The increasing energy demand and the ever more pressing need for clean technologies of energy conversion pose one of the most urgent and complicated issues of our age. Thermoelectricity, namely the direct conversion of waste heat into electricity, is a promising technique based on a long-standing physical phenomenon, which still has not fully developed its potential, mainly due to the low efficiency of the process. In order to improve the thermoelectric performance, a huge effort is being made by physicists, materials scientists and engineers, with the primary aims of better understanding the fundamental issues ruling the improvement of the thermoelectric figure of merit, and finally building the most efficient thermoelectric devices. In this Roadmap an overview is given about the most recent experimental and computational results obtained within the Italian research community on the optimization of composition and morphology of some thermoelectric materials, as well as on the design of thermoelectric and hybrid thermoelectric/photovoltaic devices.

This brief review covers the thermoelectric properties of one-dimensional materials, such as nanowires and nanotubes. The highly localised peaks of the electronic density of states near the Fermi levels of these nanostructured materials improve the Seebeck coefficient. Moreover, quantum confinement leads to discrete energy levels and a modified density of states, potentially enhancing electrical conductivity. These electronic effects, coupled with the dominance of Umklapp phonon scattering, which reduces thermal conductivity in one-dimensional materials, can achieve unprecedented thermoelectric efficiency not seen in two-dimensional or bulk materials. Notable advancements include carbon and silicon nanotubes and Bi₃Te₂, Bi, ZnO, SiC, and Si_1−xGe_x nanowires with significantly reduced thermal conductivity and increased ZT. In all these nanowires and nanotubes, efficiency is explored as a function of the diameter. Among these nanomaterials, carbon nanotubes offer mechanical flexibility and improved thermoelectric performance. Although carbon nanotubes theoretically have high thermal conductivity, the improvement of their Seebeck coefficient due to their low-dimensional structure can compensate for it. Regarding flexibility, economic criteria, ease of fabrication, and weight, carbon nanotubes could be a promising candidate for thermoelectric power generation.

The crystallographic and transport properties of thin films fabricated by pulsed laser deposition and belonging to the Sm _y (Fe _x Ni_1-x )₄Sb₁₂ filled skutterudite system were studied with the aim to unveil the effect exerted by temperature and duration of thermal treatments on structural and thermoelectric features. The importance of annealing treatments in Ar atmosphere up to 523 K was recognized, and the thermal treatment performed at 473 K for 3 h was selected as the most effective in improving the material properties. With respect to the corresponding bulk compositions, a significant enhancement in phase purity, as well as an increase in electrical conductivity and a drop in room temperature thermal conductivity, were observed in annealed films. The low thermal conductivity, in particular, can be deemed as deriving from the reduced dimensionality and the consequent substrate/film interfacial stress, coupled with the nanometric grain size.

The effect of SnO₂ addition (0, 1, 2, 4 wt.%) on thermoelectric properties of c-axis oriented Al-doped ZnO thin films (AZO) fabricated by pulsed laser deposition on silica and Al₂O₃ substrates was investigated. The best thermoelectric performance was obtained on the AZO + 2% SnO₂ thin film grown on silica, with a power factor (PF) of 211.8 μW/m·K² at 573 K and a room-temperature (300 K) thermal conductivity of 8.56 W/m·K. PF was of the same order of magnitude as the value reported for typical AZO bulk material at the same measurement conditions (340 μW/m·K²) while thermal conductivity κ was reduced about four times.