Carbon dioxide (CO₂) has been anticipated as an ideal carbon building block for organic synthesis due to the noble properties of CO₂, which are abundant renewable carbon feedstock, non-toxic nature, and contributing to a more sustainable use of resources. Several green and proficient routes have been established for chemical CO₂ fixation. Among the prominent routes, this review epitomizes the reactions involving cycloaddition of epoxides with CO₂ in producing cyclic carbonate. Cyclic carbonate has been widely used as a polar aprotic solvent, as an electrolyte in Li-ion batteries, and as precursors for various forms of chemical synthesis such as polycarbonates and polyurethanes. This review provides an overview in terms of the reaction mechanistic pathway and recent advances in the development of several classes of catalysts, including homogeneous organocatalysts (e.g., organic salt, ionic liquid, deep eutectic solvents), organometallic (e.g., mono-, bi-, and tri-metal salen complexes and non-salen complexes) and heterogeneous supported catalysts, and metal organic framework (MOF). Selection of effective catalysts for various epoxide substrates is very important in determining the cycloaddition operating condition. Under their catalytic systems, all classes of these catalysts, with regard to recent developments, can exhibit CO₂ cycloaddition of terminal epoxide substrates at ambient temperatures and low CO₂ pressure. Although highly desired conversion can be achieved for internal epoxide substrates, higher temperature and pressure are normally required. This includes fatty acid-derived terminal epoxides for oleochemical carbonate production. The production of fully renewable resources by employment of bio-based epoxy with biorefinery concept and potential enhancement of cycloaddition reactions are pointed out as well.

Reviews on Solid Oxide Fuel Cell Technology

Primarily produced via transesterification of lipid sources, fatty acid methyl ester (FAME) of biodiesel derived from insect larvae has gained momentum in a great deal of research done over other types of feedstock. From the self-harvesting nature of black soldier fly larvae (BSFL), research had, however, only concentrated on the harvest of BSFL on sixth instar. Through rearing BSFL on coconut endosperm waste (CEW), 100 BSFL were harvested at the fifth and sixth instar, then modification on CEW with mixed-bacteria powder was carried out. It was found that the fifth instar BSFL had 34% lipid content, which was 8% more than the sixth instar. Both instars had similar corrected protein contents around 35–38%. The sixth instar BSFL contained around 19% of chitin, which was about 11% more than the fifth instar. Biodiesel products from both instars showed no differences in terms of FAME content. With modification on CEW, at 0.5 wt% of mixed-bacteria powder concentration, the maximum waste-to-biomass conversion (WBC) and protein conversion (PC) were achieved at 9% and 60%, respectively. Moreover, even with the shorter fermentation time frame of CEW, it did not affect the development of BSFL in terms of its WBC and PC when fed with 14 and 21 days fermented medium. FAME from all groups set, which predominantly constituted about C12:0 at around 60%, followed by C14:0 at around 15%, C16:0, and C18:1 both at 10% on average. Lastly, the FAME yield from BSFL was improved from 25% (sixth instar) to 33% (fifth instar) and showed its highest at 38.5% with modification on raw CEW with 0.5 wt% mixed-bacteria powder and fermented for 21 days. Thus, harvesting BSFL at earlier instar is more beneficial and practical, as it improves the FAME yield from the BSFL biomass.