The rapid development in aerial digital cameras in combination with the increased availability of high-resolution Digital Elevation Models (DEMs) provides a renaissance for photogrammetry in forest management planning. Tree height, stem volume, and basal area were estimated for forest stands using canopy height, density, and texture metrics derived from photogrammetric matching of digital aerial images and a high-resolution DEM. The study was conducted at a coniferous hemi-boreal site in southern Sweden. Three different data-sets of digital aerial images were used to test the effects of flight altitude and stereo overlap on an area-based estimation of forest variables. Metrics were calculated for 344 field plots (10 m radius) from point cloud data and used in regression analysis. Stand level accuracy was evaluated using leave-one-out cross validation of 24 stands. For these stands the tree height ranged from 4.8 to 26.9 m (17.8 m mean), stem volume 13.3 to 455 m³ ha⁻¹ (250 m³ ha⁻¹ mean), and basal area from 4.1 to 42.9 m² ha⁻¹ (27.1 m² ha⁻¹ mean) with mean stand size of 2.8 ha. The results showed small differences in estimation accuracy of forest variables between the data-sets. The data-set of digital aerial images corresponding to the standard acquisition of the Swedish National Land Survey (Lantmäteriet), showed Root Mean Square Errors (in percent of the surveyed stand mean) of 8.8% for tree height, 13.1% for stem volume and 14.9% for basal area. The results imply that photogrammetric matching of digital aerial images has significant potential for operational use in forestry.

Data assimilation techniques were used to estimate forest stand data in 2011 by sequentially combining remote sensing based estimates of forest variables with predictions from growth models. Estimates of stand data, based on canopy height models obtained from image matching of digital aerial images at six different time-points between 2003 and 2011, served as input to the data assimilation. The assimilation routines were built on the extended Kalman filter. The study was conducted in hemi-boreal forest at the Remningstorp test site in southern Sweden (lat. 13°37′ N; long. 58°28′ E). The assimilation results were compared with two other methods used in practice for estimation of forest variables: the first was to use only the most recent estimate obtained from remotely sensed data (2011) and the second was to forecast the first estimate (2003) to the endpoint (2011). All three approaches were validated using nine 40 m radius validation plots, which were carefully measured in the field. The results showed that the data assimilation approach provided better results than the two alternative methods. Data assimilation of remote sensing time series has been used previously for calibrating forest ecosystem models, but, to our knowledge, this is the first study with real data where data assimilation has been used for estimating forest inventory data. The study constitutes a starting point for the development of a framework useful for sequentially utilizing all types of remote sensing data in order to provide precise and up-to-date estimates of forest stand parameters.

Discrimination of deciduous trees using spectral information from aerial images has only been partly successfully due to the complexity of the reflectance at different view angles, times of acquisition, phenology of the trees and inter-tree radiance. Therefore, the objective was to evaluate the accuracy of estimating the proportion of deciduous stem volume (P) utilizing change detection between canopy height models (CHMs) generated by digital photogrammetry from leaf-on and leaf-off aerial images instead of using spectral information. The study was conducted at a hemi-boreal study area in Sweden. Using aerial images from three seasons, CHMs with a resolution of approximately 0.5 m were generated using semi-global matching. For training plots, metrics describing the change between leaf-on and leaf-off conditions were calculated and used to model the continuous variable P, using the Random Forest approach. Validated at sub-stands, the estimation accuracy of P in terms of root mean square error and bias was found to be 18% and −6%, respectively. The overall classification accuracy, using four equally wide classes, was 83% with a kappa value of 0.68. The validation plots in classes of high proportion of coniferous or deciduous stem volume were well classified, whereas the mixed forest classes showed lower classification accuracies.

Multispectral imagery from unmanned aerial vehicles (UAVs) can provide high-resolution data to map tree mortality caused by pests or diseases. Although many studies have investigated UAV-imagery-based methods to detect trees under acute stress followed by tree mortality, few have tested the feasibility and accuracy of detecting trees under chronic stress. This study aims to develop methods and test how well UAV-based multispectral imagery can detect pine needle disease long before tree mortality. Multispectral images were acquired four times through the growing season in an area with pine trees infected by needle pathogens. Vegetation indices (VIs) were used to quantify the decline in vitality, which was verified by tree needle retention (%) estimated from the ground. Results showed that several VIs had strong correlations with the needle retention level and were used to identify severely defoliated trees (75% needle retention) was very low. The results from one study area also implied more defoliation observed from the UAV (top view) than from the ground (bottom view). We conclude that using UAV-based multispectral imagery can efficiently identify severely defoliated trees caused by needle-cast pathogens, thus assisting forest health monitoring.

The nation-wide Airborne Laser Scanning (ALS) currently performed by the Swedish National Land Survey will provide a new and accurate Digital Elevation Model (DEM). These data will enable new and cost-efficient assessments of vegetation height using Canopy Height Models (CHMs) derived as the difference between a Digital Surface Model (DSM) and the DEM. In this context, the High Resolution Stereoscopic (HRS) sensor onboard SPOT-5 and the airborne Z/I Digital Mapping Camera (DMC) used for operational aerial photography by the Swedish National Land Survey are of main interest. Previous research has shown that reliable tree height data are a powerful source of information for forest management planning. This study investigated the possibilities to map forest variables using CHMs derived from either the SPOT-5 HRS or Z/I DMC sensor together with ALS DEM data, in combination with spectral data from the SPOT-5 High Resolution Geometric (HRG) sensor. The results when using the Z/I DMC CHM in combination with SPOT-5 HRG data showed Root Mean Square Errors for standwise prediction of mean tree height, stem diameter, and stem volume of 7.3%, 9.0%, and 19%, respectively. The SPOT-5 HRS CHM in combination with SPOT-5 HRG data improved the SPOT HRG based estimates from 13% to 10%, 15% to 13%, and 31% to 23%, for tree height, stem diameter, and stem volume, respectively. Adding CHM data to a SPOT-5 HRG based prediction model improved the mapping accuracy between 13% to 44%. In conclusion, the obtained accuracies may be sufficient for operational forest management planning.