Wire and arc additive manufacturing based on cold metal transfer (WAAM-CMT) has aroused wide public concern in recent years as one of the most advanced technologies for manufacturing components with complex geometries. However, the microstructure and mechanical properties of the parts fabricated by WAAM-CMT technology mostly are intolerable for engineering application and should be improved necessarily. In this study, heat treatment was proposed to optimize the microstructure and enhance mechanical properties in the case of AlSi7Mg0.6 alloy. After heat treatment, the division between coarse grain zone and fine grain zone of as-deposited samples seemed to disappear and the distribution of Si and Mg elements was more uniform. What is more, the yield strength and ultimate tensile strength were improved significantly, while the ductility could be sustained after heat treatment. The improvement of strength is attributed to precipitation strengthening, and the shape change of Si phase. No reduction in ductility is due to the higher work hardening rate caused by nanostructured precipitate. It is proved that heat treatment as an effective method can control the microstructure and enhance comprehensive mechanical properties, which will boost rapid development of WAAM industrial technology.

With the rising demand for nuclear energy, the storage/transportation of radioactive nuclear by-products are critical safety issues for humans and the environment. These by-products are closely related to various nuclear radiations. In particular, neutron radiation requires specific protection by neutron shielding materials due to its high penetrating ability to cause irradiation damage. Herein, a basic overview of neutron shielding is presented. Since gadolinium (Gd) has the largest thermal neutron capture cross-section among various neutron absorbing elements, it is an ideal neutron absorber for shielding applications. In the last two decades, there have been many newly developed Gd-containing (i.e., inorganic nonmetallic-based, polymer-based, and metallic-based) shielding materials developed to attenuate and absorb the incident neutrons. On this basis, we present a comprehensive review of the design, processing methods, microstructure characteristics, mechanical properties, and neutron shielding performance of these materials in each category. Furthermore, current challenges for the development and application of shielding materials are discussed. Finally, the potential research directions are highlighted in this rapidly developing field.