The current global energy challenges require strategies to increase energy-independence across regions and individual countries in order to facilitate and foster the utilization of passive energy sources. As such, solar energy utilization for covering and offsetting building heating loads is a sustainable way to reduce energy consumption (electricity, gas etc.) for space heating. Trombe wall technology is a passive building solar heating system that can be modified and applied to mild and cold regions. This work presents a review of Trombe wall system’s feasibility and applications across different climatic regions. Trombe wall systems are applicable as a secondary space heating source in mid-sunshine and cold regions. However, a number of design and structural aspects must be thoroughly considered, including the incorporation of PCMs, and the integration of PV/BIPV elements and other performance-improving aspects to enhance the system’s thermal performance and output. The findings of this work can be used in potential future assessments of the Trombe wall system’s technology in different climatic regions.

Solar energy utilization for covering and offsetting the heating loads of buildings, is a sustainable way to reduce energy consumption (electricity, gas, etc.) for space heating. As such, a Trombe wall technology is a classic passive solar heating system used in buildings, that can be modified and applied to cold climate regions. This work presents a case study on a Trombe wall’s application in relation to its thermal energy output for space heating purposes at a factory building in central Latvia. The solar radiation and temperature measurements were carried out throughout the months of June to October. The results show that the examined wall has a monthly energy yield of 120 to 290 kWh, suggesting that Trombe wall systems are applicable as a secondary space heating source in cold climate regions such as northern Europe, however, a number of design and structural aspects have to be thoroughly considered.

Currently, the optimization of thermal energy consumption in buildings is considered a suitable alternative in the construction of new buildings, as a result of which the overall energy efficiency of the building increases. Thus, this study examined the efficiency and efficacy of different building renovation packages conducted across several buildings in Latvia and in Lithuania (across a larger building stock). In the first section of this study, 13 multi-apartment residential houses with 3 building renovation packages have been investigated in the city of Daugavpils, Latvia, in order to determine the actual reduction in heat energy consumption across each of the renovation implementation packages. The study findings indicate that changes in Latvian building regulations regarding insulation thickness did not significantly impact thermal energy consumption in fully renovated buildings. However, the combination of facade renovations, upgraded heating systems, and improved ventilation systems resulted in substantial energy savings, with an average reduction of 50.59% in thermal energy consumption for space heating across the reviewed multi-apartment residential building stock. In the following section of this study, the impact of the Energy Performance of Buildings Directive (EPBD) on building energy efficiency in Lithuania has been examined. The results show that over a 10-year period in the 2000s, Lithuanian building stock experienced a 20% increase in energy efficiency, followed by an additional 6.3% increase between 2010 and 2016. The mandatory requirement for renovated buildings to achieve a minimum energy efficiency class has resulted in significant reductions in energy consumption for heating purposes. The findings underscore the effectiveness of building renovation packages and the EPBD regulations in enhancing energy efficiency and promoting sustainable building practices. The importance of heat metering, consideration of indoor air temperature, and the need to address indoor air quality during renovations were also highlighted.

The stability of indoor air parameters is a very important factor, essential for such institutions as museums, schools and hospitals. Nowadays the use of renewable energy for space heating became one of the top priorities in modern building design. The active and passive solar energy as well as heat pumps are widely used nowadays. However, such technologies have a limitation in cold climates and often are not able to cover maximal heating loads. This paper is devoted to analysis of influence of building envelope's properties and outdoor air parameters on indoor air thermodynamic parameters stability in winter time. It presents analysis of thermal mass impact on building energy performance and indoor air parameter stability in cold climate. The results show that the thermal mass of building envelope is able to cover extreme winter temperatures as well as in case of emergency heat supply break.

The use of air conditioning technology is accompanied by an increase in electricity consumption, which is linked to an intensification of fossil fuel extraction. This in turn calls for developing cooling solutions of higher energy efficiency. The aim of this study is to examine energy consumption reduction of direct evaporative cooling technology for generating cool air in hot-dry climate regions. At the initial stage, already-installed air cooling equipment with a direct evaporative cooling system was studied for the creation of two regression models of electricity consumption representing the “on” and “off” sequences. Water consumption for system operation was taken into consideration. In the following stage, inlet water temperature dependence for pre-cooling purposes for the direct evaporative cooling system was studied. A mathematical model was developed and the subsequent calculations suggested that there is no need to pre-cool water before it enters the system and therefore consume additional energy. Practical application of this study is evaluated based on the case study in Dubai. The results of this study present significant energy saving potential for system operations of the direct evaporative cooling system of approximately 122 MWh per year. The return on investment for the equipment with direct evaporative cooling in case of an office building in Dubai featuring a hot desert climate is around 4.2 years. The purpose of this study is to examine the potential advantage of air cooling equipment with direct evaporative cooling technology compared to cooling equipment without this technology. The results provide the expediency of conducting further research in this area, in particular with regards to analyzing various materials for the adiabatic precooling pads, as well as the possibility of using a newly developed metal precooling pad.