Globally, Rice (Oryza sativa) is one of the most important crops. In India cultivars majorly use wash root type seedlings for rice production. The objective of the study was to assess the influence of transplanting techniques for transplanting wash root paddy seedlings. Two types of mechanical transplanting techniques (two-row hand cranked rice transplanter and tractor operated rice transplanter) were evaluated for three different age of nursery and compared with manual transplanting. The performances for each technique were evaluated in terms of average hill spacing, missing index, multiple index, damage seedlings, floating/buried hills, number of hills/m2, planting efficiency, actual field capacity, field efficiency, energy required and cost of transplanting. Acquired results revealed that the best combination observed was tractor operated rice transplanter and 25 days of seedlings (desirability—0.764). The tractor operated rice transplanter increases the labor productivity by 32.22 times and saved about 66.69% average transplanting cost compared to manual transplanting, whereas it increases the labor productivity by 2.57 times and saved average 35.68% transplanting cost compared to hand crank rice transplanter. Manual transplanting causes non-uniform transplanting, higher missing index and cost of transplanting. Tractor operated rice transplanter at 25 days of seedlings was the best combination for transplanting due its superior techno-economics results.
This study was carried out to investigate the effect of the spading machine as a sustainable tillage tool at different depths of tillage on soil parameters. The spading machine was evaluated for two independent parameters: soil type and depth of cut. The observed dependent parameters were the bulk density of soil, mean clod size, soil strength, torque requirement, fuel consumption, and cost of operation. The bulk density varied from 1.18 to 1.39 g/cm3, the mean clod size between 12.72 and 68.37 mm, the soil strength between 69 and 4714.5 kPa, the torque requirement between 206 and 344.62 N-m, the fuel consumption between 13.60 and 21.83 l/ha, and cost of operation ranged between 2670.37 INR/ha (34.71 USD/ha) and 3635.87 INR/ha (47.27 USD/ha). It was observed that with the increase in tillage depth, the dependent parameters were also increasing, except the cost of operation varied nonsignificantly. In comparison to the spading machine, other primary tillage tools resulted in higher bulk density and fuel consumption, whereas mean clod size and cost of operation were reported higher except for the rotary tillage tool. Thus, the spading machine could be a sustainable tillage tool for long-term agricultural goals.