Internet of Things (IoT) represent a network of resource‐constrained sensor devices connected through the open Internet, susceptible to misuse by intruders. Traditional standalone intrusion detection systems (IDS) are tasked with monitoring device behaviours to identify malicious activities. These systems not only require extensive network and system resources but also cause delays in detecting a malicious actor due to unavailability of a comprehensive view of the intruder's activities. Collaboration among IoT devices enables considering knowledge from a collection of host and network devices to achieve improved detection accuracy in a timely manner. However, collaboration introduces the challenge of energy efficiency and event processing which is particularly significant for resource‐constrained devices. In this paper, we present a collaborative intrusion detection framework (COLIDE) for IoT leveraging collaboration among resource‐constrained sensor and border nodes for effective and timely detection of intruders. The paper presents a detailed formal description of the proposed framework along with analysis to assess its effectiveness for a typical IoT system. We implemented the COLIDE framework with Contiki OS and conducted thorough experimentation to evaluate its performance. The evaluation demonstrates efficiency of COLIDE framework with respect to energy and processing overheads achieving effectiveness within an IoT system.
28 May 2020 in International Journal of Online and Biomedical Engineering (iJOE)
This paper proposes a remote healthcare system which is referred to as Telemedicine. Telemedicine is a platform that estableshes a connection between the patient and the doctor. This platform belongs to the internet of medical things (IoMT) by enabling multiple medical sensors to connect to a server either using multiple communication technologies such as Wi-Fi, Bluetooth or GSM technologies. The system collects data from several sensors and sends them using one of the aforementioned technologies using an Arduino Board, while the interface is made with matlab and C#. Additionally, a comparative study between the three communications technologies used to connect the medical sensors to the server is investigated. And a recommendation of the best suited technology is provided with regard to the nature of the application itself.
The development of Underwater communications networks has become a hot topic in the research over the past few years. Many technologies are promising, however, they suffer from considerable latency, and larger attenuation with distance which degrades the overall network performance. This paper implements a low cost underwater communication network (UWCN) in order to investigate the effect of the operating frequency on the network performance during data transmission. The transmission of data is studied in three scenarios; Air-to-Air, Air-to-Water, and Water-to-Water scenarios. Furthermore, the performance of the network with two operating frequencies is examined in terms of the end-to-end delay, throughput, and packet loss.
Underwater communication (UWC) has become an attractive research field over the past few decades. This is mainly due to the increase in underwater applications such as exploration, monitoring, and warning systems. Traditional communications techniques face many obstacles when used underwater. Optical communications require line of sight which is not always maintained underwater due to turbulence. Acoustic communication does not suffer from that, however, it can only operate with very low rates. While radio frequency (RF) communication can only operate over short distances due to the attenuation from the water, it can deliver relatively high data rates and does not require line of sight nor affected by turbulence. Additionally, it does not suffer much when crossing the air–water boundaries. Moreover, underwater nodes require a new method of powering as it is not feasible to change their batteries when they are depleted. And so, we have investigated underwater solar power harvesters as a means to power the underwater nodes. In this paper, we design, implement, integrate, and test a low cost solar powered RF underwater modem to be used as a building block of an underwater wireless sensor network. The system was tested with multiple nodes to allow multi-hop communications in order to increase the communication distance. Results show that the network operates with a moderate to high throughput from end to end.