Cesar D. Rivera-Tello

Dr. Cesar D. Rivera-Tello

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 March 2020 in Coatings
Verified
Journal Article
Open access
PDF file
CRCesar D. Rivera-Tello
Cesar D. Rivera-Tello
Esteban BroitmanEsteban Broitman
Esteban Broitman
FFFrancisco Javier Flores-Ruiz
Francisco Javier Flores-Ruiz
JPJonatan Perez-Alvarez
Jonatan Perez-Alvarez
MFM. Flores-Jiménez
M. Flores-Jiménez
Martín FloresMartín Flores
Martín Flores
The micro- and macro-tribological behaviors of a novel hierarchical TaN/Ta coating deposited on Ti6Al4V biomedical alloy by direct current magnetron sputtering were analyzed in the present work. This analysis was associated with the morphological, structural, and mechanical properties, as well as the roughness changes during and after the tribological tests. The wear track of the coating after the macro-tribology tests was evaluated by Raman spectroscopy in order to detect the compounds formed as a result of the tribo-reactions that occurred during the tests. Micro- and macro-tribology behaviors showed a significant wear rate reduction of the hierarchical coating in comparison to the Ti6Al4V substrate. For the case of the micro-tribology tests, this reduction was attributed to the high hardness of the coating (31.4 GPa); however, this hardness caused a considerable increment in the friction coefficient. On the other hand, the macro-tribology performance was associated with the hardness and the ability of the hierarchical architecture to prevent the propagation of cracks. Moreover, the friction coefficient increased considerably at the end of the test; this increment was associated with the tantalum oxides in the wear track detected by Raman spectroscopy.

4 October 2023 in RSC Advances
Verified
Journal Article
Open access
PDF file
CRCesar D. Rivera-Tello
Cesar D. Rivera-Tello
ARAminur Rahman
Aminur Rahman
SASamia Akter
Samia Akter
NYNymul Yeachin
Nymul Yeachin
TFTania Faruqe
Tania Faruqe
Jeong-Woo ChoiJeong-Woo Choi
Jeong-Woo Choi
Antimicrobial resistance (AMR) resulting from indiscriminate use of antibiotics in various fields of agriculture such as livestock farming, aquaculture, and croup fields become an emerging catatroph for the health (human, animal) and environment. Among those, poultry farming has been considered as one of the major contributors of multidrug-resistant (MDR) bacteria. Focusing this, the present research is designed for green synthesis of copper oxide nanoparticles (CuONPs) with the aim of their application in antibiotic-free poultry farming for curving use of antibiotics in that sector. For that, antibacterial CuONPs were nanoformulated to decrease the required doses of bulk CuSO4. We used a CuSO4·5H2O solution as a Cu2+ source and Citrus limon juice as a reducing agent as well as capping agent. Particle yield was initially confirmed by the λmax specific to CuONPs (295 nm) using UV-Vis spectroscopy. The presence of the Cu–O group during particle formation and crystallinity with the purity of yielded NPs was confirmed with Fourier-transform infrared spectroscopy and X-ray diffractometry. The round to spherical CuONPs of 92–155 nm average size was confirmed with atomic force, scanning electron, and transmission electron microscopy. The concentration of yielded NPs was calculated with the dynamic light scattering. The physical characterization tools indicated a maximum CuONPs yield with a 0.001 M ion source with 15% reducing agents after 12 h reduction. Antibacterial effectivity was tested against methicillin-resistant Staphylococcus aureus and tetracycline- and beta-lactamase-resistant Escherichia coli, confirmed by PCR amplicon band at 163 bp, 643 bp, and 577 bp for the mecA, blaTEM-1 and tetA genes, respectively. An antibiogram assay of CuONPs showed a maximum zone of inhibition of 26 ± 0.5 mm for the synthesized particles. The minimum inhibitory and bactericidal concentrations were 1.6 μg ml−1 and 3.1 μg ml−1, respectively, for broad-spectrum application. Finally, the biocompatibility of CuONPs was determined by demonstrating a nonsignificant decrease of BHK-21 cell viability at <2 MIC doses for complying their future in vivo applicability.

6 May 2020 in Carbon Letters
Verified
Journal Article
Closed access
PDF file
CRCesar D. Rivera-Tello
Cesar D. Rivera-Tello
FFFrancisco Javier Flores-Ruiz
Francisco Javier Flores-Ruiz
MFM. Flores
M. Flores
OJO. Jimenez
O. Jimenez
IFI. Farías
I. Farías
JOJ. Oseguera-Peña
J. Oseguera-Peña

11 October 2023 in RSC Advances
Verified
Journal Article
Open access
PDF file
CRCesar D. Rivera-Tello
Cesar D. Rivera-Tello
JGJ. A. Guerrero
J. A. Guerrero
LHL. Huerta
L. Huerta
FFFrancisco J. Flores-Ruiz
Francisco J. Flores-Ruiz
MFM. Flores
M. Flores
JQJ. G. Quiñones-Galván
J. G. Quiñones-Galván
Developing borophene films with good structural stability on non-metallic substrates to maximize their potential in photosensitivity, gas detection, photothermia, energy storage, and deformation detection, among others has been challenging in recent years. Herein, we succeeded in the pulsed laser deposition of multilayered borophene films on Si (100) with β12 or χ3 bonding by tuning the mean kinetic energy in the plasma during the deposition process. Raman and X-ray photoelectron spectroscopies confirm β12 and χ3 bonding in the films. Borophene films with β12 bonding were obtained by tuning a high mean kinetic energy in the plasma, while borophene with χ3 bonding required a relatively low mean kinetic energy. Atomic force microscopy (AFM) micrographs revealed a granular and directional growth of the multilayered borophene films following the linear atomic terraces from the (100) silicon substrate. AFM nanofriction was used to access the borophene surfaces and to reveal the pull-off force and friction coefficient of the films where the surface oxide showed a significant contribution. To summarize, we show that it is possible to deposit multilayered borophene thin films with different bondings by tuning the mean kinetic energy during pulsed laser deposition. The characterization of the plasma during borophene deposition accompanies our findings, providing support for the changes in kinetic energy.

24 September 2022 in Ceramics International
Verified
Journal Article
Closed access
CRCesar D. Rivera-Tello
Cesar D. Rivera-Tello
FFFrancisco Javier Flores-Ruiz
Francisco Javier Flores-Ruiz
MFM. Flores-Jiménez
M. Flores-Jiménez
Martín FloresMartín Flores
Martín Flores

1 October 2020 in Materials Letters
Verified
Journal Article
Closed access
IFI. Farías
I. Farías
OJO. Jimenez
O. Jimenez
Martín FloresMartín Flores
Martín Flores
CRCesar D. Rivera-Tello
Cesar D. Rivera-Tello
MGM.A. González
M.A. González
LOLuis Olmos
Luis Olmos