This paper provides details and the results of an evaluation study carried out on the largest residential demand management program in Australia, the Sydney Water Corporation (SWC) ‘Every Drop Counts’ (EDC) residential retrofit program. The evaluation measured the water savings of program participants and compared them to a control group. Savings of 20.9 ± 2.5 kilolitres per household per annum (kL/hh/a) were found from statistical analysis of water meter readings of the sample of single residential households analysed. These individual savings effectively provide SWC with a potential total saving of 3,344 ± 400 megalitres per annum (ML/a) for the single residential houses retrofitted alone, i.e. 80% of the 200,000 households retrofitted to date. The evaluation identified that no ‘decay’ in average savings were found over the maximum four year period assessed. Other factors evaluated during the study included: analysis of individual water efficiency measures; comparison of savings with other evaluations; and savings related to occupancy ratio, geographical grouping, income category and defined socioeconomic categories.
Much can be learned from the numerous water recycling schemes currently in operation in Australia, especially with respect to making investment decisions based on uncertain assumptions. This paper illustrates through a number of case studies, that by considering the contextual and project related risks, a range of business related risks become apparent. Shifts in the contextual landscape and the various players’ objectives can occur over the life of a project, often leading to unforeseen risk and uncertainty. Through a thorough consideration of the potential risks presented in this paper, proponents as well as owners and managers might make better recycled water investment decisions, enhancing the benefits and minimizing the costs of water recycling schemes. This paper presents an overview and discussion of seven key factors to consider when planning a recycling scheme.
Drought and concern over climate change has led to the increased use of distributed water systems in Australia to supplement centralised supply systems. A literature review carried out by the Institute for Sustainable Futures (ISF) into the energy consumption of water infrastructure found that very little data on energy consumption exists, particularly for distributed systems. This paper reviews the findings of the literature review and presents results from a preliminary monitoring study on the energy implications of household rainwater systems. Typical household systems that are currently being installed in ouses cross Australia use approximately 1.5 kWh/kL.
The waste hierarchy currently dominates waste management planning in Australia. It is effective in helping planners consider options from waste avoidance or “reduction” through to providing infrastructure for landfill or other “disposal”. However, it is inadequate for guiding context-specific decisions regarding sustainable waste management and resource recovery, including the ability for stakeholders to compare a range of options on an equal footing whilst considering their various sustainability impacts and trade-offs. This paper outlines the potential use of Integrated Resource Planning (IRP) as a decision-making approach for the urban waste sector, illustrated using an Australian case study. IRP is well established in both the water and energy sectors in Australia and internationally. It has been used in long-term planning enabling decision-makers to consider the potential to reduce resource use through efficiency alongside options for new infrastructure. Its use in the waste sector could address a number of the current limitations experienced by providing a broader context-sensitive, adaptive, and stakeholder focused approach to planning not present in the waste hierarchy and commonly used cost benefit analysis. For both efficiency and new infrastructure options IRP could be useful in assisting governments to make decisions that are consistent with agreed objectives while addressing costs of alternative options and uncertainty regarding their environmental and social impacts. This paper highlights various international waste planning approaches, differences between the sectors where IRP has been used and gives a worked example of how IRP could be applied in the Australian urban waste sector.
This paper provides details of a preliminary least cost planning (LCP) assessment carried out for Canberra, the capital city of Australia, as part of the development of a 50 year Water Resources Strategy. In the assessment a suite of options consisting of demand management, source substitution, reuse and supply were developed to determine how to satisfy water demand requirements for the projected population over the 50 year planning horizon whilst also achieving the identified demand reduction targets. The options developed were then compared on an equal basis using the principles of LCP to identify the suite of lowest cost options to be considered for further analysis and implementation. The suite of demand management options developed was found to have the lowest whole of society levelised cost. Since the preliminary analysis and release of the Water Resources Strategy in April 2004, a water efficiency team has been set up to develop an implementation plan, implement options, develop an end use model, conduct pilot studies and undertake program evaluations.