Alaa Mohammed

Dr. Alaa Mohammed

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 April 2020 in Polymers
Verified
Journal Article
Open access
PDF file
AMAlaa Mohammed
Alaa Mohammed
Gamal A. El-HitiGamal A. El-Hiti
Gamal A. El-Hiti
Emad YousifEmad Yousif
Emad Yousif
AAAhmed A. Ahmed
Ahmed A. Ahmed
Dina S. AhmedDina S. Ahmed
Dina S. Ahmed
MAMohammad Hayal Alotaibi
Mohammad Hayal Alotaibi
Poly(vinyl chloride) is a common plastic that is widely used in many industrial applications. Poly(vinyl chloride) is mixed with additives to improve its mechanical and physical properties and to enable its use in harsh environments. Herein, to protect poly(vinyl chloride) films against photoirradiation with ultraviolet light, a number of tin complexes containing valsartan were synthesized and their chemical structures were established. Fourier-transform infrared spectroscopy, weight loss, and molecular weight determination showed that the non-desirable changes were lower in the films containing the tin complexes than for the blank polymeric films. Analysis of the surface morphology of the irradiated polymeric materials showed that the films containing additives were less rough than the irradiated blank film. The tin complexes protected the poly(vinyl chloride) films against irradiation, where the complexes with high aromaticity were particularly effective. The additives act as primary and secondary stabilizers that absorb the incident radiation and slowly remit it to the polymeric chain as heat energy over time at a harmless level.

13 October 2020 in Surfaces
Verified
Journal Article
Open access
PDF file
BWBaraa Watheq
Baraa Watheq
Emad YousifEmad Yousif
Emad Yousif
MAMohammed H. Al-Mashhadani
Mohammed H. Al-Mashhadani
AMAlaa Mohammed
Alaa Mohammed
Dina S. AhmedDina S. Ahmed
Dina S. Ahmed
AJAli Jawad
Ali Jawad
In this work, three Ibuprofen tin complexes were synthesized and characterized by Fourier Transform Infrared spectroscopy (FTIR), 1H and 119Sn-Nuclear Magnetic Resonance (NMR), and Energy Dispersive X-ray (EDX) spectroscopies to identify the structures. The complexes were mixed separately with poly(vinyl chloride) (PVC) to improve its photo-stability properties. Their activity was demonstrated by several approaches of the FTIR to exhibit the formation of new groups within the polymer structure due to the exposure to UV light. Moreover, the polymer’s weight loss during irradiation and the average molecular weight estimation using its viscosity before and after irradiation were investigated. Furthermore, different techniques were used to study the surface morphology of the PVC before and after irradiation. Field-emission scanning electron microscopy (FESEM) and optical microscope demonstrated that applying Ibuprofen tin complexes keeps the surface of PVC smoother, with fewer cracks and spots after irradiation comparing to the blank PVC. Finally, It seems possible that such synthesized Ibuprofen tin complexes can work as excellent photo-stabilizers of PVC. In particular, complex 1 showed the best results among other stabilizers due to the large conjugation system of the stabilizer.

6 March 2020 in Materials
Verified
Journal Article
Open access
PDF file
AMAlaa Mohammed
Alaa Mohammed
Emad YousifEmad Yousif
Emad Yousif
Gamal A. El-HitiGamal A. El-Hiti
Gamal A. El-Hiti
To address global warming through carbon dioxide storage, three valsartan metal complexes were synthesized in excellent yields (87–92%) through a reaction of the appropriate metal chloride (tin chloride, nickel chloride hexahydrate, or magnesium chloride hexahydrate) and excess valsartan (two mole equivalents) in boiling methanol for 3 h. The structures of the metal complexes were established based on the data obtained from ultraviolet-visible, Fourier transform infrared, and proton nuclear magnetic resonance spectra, as well as from elemental analysis, energy-dispersive X-ray spectra, and magnetic susceptibility. The agglomeration and shape of the particles were determined using field emission scanning electron microscopy analysis. The surface area (16.63–22.75 m2/g) of the metal complexes was measured using the Brunauer-Emmett-Teller method, whereas the Barrett-Joyner-Halenda method was used to determine the particle pore size (0.011–0.108 cm3/g), total average pore volume (6.50–12.46 nm), and pore diameter (6.50–12.47 nm), for the metal complexes. The carbon dioxide uptake of the synthesized complexes, at 323 K and 4 MPa (40 bar), ranged from 24.11 to 34.51 cm2/g, and the nickel complex was found to be the most effective sorbent for carbon dioxide storage.

10 July 2022 in Polymers
Verified
Journal Article
Open access
PDF file
MFMarwa Fadhil
Marwa Fadhil
Emad YousifEmad Yousif
Emad Yousif
Dina Saadi AhmedDina Saadi Ahmed
Dina Saadi Ahmed
AMAlaa Mohammed
Alaa Mohammed
HHHassan Hashim
Hassan Hashim
Gamal A. El-HitiGamal A. El-Hiti
Gamal A. El-Hiti
Polyvinyl chloride is used in the manufacturing of a wide range of products, but it is susceptible to degradation if exposed to high temperatures and sunlight. There is therefore a need to continuously explore the design, synthesis, and application of new and improved additives to reduce the photodegradation of polyvinyl chloride in harsh environments and for outdoor applications. This research investigates the use of new norfloxacin–tin complexes as additives to inhibit the photodegradation of polyvinyl chloride to make it last longer. Reactions between norfloxacin and substituted tin chlorides, in different molar ratios and in methanol under reflux conditions, gave the corresponding organotin complexes in high yields. The chemical structures of the synthesized complexes were established, and their effect on the photodegradation of polyvinyl chloride due to ultraviolet-visible irradiation was investigated. Norfloxacin–tin complexes were added to polyvinyl chloride at very low concentrations and homogenous thin films were made. The films were irradiated for a period of up to 300 h, and the damage that occurred was assessed using infrared spectroscopy, polymeric materials weight loss, depression in molecular weight, and surface inspection. The degree of photodegradation in the polymeric materials was much less in the blends containing norfloxacin–tin complexes compared to the case where no additives were used. The use of the additives leads to a reduction in photodegradation (e.g., a reduction in the formation of short-chain polymeric fragments, weight loss, average molecular weight depletion, and roughness factor) of irradiated polyvinyl chloride. The norfloxacin–tin complexes contain aromatic moieties (aryl and heterocycle), heteroatoms (nitrogen, oxygen, and fluorine), and an acidic center (tin atom). Therefore, they act as efficient photostabilizers by absorbing the ultraviolet radiation and scavenging hydrogen chloride, peroxides, and radical species, thereby slowing the photodegradation of polyvinyl chloride.

3 March 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Dina Saadi AhmedDina Saadi Ahmed
Dina Saadi Ahmed
AMAlaa Mohammed
Alaa Mohammed
AHAmani A. Husain
Amani A. Husain
Gamal A. El-HitiGamal A. El-Hiti
Gamal A. El-Hiti
Mohammed KadhomMohammed Kadhom
Mohammed Kadhom
Emad YousifEmad Yousif
Emad Yousif
Polystyrene is a common thermoplastic and is produced in different shapes and forms. The scale of manufacture of polystyrene has grown over the years because of its numerous applications and low cost of production. However, it is flammable, brittle, has low resistance to chemicals, and is susceptible to photodegradation on exposure to ultraviolet radiation. There is therefore scope to improve the properties of polystyrene and to extend its useful lifetime. The current work reports the synthesis of organometallic complexes and investigates their use as photostabilizers for polystyrene. The reaction of excess ibuprofen sodium salt and appropriate metal chlorides in boiling methanol gave the corresponding complexes excellent yields. The organometallic complexes (0.5% by weight) were added to polystyrene and homogenous thin films were made. The polystyrene films blended with metal complexes were irradiated with ultraviolet light for extended periods of time and the stabilizing effects of the additives were assessed. The infrared spectroscopy, weight loss, depression in molecular weight, and surface morphology of the irradiated blends containing organometallic complexes were investigated. All the synthesized organometallic complexes acted as photostabilizers for polystyrene. The damage (e.g., formation of small polymeric fragments, decrease in weight and molecular weight, and irregularities in the surface) that took place in the polystyrene blends was much lower in comparison to the pure polystyrene film. The manganese-containing complex was very effective in stabilizing polystyrene and was superior to cobalt and nickel complexes.

26 August 2022 in Metals
Verified
Journal Article
Open access
PDF file
HMHussein H. Mujbil
Hussein H. Mujbil
LJLayla A. Al Jebur
Layla A. Al Jebur
Emad YousifEmad Yousif
Emad Yousif
Mohammed KadhomMohammed Kadhom
Mohammed Kadhom
AMAlaa Mohammed
Alaa Mohammed
HHHassan Hashim
Hassan Hashim
Modified poly(vinyl chloride) (PVC) films with organic groups (amino group from ethylene di-amine (en) and a suitable aromatic aldehyde from benzaldehyde (BEN)) were synthesized by casting using tetrahydrofuran (THF) solvent. The films were doped with four metal oxides nanoparticles (NPs), namely: CuO, Cr2O3, TiO2, and Co2O3, to improve the anti-photodegradation property. The films were irradiated with ultraviolet light and the resulting damage was assessed using different analytical and morphological techniques. These techniques included FTIR, 1H-NMR, and 13C-NMR spectroscopies that were used to examine the chemical structure, while another set of devices, namely optical microscope, scanning electronic microscopy (SEM), and atomic force microscope (AFM) were used to examine the morphology. In order to confirm that modified PVC acts as PVC photostabilizers, the roughness factor (Rq) was measured for the irradiated PVC films. The average Rq for irradiated blank PVC, modified PVC, modified PVC/CuO NPs, modified PVC/TiO2 NPs, modified PVC/Co2O3 NPs, and modified PVC/Cr2O3 NPs films were 368.3, 76.1, 62.6, 53.2, 45.8, and 33.8, respectively. Infrared spectroscopy and weight loss determination indicated that the films incorporated with additives showed less damage and fewer surface changes compared to the blank film. All mentioned additives acted as UV screeners against the UV light. The modified PVC/Cr2O3 NPs film showed the highest ability to resist the photo-degradation process based on the results data of FTIR spectra, weight loss, and surface morphology. In addition, after 300 h of irradiation, the weight percentage of modified PVC/Cr2O3 NPs film was 0.911 in contrast to the blank PVC, 2.896. Among the tested films, modified PVC/Cr2O3 NPs film showed the best results.