Rapid object recognition in the industrial field is the key to intelligent manufacturing. The research on fast recognition methods based on deep learning was the focus of researchers in recent years, but the balance between detection speed and accuracy was not well solved. In this paper, a fast recognition method for electronic components in a complex background is presented. Firstly, we built the image dataset, including image acquisition, image augmentation, and image labeling. Secondly, a fast recognition method based on deep learning was proposed. The balance between detection accuracy and detection speed was solved through the lightweight improvement of YOLO (You Only Look Once)-V3 network model. Finally, the experiment was completed, and the proposed method was compared with several popular detection methods. The results showed that the accuracy reached 95.21% and the speed was 0.0794 s, which proved the superiority of this method for electronic component detection.

L-Lysine is produced by a complex non-linear fermentation process. A non-linear model predictive control (NMPC) scheme is proposed to control product concentration in real time for enhancing production. However, product concentration cannot be directly measured in real time. Least-square support vector machine (LSSVM) is used to predict product concentration in real time. Grey-Wolf Optimization (GWO) algorithm is used to optimize the key model parameters (penalty factor and kernel width) of LSSVM for increasing its prediction accuracy (GWO-LSSVM). The proposed optimal prediction model is used as a process model in the non-linear model predictive control to predict product concentration. GWO is also used to solve the non-convex optimization problem in non-linear model predictive control (GWO-NMPC) for calculating optimal future inputs. The proposed GWO-based prediction model (GWO-LSSVM) and non-linear model predictive control (GWO-NMPC) are compared with the Particle Swarm Optimization (PSO)-based prediction model (PSO-LSSVM) and non-linear model predictive control (PSO-NMPC) to validate their effectiveness. The comparative results show that the prediction accuracy, adaptability, real-time tracking ability, overall error and control precision of GWO-based predictive control is better compared to PSO-based predictive control.

The goal of this work is to improve the generalization of remaining useful life (RUL) prognostics for wheel hub bearings. The traditional life prognostics methods assume that the data used in RUL prognostics is composed of one specific fatigue damage type, the data used in RUL prognostics is accurate, and the RUL prognostics are conducted in the short term. Due to which, a generalizing RUL prognostics method is designed based on fault signal data. Firstly, the fault signal model is designed with the signal in a complex and mutative environment. Then, the generalizing RUL prognostics method is designed based on the fault signal model. Lastly, the simplified solution of the generalizing RUL prognostics method is deduced. The experimental results show that the proposed method gained good accuracies for RUL prognostics for all the amplitude, energy, and kurtosis features with fatigue damage types. The proposed method can process inaccurate fault signals with different kinds of noise in the actual working environment, and it can be conducted in the long term. Therefore, the RUL prognostics method has a good generalization.

This study describes the hypothetical approach to system design to collect and store electrical energy present in a flash of lightning. The system’s operations include the attraction and handling of the electrical charge obtained from lightning flashes. Performance differences arise from three different dielectric materials (rutile, mica and quartz) and the results define the estimated response of the storage system, including charge storage. All the results in this article were obtained through simulation or demonstrated mathematically showing the estimated outcomes of the system. The findings demonstrate that each dielectric material has its own advantages and disadvantages that influence the efficiency of the storage system. Through analysing the distinction of the three materials, it is observed that mica is the most suitable dielectric material, as it has the greatest dielectric strength, which is the main factor in the handling of charge.