The emergence of hand-held Personal Laser Scanning (H-PLS) systems in recent years resulted in initial research on the possibility of its application in forest inventory, primarily for the estimation of the main tree attributes (e.g. tree detection, stem position, DBH, tree height, etc.). Research knowledge acquired so far can help to direct further research and eventually include H-PLS into operational forest inventory in the future. The main aims of this review are: - to present the current state of the art for H-PLS systems - briefly describe the fundamental concept and methods for H-PLS application in forest inventory - provide an overview of the results of previous studiesÞ emphasize pros and cons for H-PLS application in forest inventory in relation to conventional field measurements and other similar laser scanning systems - highlight the main issues that should be covered by further H-PLS-based forest inventory studies.

Spatially explicit information on tree species composition is important for both the forest management and conservation sectors. In combination with machine learning algorithms, very high-resolution satellite imagery may provide an effective solution to reduce the need for labor-intensive and time-consuming field-based surveys. In this study, we evaluated the possibility of using multispectral WorldView-3 (WV-3) satellite imagery for the classification of three main tree species (Quercus robur L., Carpinus betulus L., and Alnus glutinosa (L.) Geartn.) in a lowland, mixed deciduous forest in central Croatia. The pixel-based supervised classification was performed using two machine learning algorithms: random forest (RF) and support vector machine (SVM). Additionally, the contribution of gray level cooccurrence matrix (GLCM) texture features from WV-3 imagery in tree species classification was evaluated. Principal component analysis confirmed GLCM variance to be the most significant texture feature. Of the 373 visually interpreted reference polygons, 237 were used as training polygons and 136 were used as validation polygons. The validation results show relatively high overall accuracy (85%) for tree species classification based solely on WV-3 spectral characteristics and the RF classification approach. As expected, an improvement in classification accuracy was achieved by a combination of spectral and textural features. With the additional use of GLCM variance, the overall accuracy improved by 10% and 7% for RF and SVM classification approaches, respectively.

Quality tree species information gathering is the basis for making proper decisions in forest management. By applying new technologies and remote sensing methods, very high resolution (VHR) satellite imagery can give sufficient spatial detail to achieve accurate species-level classification. In this study, the influence of pansharpening of the WorldView-3 (WV-3) satellite imagery on classification results of three main tree species (Quercus robur L., Carpinus betulus L., and Alnus glutinosa (L.) Geartn.) has been evaluated. In order to increase tree species classification accuracy, three different pansharpening algorithms (Bayes, RCS, and LMVM) have been conducted. The LMVM algorithm proved the most effective pansharpening technique. The pixel- and object-based classification were applied to three pansharpened imageries using a random forest (RF) algorithm. The results showed a very high overall accuracy (OA) for LMVM pansharpened imagery: 92% and 96% for tree species classification based on pixel- and object-based approach, respectively. As expected, the object-based exceeded the pixel-based approach (OA increased by 4%). The influence of fusion on classification results was analyzed as well. Overall classification accuracy was improved by the spatial resolution of pansharpened images (OA increased by 7% for pixel-based approach). Also, regardless of pixel- or object-based classification approaches, the influence of the use of pansharpening is highly beneficial to classifying complex, natural, and mixed deciduous forest areas.

Tree height is one of the more fundamental measurements in forest inventories. In addition to classical field measurements, tree height may be estimated by remote sensing methods, such as by photogrammetric measurements of aerial images. Since it has been found and generally accepted that the extraction of forest and tree data from classical analogue aerial photographs has certain limitations, especially in the densely canopied forests, the usefulness of photogrammetric-based forest inventory in many countries remains a controversial issue. Therefore, this paper focuses on investigating the possibility of applying digital photogrammetric method to estimate mean stand height. Photogrammetric stereo-measurements of tree height were conducted on colour infrared images of high spatial resolution (ground sample distance – GSD – of 30 cm and 10 cm) using a digital photogrammetric workstation. The height of each tree within 183 sample plots (14 subcompartments) were calculated as the difference between the tree top elevations determined with the aerial images and the corresponding tree bottom elevations determined from the digital terrain model. To compare the photogrammetric- and field-estimated mean stand heights, the mean plot heights were calculated for both photogrammetric and field estimates of tree heights. Repeated measurements using ANOVA testing did not reveal a statistically significant difference (p > 0.05) between the field-estimated and photogrammetric-estimated mean stand heights using the 30 cm and 10 cm GSD digital aerial images. Deviations of the mean stand heights estimated using the images of both spatial resolutions were similar to the field-estimated heights. Using the 30 cm images the deviations of the photogrammetrically estimated mean stand height amounted to 0.35 m (1.59%) on average, whereas using the 10 cm images the deviations amounted to 0.31 m (1.41%) compared to the field estimation. Therefore, it can be concluded that the 30 cm GSD aerial images allow for the photogrammetric measurement of mean stand heights with accuracy similar to 10 cm GSD aerial images. In addition, 30 cm GSD aerial images are more favourable financially since the same area of interest could be covered with a considerably smaller number of images than of the 10 cm GSD aerial images.