In this study, a parallel axial-flexural hinge model capable of representing postyield flexural behavior and considering interaction effects of axial force and moment is proposed for a simplified nonlinear progressive collapse analysis of welded steel moment frames. To this end, the load-resisting mechanism of the column-removed double-span beams was investigated based on the material and geometric nonlinear parametric finite-element analysis. A multilinear parallel point hinge model which captures the moment-axial tension interaction was then proposed. The emphasis was to develop a reliable and computationally efficient macromodel for practical progressive collapse analysis. The application of the proposed hinge model to nonlinear dynamic progressive collapse analysis was illustrated by using OpenSEES program. The accuracy as well as the efficiency of the proposed model was verified based on inelastic dynamic finite-element analysis results. The importance of including catenary action effects for proper ...
30 April 2018 in Journal of Korean Society of Steel Construction
각형강관 기둥을 이용한 모멘트 접합부는 주로 관통형 다이어프램 형식으로 사용되고 있으나, 제작 및 시공과정이 복잡하여 적용하는데 어려움이 있다. 본 연구에서 제안하는 강구조물 시스템은 단위 유닛 모듈(각형강관 기둥, H형강 보, 원웨이 볼트)을 현장으로 반입하여 볼트조립만으로 완성되는 것이다. 따라서 이 연구에서는 내부보강판의 길이, 내부보강판의 형상을 변수로 설정하여 제안된 기둥-보 접합부의 내력 및 강성, 연성능력, 에너지 소산능력을 비교 분석하여 제시된 강구조물 시스템을 평가하였다. A through diaphragm is often used to ensure their stiffness for moment-resisting connections using rectangular steel-tube column and H-shaped beam. The through-diaphragm connections, however, have some difficulties for their applicabilities to the field due to the complexity of the fabrication and construction processes. This study thus proposes a new modular system of steel structures assembled only using bolts without welding, by bringing a connection module composed of rectangular steel-tube column, H-shaped beam and oneway bolt onto the site. An experimental study to evaluate the seismic performance of the proposed connection details based on the new modular system is then conducted. The length and type of the inner reinforcement plate are considered as the primary design parameters, and the strength, stiffness, ductility and energy dissipation capability of the new connections are experimentally analyzed by comparison to those of conventional through diaphragm connections.
The single-degree-of-freedom (SDOF) analysis with elastic-plastic resistance is often used for design of protective structures subjected to blast loads. Several documents such as UFC 3-340-02 present design charts for the maximum responses of the elastic-plastic SDOF system. The SDOF design charts are available for far-field detonations but seldom for near-field detonations of high explosive in free air, noting that the focus of security design is the near-field. Further, the assumption of uniformly distributed load for the SDOF analysis may not be appropriate for the near-field detonations where blast pressure distribution varies significantly with distance and angle of incidence. In this paper, to resolve these issues, updated SDOF design charts including the response to the near-field detonations are suggested based on numerical calculations. These generated charts are verified with comparison to UFC 3-340-02 predictions and finite element analysis results of steel components. The recommendations and limitations for the utility of the SDOF design charts for blast assessment of steel components are provided with an emphasis on the near-field detonations.
27 December 2022 in Journal of Korean Society of Steel Construction