Dagmara Chmielewska-Śmietanko

Dr. Dagmara Chmielewska-Śmietanko

Laboratory of Material Research, Instytut Chemii i Techniki Jądrowej, Warsaw, Mazowieckie, Poland
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 November 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
UGURSZULA GRYCZKA
URSZULA GRYCZKA
ZZZbigniew Zimek
Zbigniew Zimek
MWMarta Walo
Marta Walo
DCDagmara Chmielewska-Śmietanko
Dagmara Chmielewska-Śmietanko
SBSylwester Bułka
Sylwester Bułka
Electron beam wastewater treatment is a very effective method for the destruction of organic and microbiological pollutants. The technology was implemented for municipal and textile industry wastewater treatment. Availability of electron accelerators characterized with different operation parameters make the technology applicable for different end-users and also for installation in confined spaces. In such a case, the design of wastewater irradiation room has to take into account the limited space available for shielding construction, which must restrict X-ray emission. Considering construction of an irradiation room for water treatment facility, it is important to focus not only on a stream formation for irradiation to achieve the desired electron penetration, but also on the reduction in x-ray generation. In the presented work, the X-ray field was tested, using modelling and experimental methods. The final results gave an advanced solution, which can be used in the installation of wastewater treatment, ballast and other types of origin, providing low cost shield and good radiation protection measures.

29 January 2025 in Energies
Verified
Journal Article
Open access
PDF file
KKKatarzyna Kiegiel
Katarzyna Kiegiel
DCDagmara Chmielewska-Śmietanko
Dagmara Chmielewska-Śmietanko
IHIrena Herdzik-Koniecko
Irena Herdzik-Koniecko
AMAgnieszka Miśkiewicz
Agnieszka Miśkiewicz
TSTomasz Smolinski
Tomasz Smolinski
Andrzej G ChmielewskiAndrzej G Chmielewski
Andrzej G Chmielewski
Nuclear power plants have the lowest life-cycle greenhouse gas emissions intensity and produce more electricity with less land use compared to any other low-carbon-emission-based energy source. There is growing global interest in Generation IV reactors and, at the same time, there is great interest in using small modular reactors. However, the development of new reactors introduces new engineering and chemical challenges critical to advancing nuclear energy safety, efficiency, and sustainability. For Generation III+ reactors, water chemistry control is essential to mitigate corrosion processes and manage radiolysis in the reactor’s primary circuit. Generation IV reactors, such as molten salt reactors (MSRs), face the challenge of handling and processing chemically aggressive coolants. Small modular reactor (SMR) technologies will have to address several drawbacks before the technology can reach technology readiness level 9 (TRL9). Issues related to the management of irradiated graphite from high-temperature reactors (HTR) must be addressed. Additionally, spent fuel processing, along with the disposal and storage of radioactive waste, should be integral to the development of new reactors. This paper presents the key chemical and engineering aspects related to the development of next-generation nuclear reactors and SMRs along with the challenges associated with them.

27 February 2024 in Energies
Verified
Journal Article
Open access
PDF file
DCDagmara Chmielewska-Śmietanko
Dagmara Chmielewska-Śmietanko
AMAgnieszka Miśkiewicz
Agnieszka Miśkiewicz
TSTomasz Smolinski
Tomasz Smolinski
GZGrażyna Zakrzewska-Koltuniewicz
Grażyna Zakrzewska-Koltuniewicz
Andrzej G ChmielewskiAndrzej G Chmielewski
Andrzej G Chmielewski
Poland is actively exploring the application of nuclear power as a substitute for its present reliance on fossil fuels for the generation of heat and electricity. This change reflects a calculated attempt to reduce carbon emissions, diversify the nation’s energy sources, and enhance the sustainability of its energy infrastructure. However, the implementation of nuclear technology faces many challenges, such as radiation exposure, the production of radioactive waste, the off-site effects of nuclear accidents, and high capital costs. Addressing such nuclear-safety-related issues is crucial for nuclear technology’s successful deployment. An extended analysis of the “coal-to-nuclear” process in terms of its safety has to be performed. Therefore, this review paper covers multidisciplinary studies related to the rollout of nuclear energy in Poland. The first stage of this study was the identification of the key areas of analysis, which included (i) formal requirements and recommendations imposed by international and national organizations on the process of designing and operating nuclear power systems; (ii) potential nuclear hazards for the personnel working at a nuclear reactor unit and the local population; (iii) the applied solutions of the security systems of a reactor itself, the steam turbine cycle, and the auxiliary infrastructure; and (iv) the management of spent nuclear fuel and radioactive waste. This methodology, developed based on a review of the literature and international standards, was tested for the selected country—Poland.

10 July 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Yongxia SunYongxia Sun
Yongxia Sun
Joana MadureiraJoana Madureira
Joana Madureira
GJGonçalo Justino
Gonçalo Justino
Sandra Cabo VerdeSandra Cabo Verde
Sandra Cabo Verde
DCDagmara Chmielewska-Śmietanko
Dagmara Chmielewska-Śmietanko
JWJianlong Wang
Jianlong Wang
Diclofenac (DCF) degradation in aqueous solution under electron beam (EB) irradiation after nanobubbling treatment was studied and compared with treatments using nanobubbling or EB irradiation alone. It was found that the removal efficiency of DCF increased by increasing the adsorbed dose, and it depended on the initial concentration of DCF in solution, being higher for the lower concentrations. Furthermore, when using the nanobubbling treatment alone, about 16% of the DCF was removed from the aqueous solution due to the OH radicals generated during the process. On the other hand, using EB treatment at 0.5 kGy, the degradation of DCF increased from 36% to 51% when adding a nanobubbling pretreatment before the EB radiation. At higher doses (5 kGy), the degradation of DCF was 96% using EB radiation and 99% using nanobubbling before EB radiation, indicating that the nanobubbling effect was not synergistic. With an increase in the adsorbed doses, EB radiation seemed to play a more important role on the degradation of DCF, probably due to the reactive species generated. Moreover, the solutions treated with nanobubbling and EB radiation presented higher COD values and radiolytic by-products with aromatic rings with chlorine. This work can support the development of innovative strategies to treat municipal wastewaters using ionizing radiation technologies.

24 July 2025 in Journal of Cleaner Production
Verified
Journal Article
Open access
Łukasz BartelaŁukasz Bartela
Łukasz Bartela
DHDorota Homa
Dorota Homa
Nils HaneklausNils Haneklaus
Nils Haneklaus
JOJakub Ochmann
Jakub Ochmann
Paweł GładyszPaweł Gładysz
Paweł Gładysz
ASAndrzej Sidło
Andrzej Sidło

1 June 2022 in Nukleonika
Verified
Journal Article
Open access
PDF file
DCDagmara Chmielewska-Śmietanko
Dagmara Chmielewska-Śmietanko
WŁWerner Łukasz
Werner Łukasz
UGURSZULA GRYCZKA
URSZULA GRYCZKA
WMWojciech Migdał
Wojciech Migdał
The outbreak of the COVID-19 pandemic has shown that the demand for medical masks and respirators exceeds the current global stockpile of these items, and there is a dire need to increase the production capacity. Considering that ionizing radiation has been used for sterilization of medical products for many years and electron beam (EB) irradiation enables the treatment of huge quantities of disposable medical products in a short time this method should be tested for the mask’s decontamination. In this work, three different filtering facepiece respirators (FFRs) were irradiated with electron beams of 12 kGy and 25 kGy. The results confirmed that the decrease in filtration efficiency after irradiation of all respirators results from the elimination of the electric charge from the polypropylene (PP) fibers in the irradiation process. Moreover, the applied doses may affect the thermal stability of PP fabrics, while filtering materials structure and integrity have not changed after irradiation.