Despite the efforts of developers, investors and scientific community, the successful development of a competitive wave energy industry is proving elusive. One of the most important barriers against wave energy conversion is the efficiency of the devices compared with all the associated costs over the lifetime of an electricity generating plant, which translates into a very high Levelised Cost of Energy (LCoE) compared to that of other renewable energy technologies such as wind or solar photovoltaic. Furthermore, the industrial roll-out of Wave Energy Converter (WEC) devices is severely hampered by problems related to their reliability and operability, particularly in open waters and during harsh environmental sea conditions. WEC technologies in multi-purpose breakwaters—i.e., a structure that retains its primary function of providing sheltered conditions for port operations to develop and includes electricity production as an added co-benefit—appears to be a promising approach to improve cost-effectiveness in terms of energy production. This paper presents the proof of concept study of a novel hybrid-WEC (HWEC) that uses two well understood power generating technologies, air and water turbines, integrated in breakwaters, by means of a composite modelling approach. Preliminary results indicate: firstly, hybridisation is an adequate approach to harness the available energy most efficiently over a wide range of metocean conditions; secondly, the hydraulic performance of the breakwater improves; finally, no evident negative impacts in the overall structural stability specific to the integration were observed.
The objective of an effective configuration for a series of groynes in an open channel is the attainment of large bed shear stress in the main channel for channel deepening and small sidewall shear stress in the groyne fields for bank protection with the lowest cost, i.e. with the largest spacing between groynes. A Reynolds-averaged Navier–Strokes, finite-volume, numerical model was used and it was validated against experimental data for the case of a single groyne. For series of groynes with uniform spacing between them, the most effective configuration was the one with spacing equal to six groyne lengths. For the range of parameters considered, a substantial improvement of the effectiveness was achieved by implementing a novel non-uniform configuration where the spacing between groynes was reduced to one and a half groyne lengths in the first four groyne fields, and remained equal to six groyne lengths in the subsequent ones.
A numerical study for the effect of crest width, breaking parameter, and trunk permeability on hydrodynamics and flow behavior in the vicinity of rubble-mound, permeable, zero-freeboard breakwaters (ZFBs) is presented. The modified two-dimensional Navier-Stokes equations for two-phase flows in porous media with a Smagorinsky model for the subgrid scale stresses were solved numerically. An immersed-boundary/level-set method was used. The numerical model was validated for the cases of wave propagation over a submerged impermeable trapezoidal bar and a low-crested permeable breakwater. Five cases of breakwaters were examined, and the main results are: (a) The size of the crest width, B, does not notably affect the wave reflection, vorticity, and currents in the seaward region of ZFBs, while wave transmission, currents in the leeward side, and mean overtopping discharge all decrease with increasing B. A non-monotonic behavior of the wave setup is also observed. (b) As the breaking parameter decreases, wave reflection, transmission, currents, mean overtopping discharge, and wave setup decrease. This observation is also verified by relevant empirical formulas. (c) As the ZFB trunk permeability decreases, an increase of the wave reflection, currents, wave setup, and a decrease of wave transmission and mean overtopping discharge is observed.
1 September 2019 in Journal of Waterway, Port, Coastal, and Ocean Engineering
Spilling breaking over beach profiles of varying slopes was studied numerically using an immersed-boundary/level-set method where both the bed profile and the free surface were immersed in a Cartesian grid. The combined water/air flow was governed by the incompressible Navier-Stokes equations and a Smagorinsky model for the subgrid scale stresses. The numerical model was validated by comparison to experimental data of waves breaking over a constant-slope beach. The examined beach profiles consisted of an outer region where the slope was constant and an inner region, which included the breaking point and the surf zone, where the slope was varying and the bed shape was concave. Eight cases were examined, and the main results are: (a) the decay coefficient of the wave-energy flux in the surf zone is correlated to the beach slope in the outer region; (b) the vorticity generation at the free surface and its distribution in the surf zone, as well as the intrawave velocity, the streaming boundary layer, and the undertow in the surf zone, are affected significantly by the varying slope in the inner region only for the cases of milder beach slope in the outer region; and (c) the effect of the normalized eddy-viscosity of the mean flow in the surf zone on the undertow profile is of the same order to the effect of the normalized net momentum gradient.