This research presents an analysis of the five-position angle in both single-axis (one-axis tracking) and dual-axis (two-axis tracking) solar tracking systems. The study compares these tracking systems, where four solar panels move simultaneously, with a fixed solar panel system. The findings revealed that the five-position angle Sun-tracking technique resulted in lower energy consumption by the tracking mechanism than in the case of an all-time solar tracking system. The key component of the implemented system is a light-dependent resistor (LDR) sensor for controlling the motion of the motor for five positions on the vertical axis and horizontal axis, processed by a microcontroller to ensure the necessary solar tracking always moves in a perpendicular direction. According to the results, the voltage, current, and power increased with both one-axis and two-axis tracking compared to those of the fixed solar panel system under the same conditions. However, when evaluating the total energy with numerical integration methods, one-axis and two-axis provided 183.12 Wh and 199.79 Wh, respectively. Consequently, the energy production of the one-axis tracking system and the one-axis tracking system was found to be 16.71% and 24.97%, respectively, when compared to the fixed-axis system. Thus, the five-position angles of the sun-tracking technique resulted in lower energy consumption than is the case of an all-time solar tracking system.

This study examines the impact of students’ anxiety, due to online learning, in different learning environments: a synchronous (Zoom) and asynchronous learning environment (YouTube) to compare students’ conceptual understanding of electric circuits. Multiple linear regression and factor analyses were conducted to examine the factor of students’ anxiety and conceptual understanding. A sample of 99 vocational students participated in the study, including YouTube (n = 49) and Zoom (n = 50) groups. The DIRECT was used to diagnose test for conceptual understanding in the electric circuits, and OTAI was used to assess anxiety in online learning test. The OTAI consists of three factors: psychological, physiological, and online. The results showed that students’ anxiety, in some factors, affected their conceptual understanding of the electric circuits in both groups. However, there was a significant increase in conceptual understanding in both treatment groups. Although the students’ conceptual understanding had a slight increase, online learning has to improve to reduce the anxiety of learners.

The lifetime of a cast-resin transformer mainly depends on the condition of insulation material. Partial discharge (PD) is an important reason for insulation deterioration in cast-resin transformers. Identifying the position of PD is very necessary for damage assessment while the transformer is still operating, and the transformer is covered by housing. This paper proposes the investigation of a cast-resin transformer using an AE sensor and HFCT sensor to specify the precise source of PD. In this study, four AE sensors were used to find PD sources, and the high-frequency current transducer (HFCT) technique was used to identify the PD source and the criteria level. The experiment, in the first two parts, identified the possibility of PD, which includes the position of PD. The final part of the experiment verified the position of the PD source of a cast-resin transformer and confirmed the inspection results. AE and HFCT sensors can be used to detect the location of PD sources, confirming the position of the PD source by sensor detection. In addition, the evident partial discharge picture on the insulator surface of high voltage side. The process successfully and accurately identifies and locates the PD source.

Electroluminescence (EL) device is a new technology; its thickness is within micrometer range which can bend more easily and emit light. However, the thickness of ZnS:Cu phosphor layer may affect the light intensity, so we have analyzed the thickness of ZnS:Cu phosphor layer on EL device. The EL devices consist of ITO:PET/ZnS:Cu phosphor/insulator (BaTiO₃)/Ag electrode. The EL devices were fabricated in changing thickness 10 μm, 30 μm, and 50 μm. At 100 V 400 Hz, the luminance of EL devices was 51.22 cd/m² for thickness 30 μm more than that of 45.78 cd/m² (thickness: 10 μm) and 42.58 cd/m² (thickness: 50 μm). However, the peak light intensity was achieved at wavelength of 507 nm which was not influenced by the thickness of the ZnS:Cu phosphor. The use of the ZnS:Cu phosphor layer at thickness 30 μm in the EL device significantly improves the luminescence performance.

Dry powder food ingredients imported to Japan contain large amounts of viable bacteria and coliform bacteria, and we need a simple, low-cost, dry nonthermal decontamination method without spoiling nutrients, color, fragrance, and flavor. In this study, it is shown that the decontamination performance against viable bacteria and coliform bacteria is proportional to the plasma irradiation time when OH and O₃ radicals are incident on the dry powder food ingredients placed in an atmospheric-pressure nonequilibrium DC pulse discharge Ar+O₂ mixture gas plasma jet. Our study revealed that there is a correlation between the plasma irradiation time and DC pulse frequency increase and the decontamination effect on the general bacterial count.