 250–450 µm, medium: 450–600 µm, large: 600–800 µm), were investigated as a filter-bed material in biofilters for the removal of organic matter and nutrients. After saturation, these fibers (post) were used in the removal of methylene blue through batch processes. The batch adsorption tests included optimizing the adsorbent dosage (0.5–32.0 g/L) and contact time (2.5–60.0 min). Experimental data were fitted to various kinetic/isotherm models. Instrumental characterization of both raw and post fibers was conducted. Post fibers underwent morphological/compositional changes due to the presence of microorganisms and their byproducts. Efficiencies reached up to 94% for chemical oxygen demand (COD), 88.4% for total nitrogen and 77.2% for total phosphorus. In batch adsorption, methylene blue removal exceeded 90%, underscoring the effectiveness of small raw OPEFBF and large post OPEFBF. Kinetic models indicated that raw OPEFBF better fit the pseudo-first-order model, while post OPEFBF better fit the pseudo-second-order model. Both types of OPEFBF showed a good fit with the Freundlich model (higher R2, lower χ2 and SSE). Particularly, large post OPEFBF stood out as the most efficient adsorbent, achieving a maximum adsorption capacity of 12.02 mg/g for methylene blue. Therefore, raw/post OPEFBF could be an alternative to remove contaminants from wastewater.
15 April 2022 in International Journal of Polymer Science
The prioritization of agroindustry fiber wastes as raw materials in development of composites has become a challenge to obtain higher value-added products with targeted applications. In this study, natural fiber-reinforced polymer matrix composites were elaborated using two fiber sizes (605μm and 633μm) of oil palm empty fruit bunch (OPEFB) and acrylic thermoplastic resin. In doing so, resin and fibers were mixed at room temperature by maintaining filler content of 42wt. for all formulations. In addition, thermomechanical compression moulding was used as composite manufacturing process at four processing temperatures (80, 100, 120, and 140C). All formulations were subsequently exposed to salt fog spray aging for 330 hours. The effects of accelerated aging process on mechanical, spectrophotometric, and thermogravimetric characteristics were studied. On the whole, results have shown feasibility to use a facile method to elaborate composites based on waterborne acrylic matrix and OPEFB fibers. After salt spray testing, it was observed detectable levels of Aspergillus spp. of fungi in all samples, as a result of phylogenetic organization of microbial activity. Tensile behavior of composites was significantly influenced by processing temperature and fiber size. In broad terms, their overall mechanical properties were improved by the increase of temperature. Additionally, infrared spectroscopy results showed important bands mainly associated to biodegradation of cellulose, hemicellulose, and lignin. On the other hand, two degradation stages were mainly identified in thermogravimetric evaluation. Noteworthy, aging had no significant effect on the thermal properties of composites.
Natural fibers used as reinforcements or fillers for materials development greatly affect properties and performance of end-use applications. As a consequence of conditioning processes such as grinding and sieving, average fiber length varies significantly. It is thus necessary to estimate the length as statistical data distribution rather than a single mean value. This approach implies length measurement of a significant number of fibers; however, a very high number of data points requires not only long-time frames but also significative amount of work. To address these issues, this article details a facile methodology to measure the length of a large number of natural fibers of oil palm empty fruit bunch (OPEFB) together with a statistical analysis to verify the correspondence between theoretical distributions and experimental data. Moreover, further information related to spectrophotometric, physico-chemical, mechanical, thermal, and morphological characteristics of OPEFB fibers coming from oil palm cultivation in Ecuador are presented. The data will contribute to comprehensively and rigorously describe the overall effects of natural fiber lengths on material properties.
The performance of natural fiber-reinforced polymer composites (NFRPCs) can be markedly affected by fiber length, to the extent that a sole mean value and standard deviation fail to accurately represent its overall dispersion. Hence, measuring the variability of fiber length is crucial to comprehend its influence on the properties of the resulting composites. Unfortunately, few studies have been conducted on this topic. This work consisted of two research stages: the first related to the effect of both fiber length distribution and processing temperature on the properties of oil palm empty fruit bunch (OPEFB) fiber-reinforced vinyl acrylic composites, while the second stage analyzed the influence of the fiber length distribution on the material performance under accelerated weathering tests. Broadly, composites were characterized by tensile mechanical testing, optical microscopy and SEM, FTIR spectroscopy, TGA, and microbiological analysis. The key results showed that processing the material at temperatures surpassing 75°C did not lead to a homogenous phase between the components, rendering it unworthy of consideration. Furthermore, composites containing the longest OPEFB fibers exhibited the lowest elongation-at-break values. Regarding the incidence of aging treatments, pronounced effects were observed in those composites exposed to UV radiation and salt fog. In detail, the elongation at break decreased by up to 34%, while the tensile strength increased by up to 1 MPa, and Young's modulus rose by up to 17%. Finally, two fungal genera, Fusarium sp. and Rhizophydium sp., were identified on the OPEFB fibers; nevertheless, no fungal growth was observed on the composites.
Agro-industrial residue valorization under the umbrella of the circular bioeconomy (CBE) has prompted the search for further forward-thinking alternatives that encourage the mitigation of the industry’s environmental footprint. From this perspective, second-life valorization (viz., thermoplastic composites) has been explored for agro-industrial waste (viz., oil palm empty fruit bunch fibers, OPEFBFs) that has already been used previously in other circular applications (viz., the removal of domestic wastewater contaminants). Particularly, this ongoing study evaluated the performance of raw residues (R-OPEFBFs) within three different size ranges (250–425, 425–600, 600–800 µm) both before and after their utilization in biofiltration processes (as post-adsorbents, P-OPEFBFs) to reinforce a polymer matrix of acrylic resin. The research examined the changes in R-OPEFBF composition and morphology caused by microorganisms in the biofilters and their impact on the mechanical properties of the composites. Smaller R-OPEFBFs (250–425 µm) demonstrated superior mechanical performance. Additionally, the composites with P-OPEFBFs displayed significant enhancements in their mechanical properties (3.9–40.3%) compared to those with R-OPEFBFs. The combination of the three fiber sizes improved the mechanical behavior of the composites, indicating the potential for both R-OPEFBFs and P-OPEFBFs as reinforcement materials in composite applications.