Grzegorz Straz

Dr. Grzegorz Straz

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 March 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GSGrzegorz Straz
Grzegorz Straz
ABArtur Borowiec
Artur Borowiec
The estimation of the unit weight of soil is carried out using laboratory methods; however, it requires high-quality research material in the form of samples with undisturbed structures, the acquisition of which, especially in the case of organic soils, is extremely difficult, time-consuming and expensive. This paper presents a proposal to use artificial neural networks to estimate the unit weight of local organic soils as leading parameters in the process of checking the load capacity of subsoil, under a direct foundation in drained conditions, in accordance with current standards guidelines. The initial recognition of the subsoil, and the locating of organic soils at the Theological and Pastoral Institute in Rzeszow, was carried out using a mechanical cone penetration test (CPTM), using various interpretation criteria, and then, material for laboratory tests was obtained. The analysis of the usefulness of the artificial intelligence method, in this case, was based on data from laboratory tests. Standard multi-layer backpropagation networks were used to predict the soil unit weight based on two leading variables: the organic content LOIT and the natural water content w. The applied neural model provided reliable prediction results, comparable to the standard regression methods.

10 September 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GSGrzegorz Straz
Grzegorz Straz
MSMałgorzata Szostek
Małgorzata Szostek
This study was conducted to verify the usefulness of the laser diffractometer method for determining the particle size distribution of selected organic soils from the Podkarpacie region in Poland. The soil selected for this research represented three main classification groups, namely, low-organic, medium-organic and high-organic soil, in accordance with the standard criterion. Particle size distribution was determined using two types of laser diffractometers: the Helos laser diffractometer manufactured by Sympatec GmbH (Clausthal-Zellerfeld, Germany) and the laser particle size analyzer Analysette 22 MicroTech plus manufactured by Fritsch GmbH (Idar-Oberstein, Germany). The standard mechanical and sedimentation methods, which are perfect for testing mineral soils, are not applicable to organic soils; therefore, a serious problem was found and examined. A reference method that could verify the test results obtained using the laser diffractometer methods was required. After analyzing the literature, the hydrometric (sedimentation) method was adopted as the reference method. Currently, there are no reliable and fully verified methods for testing soils with such a complex skeleton structure, and the resources, standards and guidelines concerning the issues discussed are extremely limited; therefore, new research methods are being sought to fill this gap, and this work is a step in this direction. The results of the conducted studies and analyses have shown that laser diffractometry methods can be useful for determining the particle size distribution of organic soils, but to a limited extent, depending mainly on the quantity of organic substances. The highest agreement was obtained by comparing the results of the sedimentation method with those obtained using the diffractometer analyzer Analysette 22 in the group of highly organic soils.

30 March 2022 in Archives of Civil Engineering
Verified
Journal Article
Open access
PDF file
GSGrzegorz Straz
Grzegorz Straz
This paper discusses the use of the Casagrande Cup and Cone Penetrometer Methods for determining the liquid limit of selected organic soils in in the southeastern region of Poland in laboratory conditions in accordance with the latest standard guidelines. 10 methods established on the basis of literature materials were used to interpret the test results: 4 for test in the Casagrande Cup and 6 for the Cone Penetrometer. The results were compared and used to determine the parameters necessary to assessment of consistency of all type of soils, e.g.: plasticity index 𝐼 𝑃 (%), consistency index 𝐼 𝐶 (-) or liquidity index 𝐼 𝐿 (-). The knowledge of these parameters makes it possible to determine the degree of plasticity of the tested soils using the Cassagrande chart. The conducted research and analyses have shown that the results of determining the liquid limit using the selected methods are not always comparable. The application of calculation methods based on the results of laboratory tests organic soils carried out in accordance with the procedures of the one standard (PN-B-04481: 1988), in the case of interpretation with Method No. 5 and Method No. 7, generated results with the widest range and the highest values in relation to the reference values (Method No. 1). In terms of the suitability of a given method, the type of tested soil, extremely complicated, diverse and heterogeneous structure turned out to be important, and most importantly, the content of organic parts, as evidenced by the results of consistency determination.

13 August 2018
Verified
Conference Paper
Open access
GSGrzegorz Straz
Grzegorz Straz
The proposal of investigations of soft organic soils in a new calibration chamber performed at the Rzeszow University of Technology has been presented in this paper. The unique feature of this chamber is the possibility of simultaneous soil testing with the use of two penetrometers: FVT (Field Vane Test) and DPL (Dynamic Probing Light). It has been possible due to the large size of the cylindrical soil sample: 62.5 cm in diameter and max. 80 cm high. Additionally, a construction with a new calibration chamber has been described, concerning potential capabilities and restrictions when conducting researches. The presented calibration chamber ensures the stability of the parameters set during the tests, which allows one to compare the test results and search for the relationship between the analyzed parameters. Shear strength from the FVT test was adopted as reference. The results of preliminary research were presented and a detailed research plan was prepared, which will be implemented in the next stages of the investigations.

15 September 2023 in Archives of Civil Engineering
Verified
Journal Article
Open access
PDF file
GSGrzegorz Straz
Grzegorz Straz
This paper deals with the problem of determining the particle size distribution of selected organic soils from the vicinity of Rzeszów (Poland), using a laser diffractometer method, the knowledge of which will allow to determine the degree of differentiation or similarity of the tested organic soils in this aspect. The HELOS Laser Diffractometer manufactured by Sympatec GmbH was used for the tests. For proper analysis, the researches results in the form of graphs were grouped according to the content of organic substances in accordance with the standard classification. The conducted research was primarily aimed at presenting the grain differentiation and particle size distribution in terms of the applied method and comparing the test results of samples of selected, different organic soils, prepared using the same dispersion procedure and carried out in exactly the same test conditions, generated using capabilities of a diffractometer. Summing up, the laser diffractometer method presented in the article, although not fully verified in the case of organic soils, seems to be a the perspective method with capabilities allowing it to be nominated as an exceptionally useful method for the investigations of soft soils, including organic soils.

18 August 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ABArtur Borowiec
Artur Borowiec
GSGrzegorz Straz
Grzegorz Straz
MSMaria Sulewska
Maria Sulewska
The aim of this study is to search for and verify regression models of selected geotechnical parameters of organic soils that are useful in engineering practices. Various machine learning methodologies were employed, including decision tree, ensembles of trees, support vector regression, Gaussian process, and neural networks. The work was based on two qualitatively different examples of estimating the unit weight of soil (γt). In the first example, the results of cone penetration test (CPT) probing (cone resistance qc and friction resistance fs) were used. In the second example, the results of laboratory tests of other physical properties of these soils (content of organic parts LOIT and moisture content w) were used. The task was completed for 135 sets of test results, which were carried out at the Rzeszów training ground in Poland with in situ tests using the CPT probe and laboratory tests. A statistical analysis was carried out to initially determine the relationships between the variables. This work presents the results of a comparison of multiple linear regression models with regression models obtained using the machine learning (ML) method. The studies obtained ML models with mean absolute percentage errors (MAPE) that were smaller than those of statistical models. Consequently, for the CPT sounding data, the MAPE changed from 13.57% to 7.37%, and, for the second data set, from 7.87% to 1.25%. Software STATISTICA version 13.3 and the Regression Learner TM library from MATLAB R2024b were used to analyze the soil data.