A hybrid optimization approach using analytical hierarchy process (AHP) combined with Taguchi-Grey has been developed and tested for the first time to optimize the stir–squeeze casting process parameters in the production of aluminium metal matrix composites reinforced with alumina for automotive brake disc application. The AHP method was used for assigning a weight to the response variables, which was based on experts’ opinion on the importance of the response variables for brake disc application. For producing brake discs, the optimum process parameters are found to be a squeeze pressure of 100 MPa, squeeze time of 45 s, die preheating temperature of 250°C and stirrer speed of 525 rpm. Also, a confirmatory analysis was carried out to validate these optimum process parameters, and the results indicated enhanced compressive strength of 433 MPa (18.5% increase) and reduced porosity of 5.29% (13.5% decrease) in the composite.
27 March 2018 in International Journal of Ambient Energy
In the recent times, the limitations on the exhaust emissions of the internal combustion engines are becoming increasingly rigorous due to environmental safety. Carbon monoxide, oxides of nitrogen, particulates and hydrocarbon are the prime noxious waste emitted by diesel engines. This experimental study involves the analysis of engine performance and emission characteristics of a single cylinder diesel engine with yttria- and ceria-stabilised zirconia coating on a cylinder liner and piston head. Varied dosing levels were added to diesel in both uncoated and coated engines. The experiment resulted in noticeable changes in the selected thermal barrier coating and dosing of cerium oxide additive nanoparticle in diesel. A surge of 2.1% in the brake thermal efficiency and downturn of 3% brake-specific fuel consumption when compared to standard diesel mode in the uncoated engine was discerned. Emission level of nitrogen oxide, carbon monoxide and hydrocarbon also underwent a considerable decline.
9 May 2019 in International Journal of Ambient Energy
The main source of transport is diesel. It adds to the overall economy's success, as it is widely used due to its high efficiency in combustion, versatility, unwavering quality and cost adequacy. One of the major sources of air pollution in the earth is emission from the diesel engine. Over the years, the need for biofuels has enabled Momordica charantia seed oil to become biodiesels. Momordica charantia seed oil having low calorific value contrasted with different biodiesels yet in addition upgraded us in making another alternative utilizing Momordica charantia seed oil which has lower emission and improvement in performance characteristics. In this exploration work, the emission and performance characteristics of biodiesel four blends of Momordica charantia seed oil with cerium oxide added substance are investigated. The results showed that B30 (69% diesel, 30% biodiesel and 1% cerium oxide) performs better than different blends.
7 May 2018 in Arabian Journal for Science and Engineering